interfaceId

supportsInterface

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}


ERC165

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


IERC165

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}


EnumerableSet

vault

delegate

value

DelegateForAll

contract_

DelegateForContract

tokenId

DelegateForToken

RevokeAllDelegates

RevokeDelegate

checkDelegateForAll

checkDelegateForContract

checkDelegateForToken

delegateForAll

delegateForContract

delegateForToken

getContractLevelDelegations

contractDelegations

getDelegatesForAll

delegates

getDelegatesForContract

getDelegatesForToken

getDelegationsByDelegate

info

getTokenLevelDelegations

tokenDelegations

revokeAllDelegates

revokeDelegate

revokeSelf

DelegationRegistry

delegations

// SPDX-License-Identifier: CC0-1.0
pragma solidity ^0.8.17;

/**
 * @title An immutable registry contract to be deployed as a standalone primitive
 * @dev See EIP-5639, new project launches can read previous cold wallet -> hot wallet delegations
 * from here and integrate those permissions into their flow
 */
interface IDelegationRegistry {
    /// @notice Delegation type
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        TOKEN
    }

    /// @notice Info about a single delegation, used for onchain enumeration
    struct DelegationInfo {
        DelegationType type_;
        address vault;
        address delegate;
        address contract_;
        uint256 tokenId;
    }

    /// @notice Info about a single contract-level delegation
    struct ContractDelegation {
        address contract_;
        address delegate;
    }

    /// @notice Info about a single token-level delegation
    struct TokenDelegation {
        address contract_;
        uint256 tokenId;
        address delegate;
    }

    /// @notice Emitted when a user delegates their entire wallet
    event DelegateForAll(address vault, address delegate, bool value);

    /// @notice Emitted when a user delegates a specific contract
    event DelegateForContract(address vault, address delegate, address contract_, bool value);

    /// @notice Emitted when a user delegates a specific token
    event DelegateForToken(address vault, address delegate, address contract_, uint256 tokenId, bool value);

    /// @notice Emitted when a user revokes all delegations
    event RevokeAllDelegates(address vault);

    /// @notice Emitted when a user revoes all delegations for a given delegate
    event RevokeDelegate(address vault, address delegate);

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Allow the delegate to act on your behalf for all contracts
     * @param delegate The hotwallet to act on your behalf
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForAll(address delegate, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific contract
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForContract(address delegate, address contract_, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific token
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForToken(address delegate, address contract_, uint256 tokenId, bool value) external;

    /**
     * @notice Revoke all delegates
     */
    function revokeAllDelegates() external;

    /**
     * @notice Revoke a specific delegate for all their permissions
     * @param delegate The hotwallet to revoke
     */
    function revokeDelegate(address delegate) external;

    /**
     * @notice Remove yourself as a delegate for a specific vault
     * @param vault The vault which delegated to the msg.sender, and should be removed
     */
    function revokeSelf(address vault) external;

    /**
     * -----------  READ -----------
     */

    /**
     * @notice Returns all active delegations a given delegate is able to claim on behalf of
     * @param delegate The delegate that you would like to retrieve delegations for
     * @return info Array of DelegationInfo structs
     */
    function getDelegationsByDelegate(address delegate) external view returns (DelegationInfo[] memory);

    /**
     * @notice Returns an array of wallet-level delegates for a given vault
     * @param vault The cold wallet who issued the delegation
     * @return addresses Array of wallet-level delegates for a given vault
     */
    function getDelegatesForAll(address vault) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault and contract
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract you're delegating
     * @return addresses Array of contract-level delegates for a given vault and contract
     */
    function getDelegatesForContract(address vault, address contract_) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault's token
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract holding the token
     * @param tokenId The token id for the token you're delegating
     * @return addresses Array of contract-level delegates for a given vault's token
     */
    function getDelegatesForToken(address vault, address contract_, uint256 tokenId)
        external
        view
        returns (address[] memory);

    /**
     * @notice Returns all contract-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of ContractDelegation structs
     */
    function getContractLevelDelegations(address vault)
        external
        view
        returns (ContractDelegation[] memory delegations);

    /**
     * @notice Returns all token-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of TokenDelegation structs
     */
    function getTokenLevelDelegations(address vault) external view returns (TokenDelegation[] memory delegations);

    /**
     * @notice Returns true if the address is delegated to act on the entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForAll(address delegate, address vault) external view returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a token contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForContract(address delegate, address vault, address contract_)
        external
        view
        returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a specific token, the token's contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForToken(address delegate, address vault, address contract_, uint256 tokenId)
        external
        view
        returns (bool);
}


IDelegationRegistry

delegate.xyz is the best solution to secure valuable onchain assets while still participating in NFT airdrop claims, token governance, and more. Users link cold wallets with hot wallets, and then the hot wallet can act on behalf of the cold wallet, like crypto power-of-attorney.