Token that pays dividends, and has a fee on buys and sells. Users hold the token, and they receive LP over time that they can claim from the contract. Used in the VIRAL project.
Address :
VIRAL :
allowance(address,address) :
See {IERC20-allowance}.
approve(address,uint256) :
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
excludeFromDividends(address,bool) :
"true" to exlcude, "false" to include
forceSend() :
It will send all ETH to treasuryWallet
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
setAutomatedMarketMakerPair(address,bool) :
Set new pairs created due to listing in new DEX
setSwapEnabled(bool) :
Set "true" to enable internal swaps for liquidity, treasury and dividends
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
withdrawDividend() :
It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
withdrawDividend() :
It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
Ownable :
constructor :
Initializes the contract setting the deployer as the initial owner.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
IFactory :
IPair :
IRouter :
IERC20 :
Interface of the ERC20 standard as defined in the EIP.
Approval(address,address,uint256) :
Emitted when the allowance of a `spender` for an `owner` is set by a call to {approve}. `value` is the new allowance.
Transfer(address,address,uint256) :
Emitted when `value` tokens are moved from one account (`from`) to another (`to`). Note that `value` may be zero.
allowance(address,address) :
Returns the remaining number of tokens that `spender` will be allowed to spend on behalf of `owner` through {transferFrom}. This is zero by default. This value changes when {approve} or {transferFrom} are called.
approve(address,uint256) :
Sets `amount` as the allowance of `spender` over the caller's tokens. Returns a boolean value indicating whether the operation succeeded. IMPORTANT: Beware that changing an allowance with this method brings the risk that someone may use both the old and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards: https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 Emits an {Approval} event.
balanceOf(address) :
Returns the amount of tokens owned by `account`.
totalSupply() :
Returns the amount of tokens in existence.
transfer(address,uint256) :
Moves `amount` tokens from the caller's account to `recipient`. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
transferFrom(address,address,uint256) :
Moves `amount` tokens from `sender` to `recipient` using the allowance mechanism. `amount` is then deducted from the caller's allowance. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
IERC20Metadata :
Interface for the optional metadata functions from the ERC20 standard. _Available since v4.1._
allowance(address,address) :
Returns the remaining number of tokens that `spender` will be allowed to spend on behalf of `owner` through {transferFrom}. This is zero by default. This value changes when {approve} or {transferFrom} are called.
approve(address,uint256) :
Sets `amount` as the allowance of `spender` over the caller's tokens. Returns a boolean value indicating whether the operation succeeded. IMPORTANT: Beware that changing an allowance with this method brings the risk that someone may use both the old and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards: https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 Emits an {Approval} event.
balanceOf(address) :
Returns the amount of tokens owned by `account`.
decimals() :
Returns the decimals places of the token.
name() :
Returns the name of the token.
symbol() :
Returns the symbol of the token.
totalSupply() :
Returns the amount of tokens in existence.
transfer(address,uint256) :
Moves `amount` tokens from the caller's account to `recipient`. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
transferFrom(address,address,uint256) :
Moves `amount` tokens from `sender` to `recipient` using the allowance mechanism. `amount` is then deducted from the caller's allowance. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
ERC20 :
Implementation of the {IERC20} interface. This implementation is agnostic to the way tokens are created. This means that a supply mechanism has to be added in a derived contract using {_mint}. For a generic mechanism see {ERC20PresetMinterPauser}. TIP: For a detailed writeup see our guide https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How to implement supply mechanisms]. We have followed general OpenZeppelin guidelines: functions revert instead of returning `false` on failure. This behavior is nonetheless conventional and does not conflict with the expectations of ERC20 applications. Additionally, an {Approval} event is emitted on calls to {transferFrom}. This allows applications to reconstruct the allowance for all accounts just by listening to said events. Other implementations of the EIP may not emit these events, as it isn't required by the specification. Finally, the non-standard {decreaseAllowance} and {increaseAllowance} functions have been added to mitigate the well-known issues around setting allowances. See {IERC20-approve}.
allowance(address,address) :
See {IERC20-allowance}.
approve(address,uint256) :
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
constructor :
Sets the values for {name} and {symbol}. The default value of {decimals} is 18. To select a different value for {decimals} you should overload it. All two of these values are immutable: they can only be set once during construction.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
SafeMath :
SafeMathInt :
Math operations for int256 with overflow safety checks.
SafeMathUint :
Math operations with safety checks that revert on error
DividendPayingTokenInterface :
An interface for a dividend-paying token contract.
DividendWithdrawn(address,uint256) :
This event MUST emit when an address withdraws their dividend.
DividendsDistributed(address,uint256) :
This event MUST emit when ether is distributed to token holders.
SHOULD transfer `dividendOf(msg.sender)` wei to `msg.sender`, and `dividendOf(msg.sender)` SHOULD be 0 after the transfer. MUST emit a `DividendWithdrawn` event if the amount of ether transferred is greater than 0.
Token that pays dividends, and has a fee on buys and sells. Users hold the token, and they receive LP over time that they can claim from the contract. Used in the VIRAL project.
Address :
VIRAL :
allowance(address,address) :
See {IERC20-allowance}.
approve(address,uint256) :
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
excludeFromDividends(address,bool) :
"true" to exlcude, "false" to include
forceSend() :
It will send all ETH to treasuryWallet
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
setAutomatedMarketMakerPair(address,bool) :
Set new pairs created due to listing in new DEX
setSwapEnabled(bool) :
Set "true" to enable internal swaps for liquidity, treasury and dividends
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
withdrawDividend() :
It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
withdrawDividend() :
It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
Ownable :
constructor :
Initializes the contract setting the deployer as the initial owner.
owner() :
Returns the address of the current owner.
renounceOwnership() :
Leaves the contract without owner. It will not be possible to call `onlyOwner` functions anymore. Can only be called by the current owner. NOTE: Renouncing ownership will leave the contract without an owner, thereby removing any functionality that is only available to the owner.
transferOwnership(address) :
Transfers ownership of the contract to a new account (`newOwner`). Can only be called by the current owner.
IFactory :
IPair :
IRouter :
IERC20 :
Interface of the ERC20 standard as defined in the EIP.
Approval(address,address,uint256) :
Emitted when the allowance of a `spender` for an `owner` is set by a call to {approve}. `value` is the new allowance.
Transfer(address,address,uint256) :
Emitted when `value` tokens are moved from one account (`from`) to another (`to`). Note that `value` may be zero.
allowance(address,address) :
Returns the remaining number of tokens that `spender` will be allowed to spend on behalf of `owner` through {transferFrom}. This is zero by default. This value changes when {approve} or {transferFrom} are called.
approve(address,uint256) :
Sets `amount` as the allowance of `spender` over the caller's tokens. Returns a boolean value indicating whether the operation succeeded. IMPORTANT: Beware that changing an allowance with this method brings the risk that someone may use both the old and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards: https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 Emits an {Approval} event.
balanceOf(address) :
Returns the amount of tokens owned by `account`.
totalSupply() :
Returns the amount of tokens in existence.
transfer(address,uint256) :
Moves `amount` tokens from the caller's account to `recipient`. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
transferFrom(address,address,uint256) :
Moves `amount` tokens from `sender` to `recipient` using the allowance mechanism. `amount` is then deducted from the caller's allowance. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
IERC20Metadata :
Interface for the optional metadata functions from the ERC20 standard. _Available since v4.1._
allowance(address,address) :
Returns the remaining number of tokens that `spender` will be allowed to spend on behalf of `owner` through {transferFrom}. This is zero by default. This value changes when {approve} or {transferFrom} are called.
approve(address,uint256) :
Sets `amount` as the allowance of `spender` over the caller's tokens. Returns a boolean value indicating whether the operation succeeded. IMPORTANT: Beware that changing an allowance with this method brings the risk that someone may use both the old and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards: https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 Emits an {Approval} event.
balanceOf(address) :
Returns the amount of tokens owned by `account`.
decimals() :
Returns the decimals places of the token.
name() :
Returns the name of the token.
symbol() :
Returns the symbol of the token.
totalSupply() :
Returns the amount of tokens in existence.
transfer(address,uint256) :
Moves `amount` tokens from the caller's account to `recipient`. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
transferFrom(address,address,uint256) :
Moves `amount` tokens from `sender` to `recipient` using the allowance mechanism. `amount` is then deducted from the caller's allowance. Returns a boolean value indicating whether the operation succeeded. Emits a {Transfer} event.
ERC20 :
Implementation of the {IERC20} interface. This implementation is agnostic to the way tokens are created. This means that a supply mechanism has to be added in a derived contract using {_mint}. For a generic mechanism see {ERC20PresetMinterPauser}. TIP: For a detailed writeup see our guide https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How to implement supply mechanisms]. We have followed general OpenZeppelin guidelines: functions revert instead of returning `false` on failure. This behavior is nonetheless conventional and does not conflict with the expectations of ERC20 applications. Additionally, an {Approval} event is emitted on calls to {transferFrom}. This allows applications to reconstruct the allowance for all accounts just by listening to said events. Other implementations of the EIP may not emit these events, as it isn't required by the specification. Finally, the non-standard {decreaseAllowance} and {increaseAllowance} functions have been added to mitigate the well-known issues around setting allowances. See {IERC20-approve}.
allowance(address,address) :
See {IERC20-allowance}.
approve(address,uint256) :
See {IERC20-approve}. Requirements: - `spender` cannot be the zero address.
balanceOf(address) :
See {IERC20-balanceOf}.
constructor :
Sets the values for {name} and {symbol}. The default value of {decimals} is 18. To select a different value for {decimals} you should overload it. All two of these values are immutable: they can only be set once during construction.
decimals() :
Returns the number of decimals used to get its user representation. For example, if `decimals` equals `2`, a balance of `505` tokens should be displayed to a user as `5,05` (`505 / 10 ** 2`). Tokens usually opt for a value of 18, imitating the relationship between Ether and Wei. This is the value {ERC20} uses, unless this function is overridden; NOTE: This information is only used for _display_ purposes: it in no way affects any of the arithmetic of the contract, including {IERC20-balanceOf} and {IERC20-transfer}.
decreaseAllowance(address,uint256) :
Atomically decreases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address. - `spender` must have allowance for the caller of at least `subtractedValue`.
increaseAllowance(address,uint256) :
Atomically increases the allowance granted to `spender` by the caller. This is an alternative to {approve} that can be used as a mitigation for problems described in {IERC20-approve}. Emits an {Approval} event indicating the updated allowance. Requirements: - `spender` cannot be the zero address.
name() :
Returns the name of the token.
symbol() :
Returns the symbol of the token, usually a shorter version of the name.
totalSupply() :
See {IERC20-totalSupply}.
transfer(address,uint256) :
See {IERC20-transfer}. Requirements: - `recipient` cannot be the zero address. - the caller must have a balance of at least `amount`.
transferFrom(address,address,uint256) :
See {IERC20-transferFrom}. Emits an {Approval} event indicating the updated allowance. This is not required by the EIP. See the note at the beginning of {ERC20}. Requirements: - `sender` and `recipient` cannot be the zero address. - `sender` must have a balance of at least `amount`. - the caller must have allowance for ``sender``'s tokens of at least `amount`.
SafeMath :
SafeMathInt :
Math operations for int256 with overflow safety checks.
SafeMathUint :
Math operations with safety checks that revert on error
DividendPayingTokenInterface :
An interface for a dividend-paying token contract.
DividendWithdrawn(address,uint256) :
This event MUST emit when an address withdraws their dividend.
DividendsDistributed(address,uint256) :
This event MUST emit when ether is distributed to token holders.
SHOULD transfer `dividendOf(msg.sender)` wei to `msg.sender`, and `dividendOf(msg.sender)` SHOULD be 0 after the transfer. MUST emit a `DividendWithdrawn` event if the amount of ether transferred is greater than 0.
Dividend Paying Token with Buy/Sell Fee
2091