sender

tokenId

owner

ERC721IncorrectOwner

operator

ERC721InsufficientApproval

approver

ERC721InvalidApprover

ERC721InvalidOperator

ERC721InvalidOwner

receiver

ERC721InvalidReceiver

ERC721InvalidSender

ERC721NonexistentToken

InvalidInitialization

NotInitializing

approved

Approval

ApprovalForAll

version

Initialized

from

Transfer

approve

balanceOf

burn

getApproved

isApprovedForAll

name

ownerOf

safeTransferFrom

data

setApprovalForAll

interfaceId

supportsInterface

symbol

tokenURI

transferFrom

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Burnable.sol)

pragma solidity ^0.8.20;

import { ERC721Upgradeable } from "../ERC721Upgradeable.sol";
import { ContextUpgradeable } from "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @title ERC721 Burnable Token
 * @dev ERC721 Token that can be burned (destroyed).
 */
abstract contract ERC721BurnableUpgradeable is Initializable, ContextUpgradeable, ERC721Upgradeable {
    function __ERC721Burnable_init() internal onlyInitializing {
    }

    function __ERC721Burnable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Burns `tokenId`. See {ERC721-_burn}.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) public virtual {
        // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
        _update(address(0), tokenId, _msgSender());
    }
}


This contract extends ERC721Upgradeable and adds the ability to burn tokens. The burn function allows the caller to destroy a specific token, provided they own it or are an approved operator.

ERC721 Burnable Token

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.20;

import { IERC721Upgradeable } from "./IERC721Upgradeable.sol";
import { IERC721ReceiverUpgradeable } from "./IERC721ReceiverUpgradeable.sol";
import { IERC721MetadataUpgradeable } from "./extensions/IERC721MetadataUpgradeable.sol";
import { ContextUpgradeable } from "../../utils/ContextUpgradeable.sol";
import { StringsUpgradeable } from "../../utils/StringsUpgradeable.sol";
import { IERC165Upgradeable, ERC165Upgradeable } from "../../utils/introspection/ERC165Upgradeable.sol";
import { IERC721ErrorsUpgradeable } from "../../interfaces/draft-IERC6093Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
abstract contract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable, IERC721ErrorsUpgradeable {
    using StringsUpgradeable for uint256;

    /// @custom:storage-location erc7201:openzeppelin.storage.ERC721
    struct ERC721Storage {
        // Token name
        string _name;

        // Token symbol
        string _symbol;

        mapping(uint256 tokenId => address) _owners;

        mapping(address owner => uint256) _balances;

        mapping(uint256 tokenId => address) _tokenApprovals;

        mapping(address owner => mapping(address operator => bool)) _operatorApprovals;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC721")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC721StorageLocation = 0x80bb2b638cc20bc4d0a60d66940f3ab4a00c1d7b313497ca82fb0b4ab0079300;

    function _getERC721Storage() private pure returns (ERC721Storage storage $) {
        assembly {
            $.slot := ERC721StorageLocation
        }
    }

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC721_init_unchained(name_, symbol_);
    }

    function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC721Storage storage $ = _getERC721Storage();
        $._name = name_;
        $._symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
        return
            interfaceId == type(IERC721Upgradeable).interfaceId ||
            interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual returns (uint256) {
        ERC721Storage storage $ = _getERC721Storage();
        if (owner == address(0)) {
            revert ERC721InvalidOwner(address(0));
        }
        return $._balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual returns (address) {
        return _requireOwned(tokenId);
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual returns (string memory) {
        ERC721Storage storage $ = _getERC721Storage();
        return $._name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual returns (string memory) {
        ERC721Storage storage $ = _getERC721Storage();
        return $._symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {
        _requireOwned(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual {
        _approve(to, tokenId, _msgSender());
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual returns (address) {
        _requireOwned(tokenId);

        return _getApproved(tokenId);
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {
        ERC721Storage storage $ = _getERC721Storage();
        return $._operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
        address previousOwner = _update(to, tokenId, _msgSender());
        if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {
        transferFrom(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     *
     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the
     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances
     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by
     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        ERC721Storage storage $ = _getERC721Storage();
        return $._owners[tokenId];
    }

    /**
     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.
     */
    function _getApproved(uint256 tokenId) internal view virtual returns (address) {
        ERC721Storage storage $ = _getERC721Storage();
        return $._tokenApprovals[tokenId];
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in
     * particular (ignoring whether it is owned by `owner`).
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {
        return
            spender != address(0) &&
            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);
    }

    /**
     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.
     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets
     * the `spender` for the specific `tokenId`.
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {
        if (!_isAuthorized(owner, spender, tokenId)) {
            if (owner == address(0)) {
                revert ERC721NonexistentToken(tokenId);
            } else {
                revert ERC721InsufficientApproval(spender, tokenId);
            }
        }
    }

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that
     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.
     *
     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the
     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership
     * remain consistent with one another.
     */
    function _increaseBalance(address account, uint128 value) internal virtual {
        ERC721Storage storage $ = _getERC721Storage();
        unchecked {
            $._balances[account] += value;
        }
    }

    /**
     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner
     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that
     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).
     *
     * Emits a {Transfer} event.
     *
     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.
     */
    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {
        ERC721Storage storage $ = _getERC721Storage();
        address from = _ownerOf(tokenId);

        // Perform (optional) operator check
        if (auth != address(0)) {
            _checkAuthorized(from, auth, tokenId);
        }

        // Execute the update
        if (from != address(0)) {
            // Clear approval. No need to re-authorize or emit the Approval event
            _approve(address(0), tokenId, address(0), false);

            unchecked {
                $._balances[from] -= 1;
            }
        }

        if (to != address(0)) {
            unchecked {
                $._balances[to] += 1;
            }
        }

        $._owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        return from;
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner != address(0)) {
            revert ERC721InvalidSender(address(0));
        }
    }

    /**
     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        _checkOnERC721Received(address(0), to, tokenId, data);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal {
        address previousOwner = _update(address(0), tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        } else if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients
     * are aware of the ERC721 standard to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is like {safeTransferFrom} in the sense that it invokes
     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `tokenId` token must exist and be owned by `from`.
     * - `to` cannot be the zero address.
     * - `from` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId) internal {
        _safeTransfer(from, to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is
     * either the owner of the token, or approved to operate on all tokens held by this owner.
     *
     * Emits an {Approval} event.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address to, uint256 tokenId, address auth) internal {
        _approve(to, tokenId, auth, true);
    }

    /**
     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not
     * emitted in the context of transfers.
     */
    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {
        ERC721Storage storage $ = _getERC721Storage();
        // Avoid reading the owner unless necessary
        if (emitEvent || auth != address(0)) {
            address owner = _requireOwned(tokenId);

            // We do not use _isAuthorized because single-token approvals should not be able to call approve
            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {
                revert ERC721InvalidApprover(auth);
            }

            if (emitEvent) {
                emit Approval(owner, to, tokenId);
            }
        }

        $._tokenApprovals[tokenId] = to;
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Requirements:
     * - operator can't be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        ERC721Storage storage $ = _getERC721Storage();
        if (operator == address(0)) {
            revert ERC721InvalidOperator(operator);
        }
        $._operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).
     * Returns the owner.
     *
     * Overrides to ownership logic should be done to {_ownerOf}.
     */
    function _requireOwned(uint256 tokenId) internal view returns (address) {
        address owner = _ownerOf(tokenId);
        if (owner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
        return owner;
    }

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the
     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {
        if (to.code.length > 0) {
            try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                if (retval != IERC721ReceiverUpgradeable.onERC721Received.selector) {
                    revert ERC721InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert ERC721InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }
}


This contract is an implementation of the ERC721 token standard for non-fungible tokens (NFTs). It allows users to create, own, transfer, and manage unique tokens. It provides functions for minting, burning, transferring, and querying token ownership and metadata. The contract also supports token approvals and operator approvals for managing tokens on behalf of other users.

balance

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../../utils/introspection/IERC165Upgradeable.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721Upgradeable is IERC165Upgradeable {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
     *   {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


onERC721Received

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721ReceiverUpgradeable {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}


ERC721 token receiver interface

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import { IERC721Upgradeable } from "../IERC721Upgradeable.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721MetadataUpgradeable is IERC721Upgradeable {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}


ERC-721 Non-Fungible Token Standard, optional metadata extension

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721.sol)

pragma solidity ^0.8.20;

import { IERC721Upgradeable } from "../token/ERC721/IERC721Upgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.20;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}


This contract provides functionality for initializing and reinitializing contracts, with modifiers to protect initialization functions and prevent reinitialization. It also includes a function to lock the contract and prevent future reinitialization.

value

length

StringsInsufficientHexLength

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import { MathUpgradeable } from "./math/MathUpgradeable.sol";
import { SignedMathUpgradeable } from "./math/SignedMathUpgradeable.sol";

/**
 * @dev String operations.
 */
library StringsUpgradeable {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = MathUpgradeable.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMathUpgradeable.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, MathUpgradeable.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library MathUpgradeable {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMathUpgradeable {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal onlyInitializing {
    }

    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20ErrorsUpgradeable {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721ErrorsUpgradeable {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155ErrorsUpgradeable {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import { IAccessControlUpgradeable } from "./IAccessControlUpgradeable.sol";
import { ContextUpgradeable } from "../utils/ContextUpgradeable.sol";
import { ERC165Upgradeable } from "../utils/introspection/ERC165Upgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;


    /// @custom:storage-location erc7201:openzeppelin.storage.AccessControl
    struct AccessControlStorage {
        mapping(bytes32 role => RoleData) _roles;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.AccessControl")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant AccessControlStorageLocation = 0x02dd7bc7dec4dceedda775e58dd541e08a116c6c53815c0bd028192f7b626800;

    function _getAccessControlStorage() private pure returns (AccessControlStorage storage $) {
        assembly {
            $.slot := AccessControlStorageLocation
        }
    }

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    function __AccessControl_init() internal onlyInitializing {
    }

    function __AccessControl_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        AccessControlStorage storage $ = _getAccessControlStorage();
        bytes32 previousAdminRole = getRoleAdmin(role);
        $._roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (!hasRole(role, account)) {
            $._roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (hasRole(role, account)) {
            $._roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControlUpgradeable {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;

import { OwnableUpgradeable } from "./OwnableUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable2Step
    struct Ownable2StepStorage {
        address _pendingOwner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable2Step")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant Ownable2StepStorageLocation = 0x237e158222e3e6968b72b9db0d8043aacf074ad9f650f0d1606b4d82ee432c00;

    function _getOwnable2StepStorage() private pure returns (Ownable2StepStorage storage $) {
        assembly {
            $.slot := Ownable2StepStorageLocation
        }
    }

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    function __Ownable2Step_init() internal onlyInitializing {
    }

    function __Ownable2Step_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        return $._pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        $._pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        delete $._pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import { ContextUpgradeable } from "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.20;

import { IAccessControlDefaultAdminRulesUpgradeable } from "./IAccessControlDefaultAdminRulesUpgradeable.sol";
import { AccessControlUpgradeable, IAccessControlUpgradeable } from "../AccessControlUpgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import { MathUpgradeable } from "../../utils/math/MathUpgradeable.sol";
import { IERC5313Upgradeable } from "../../interfaces/IERC5313Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {AccessControl} that allows specifying special rules to manage
 * the `DEFAULT_ADMIN_ROLE` holder, which is a sensitive role with special permissions
 * over other roles that may potentially have privileged rights in the system.
 *
 * If a specific role doesn't have an admin role assigned, the holder of the
 * `DEFAULT_ADMIN_ROLE` will have the ability to grant it and revoke it.
 *
 * This contract implements the following risk mitigations on top of {AccessControl}:
 *
 * * Only one account holds the `DEFAULT_ADMIN_ROLE` since deployment until it's potentially renounced.
 * * Enforces a 2-step process to transfer the `DEFAULT_ADMIN_ROLE` to another account.
 * * Enforces a configurable delay between the two steps, with the ability to cancel before the transfer is accepted.
 * * The delay can be changed by scheduling, see {changeDefaultAdminDelay}.
 * * It is not possible to use another role to manage the `DEFAULT_ADMIN_ROLE`.
 *
 * Example usage:
 *
 * ```solidity
 * contract MyToken is AccessControlDefaultAdminRules {
 *   constructor() AccessControlDefaultAdminRules(
 *     3 days,
 *     msg.sender // Explicit initial `DEFAULT_ADMIN_ROLE` holder
 *    ) {}
 * }
 * ```
 */
abstract contract AccessControlDefaultAdminRulesUpgradeable is Initializable, IAccessControlDefaultAdminRulesUpgradeable, IERC5313Upgradeable, AccessControlUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.AccessControlDefaultAdminRules
    struct AccessControlDefaultAdminRulesStorage {
        // pending admin pair read/written together frequently
        address _pendingDefaultAdmin;
        uint48 _pendingDefaultAdminSchedule; // 0 == unset

        uint48 _currentDelay;
        address _currentDefaultAdmin;

        // pending delay pair read/written together frequently
        uint48 _pendingDelay;
        uint48 _pendingDelaySchedule; // 0 == unset
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.AccessControlDefaultAdminRules")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant AccessControlDefaultAdminRulesStorageLocation = 0xeef3dac4538c82c8ace4063ab0acd2d15cdb5883aa1dff7c2673abb3d8698400;

    function _getAccessControlDefaultAdminRulesStorage() private pure returns (AccessControlDefaultAdminRulesStorage storage $) {
        assembly {
            $.slot := AccessControlDefaultAdminRulesStorageLocation
        }
    }

    /**
     * @dev Sets the initial values for {defaultAdminDelay} and {defaultAdmin} address.
     */
    function __AccessControlDefaultAdminRules_init(uint48 initialDelay, address initialDefaultAdmin) internal onlyInitializing {
        __AccessControlDefaultAdminRules_init_unchained(initialDelay, initialDefaultAdmin);
    }

    function __AccessControlDefaultAdminRules_init_unchained(uint48 initialDelay, address initialDefaultAdmin) internal onlyInitializing {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        if (initialDefaultAdmin == address(0)) {
            revert AccessControlInvalidDefaultAdmin(address(0));
        }
        $._currentDelay = initialDelay;
        _grantRole(DEFAULT_ADMIN_ROLE, initialDefaultAdmin);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlDefaultAdminRulesUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC5313-owner}.
     */
    function owner() public view virtual returns (address) {
        return defaultAdmin();
    }

    ///
    /// Override AccessControl role management
    ///

    /**
     * @dev See {AccessControl-grantRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function grantRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super.grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-revokeRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function revokeRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super.revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-renounceRole}.
     *
     * For the `DEFAULT_ADMIN_ROLE`, it only allows renouncing in two steps by first calling
     * {beginDefaultAdminTransfer} to the `address(0)`, so it's required that the {pendingDefaultAdmin} schedule
     * has also passed when calling this function.
     *
     * After its execution, it will not be possible to call `onlyRole(DEFAULT_ADMIN_ROLE)` functions.
     *
     * NOTE: Renouncing `DEFAULT_ADMIN_ROLE` will leave the contract without a {defaultAdmin},
     * thereby disabling any functionality that is only available for it, and the possibility of reassigning a
     * non-administrated role.
     */
    function renounceRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            (address newDefaultAdmin, uint48 schedule) = pendingDefaultAdmin();
            if (newDefaultAdmin != address(0) || !_isScheduleSet(schedule) || !_hasSchedulePassed(schedule)) {
                revert AccessControlEnforcedDefaultAdminDelay(schedule);
            }
            delete $._pendingDefaultAdminSchedule;
        }
        super.renounceRole(role, account);
    }

    /**
     * @dev See {AccessControl-_grantRole}.
     *
     * For `DEFAULT_ADMIN_ROLE`, it only allows granting if there isn't already a {defaultAdmin} or if the
     * role has been previously renounced.
     *
     * NOTE: Exposing this function through another mechanism may make the `DEFAULT_ADMIN_ROLE`
     * assignable again. Make sure to guarantee this is the expected behavior in your implementation.
     */
    function _grantRole(bytes32 role, address account) internal virtual override returns (bool) {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        if (role == DEFAULT_ADMIN_ROLE) {
            if (defaultAdmin() != address(0)) {
                revert AccessControlEnforcedDefaultAdminRules();
            }
            $._currentDefaultAdmin = account;
        }
        return super._grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-_revokeRole}.
     */
    function _revokeRole(bytes32 role, address account) internal virtual override returns (bool) {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            delete $._currentDefaultAdmin;
        }
        return super._revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-_setRoleAdmin}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual override {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super._setRoleAdmin(role, adminRole);
    }

    ///
    /// AccessControlDefaultAdminRules accessors
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function defaultAdmin() public view virtual returns (address) {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        return $._currentDefaultAdmin;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function pendingDefaultAdmin() public view virtual returns (address newAdmin, uint48 schedule) {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        return ($._pendingDefaultAdmin, $._pendingDefaultAdminSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function defaultAdminDelay() public view virtual returns (uint48) {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        uint48 schedule = $._pendingDelaySchedule;
        return (_isScheduleSet(schedule) && _hasSchedulePassed(schedule)) ? $._pendingDelay : $._currentDelay;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function pendingDefaultAdminDelay() public view virtual returns (uint48 newDelay, uint48 schedule) {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        schedule = $._pendingDelaySchedule;
        return (_isScheduleSet(schedule) && !_hasSchedulePassed(schedule)) ? ($._pendingDelay, schedule) : (0, 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function defaultAdminDelayIncreaseWait() public view virtual returns (uint48) {
        return 5 days;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdmin/pendingDefaultAdmin
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function beginDefaultAdminTransfer(address newAdmin) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _beginDefaultAdminTransfer(newAdmin);
    }

    /**
     * @dev See {beginDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _beginDefaultAdminTransfer(address newAdmin) internal virtual {
        uint48 newSchedule = SafeCastUpgradeable.toUint48(block.timestamp) + defaultAdminDelay();
        _setPendingDefaultAdmin(newAdmin, newSchedule);
        emit DefaultAdminTransferScheduled(newAdmin, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function cancelDefaultAdminTransfer() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _cancelDefaultAdminTransfer();
    }

    /**
     * @dev See {cancelDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _cancelDefaultAdminTransfer() internal virtual {
        _setPendingDefaultAdmin(address(0), 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function acceptDefaultAdminTransfer() public virtual {
        (address newDefaultAdmin, ) = pendingDefaultAdmin();
        if (_msgSender() != newDefaultAdmin) {
            // Enforce newDefaultAdmin explicit acceptance.
            revert AccessControlInvalidDefaultAdmin(_msgSender());
        }
        _acceptDefaultAdminTransfer();
    }

    /**
     * @dev See {acceptDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _acceptDefaultAdminTransfer() internal virtual {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        (address newAdmin, uint48 schedule) = pendingDefaultAdmin();
        if (!_isScheduleSet(schedule) || !_hasSchedulePassed(schedule)) {
            revert AccessControlEnforcedDefaultAdminDelay(schedule);
        }
        _revokeRole(DEFAULT_ADMIN_ROLE, defaultAdmin());
        _grantRole(DEFAULT_ADMIN_ROLE, newAdmin);
        delete $._pendingDefaultAdmin;
        delete $._pendingDefaultAdminSchedule;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdminDelay/pendingDefaultAdminDelay
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function changeDefaultAdminDelay(uint48 newDelay) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _changeDefaultAdminDelay(newDelay);
    }

    /**
     * @dev See {changeDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _changeDefaultAdminDelay(uint48 newDelay) internal virtual {
        uint48 newSchedule = SafeCastUpgradeable.toUint48(block.timestamp) + _delayChangeWait(newDelay);
        _setPendingDelay(newDelay, newSchedule);
        emit DefaultAdminDelayChangeScheduled(newDelay, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable
     */
    function rollbackDefaultAdminDelay() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _rollbackDefaultAdminDelay();
    }

    /**
     * @dev See {rollbackDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _rollbackDefaultAdminDelay() internal virtual {
        _setPendingDelay(0, 0);
    }

    /**
     * @dev Returns the amount of seconds to wait after the `newDelay` will
     * become the new {defaultAdminDelay}.
     *
     * The value returned guarantees that if the delay is reduced, it will go into effect
     * after a wait that honors the previously set delay.
     *
     * See {defaultAdminDelayIncreaseWait}.
     */
    function _delayChangeWait(uint48 newDelay) internal view virtual returns (uint48) {
        uint48 currentDelay = defaultAdminDelay();

        // When increasing the delay, we schedule the delay change to occur after a period of "new delay" has passed, up
        // to a maximum given by defaultAdminDelayIncreaseWait, by default 5 days. For example, if increasing from 1 day
        // to 3 days, the new delay will come into effect after 3 days. If increasing from 1 day to 10 days, the new
        // delay will come into effect after 5 days. The 5 day wait period is intended to be able to fix an error like
        // using milliseconds instead of seconds.
        //
        // When decreasing the delay, we wait the difference between "current delay" and "new delay". This guarantees
        // that an admin transfer cannot be made faster than "current delay" at the time the delay change is scheduled.
        // For example, if decreasing from 10 days to 3 days, the new delay will come into effect after 7 days.
        return
            newDelay > currentDelay
                ? uint48(MathUpgradeable.min(newDelay, defaultAdminDelayIncreaseWait())) // no need to safecast, both inputs are uint48
                : currentDelay - newDelay;
    }

    ///
    /// Private setters
    ///

    /**
     * @dev Setter of the tuple for pending admin and its schedule.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function _setPendingDefaultAdmin(address newAdmin, uint48 newSchedule) private {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        (, uint48 oldSchedule) = pendingDefaultAdmin();

        $._pendingDefaultAdmin = newAdmin;
        $._pendingDefaultAdminSchedule = newSchedule;

        // An `oldSchedule` from `pendingDefaultAdmin()` is only set if it hasn't been accepted.
        if (_isScheduleSet(oldSchedule)) {
            // Emit for implicit cancellations when another default admin was scheduled.
            emit DefaultAdminTransferCanceled();
        }
    }

    /**
     * @dev Setter of the tuple for pending delay and its schedule.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function _setPendingDelay(uint48 newDelay, uint48 newSchedule) private {
        AccessControlDefaultAdminRulesStorage storage $ = _getAccessControlDefaultAdminRulesStorage();
        uint48 oldSchedule = $._pendingDelaySchedule;

        if (_isScheduleSet(oldSchedule)) {
            if (_hasSchedulePassed(oldSchedule)) {
                // Materialize a virtual delay
                $._currentDelay = $._pendingDelay;
            } else {
                // Emit for implicit cancellations when another delay was scheduled.
                emit DefaultAdminDelayChangeCanceled();
            }
        }

        $._pendingDelay = newDelay;
        $._pendingDelaySchedule = newSchedule;
    }

    ///
    /// Private helpers
    ///

    /**
     * @dev Defines if an `schedule` is considered set. For consistency purposes.
     */
    function _isScheduleSet(uint48 schedule) private pure returns (bool) {
        return schedule != 0;
    }

    /**
     * @dev Defines if an `schedule` is considered passed. For consistency purposes.
     */
    function _hasSchedulePassed(uint48 schedule) private view returns (bool) {
        return schedule < block.timestamp;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.20;

import { IAccessControlEnumerableUpgradeable } from "./IAccessControlEnumerableUpgradeable.sol";
import { AccessControlUpgradeable } from "../AccessControlUpgradeable.sol";
import { EnumerableSetUpgradeable } from "../../utils/structs/EnumerableSetUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerableUpgradeable is Initializable, IAccessControlEnumerableUpgradeable, AccessControlUpgradeable {
    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;

    /// @custom:storage-location erc7201:openzeppelin.storage.AccessControlEnumerable
    struct AccessControlEnumerableStorage {
        mapping(bytes32 role => EnumerableSetUpgradeable.AddressSet) _roleMembers;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.AccessControlEnumerable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant AccessControlEnumerableStorageLocation = 0xc1f6fe24621ce81ec5827caf0253cadb74709b061630e6b55e82371705932000;

    function _getAccessControlEnumerableStorage() private pure returns (AccessControlEnumerableStorage storage $) {
        assembly {
            $.slot := AccessControlEnumerableStorageLocation
        }
    }

    function __AccessControlEnumerable_init() internal onlyInitializing {
    }

    function __AccessControlEnumerable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual returns (address) {
        AccessControlEnumerableStorage storage $ = _getAccessControlEnumerableStorage();
        return $._roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual returns (uint256) {
        AccessControlEnumerableStorage storage $ = _getAccessControlEnumerableStorage();
        return $._roleMembers[role].length();
    }

    /**
     * @dev Overload {AccessControl-_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override returns (bool) {
        AccessControlEnumerableStorage storage $ = _getAccessControlEnumerableStorage();
        bool granted = super._grantRole(role, account);
        if (granted) {
            $._roleMembers[role].add(account);
        }
        return granted;
    }

    /**
     * @dev Overload {AccessControl-_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override returns (bool) {
        AccessControlEnumerableStorage storage $ = _getAccessControlEnumerableStorage();
        bool revoked = super._revokeRole(role, account);
        if (revoked) {
            $._roleMembers[role].remove(account);
        }
        return revoked;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/IAccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.20;

import { IAccessControlUpgradeable } from "../IAccessControlUpgradeable.sol";

/**
 * @dev External interface of AccessControlDefaultAdminRules declared to support ERC165 detection.
 */
interface IAccessControlDefaultAdminRulesUpgradeable is IAccessControlUpgradeable {
    /**
     * @dev The new default admin is not a valid default admin.
     */
    error AccessControlInvalidDefaultAdmin(address defaultAdmin);

    /**
     * @dev At least one of the following rules was violated:
     *
     * - The `DEFAULT_ADMIN_ROLE` must only be managed by itself.
     * - The `DEFAULT_ADMIN_ROLE` must only be held by one account at the time.
     * - Any `DEFAULT_ADMIN_ROLE` transfer must be in two delayed steps.
     */
    error AccessControlEnforcedDefaultAdminRules();

    /**
     * @dev The delay for transferring the default admin delay is enforced and
     * the operation must wait until `schedule`.
     *
     * NOTE: `schedule` can be 0 indicating there's no transfer scheduled.
     */
    error AccessControlEnforcedDefaultAdminDelay(uint48 schedule);

    /**
     * @dev Emitted when a {defaultAdmin} transfer is started, setting `newAdmin` as the next
     * address to become the {defaultAdmin} by calling {acceptDefaultAdminTransfer} only after `acceptSchedule`
     * passes.
     */
    event DefaultAdminTransferScheduled(address indexed newAdmin, uint48 acceptSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdmin} is reset if it was never accepted, regardless of its schedule.
     */
    event DefaultAdminTransferCanceled();

    /**
     * @dev Emitted when a {defaultAdminDelay} change is started, setting `newDelay` as the next
     * delay to be applied between default admin transfer after `effectSchedule` has passed.
     */
    event DefaultAdminDelayChangeScheduled(uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdminDelay} is reset if its schedule didn't pass.
     */
    event DefaultAdminDelayChangeCanceled();

    /**
     * @dev Returns the address of the current `DEFAULT_ADMIN_ROLE` holder.
     */
    function defaultAdmin() external view returns (address);

    /**
     * @dev Returns a tuple of a `newAdmin` and an accept schedule.
     *
     * After the `schedule` passes, the `newAdmin` will be able to accept the {defaultAdmin} role
     * by calling {acceptDefaultAdminTransfer}, completing the role transfer.
     *
     * A zero value only in `acceptSchedule` indicates no pending admin transfer.
     *
     * NOTE: A zero address `newAdmin` means that {defaultAdmin} is being renounced.
     */
    function pendingDefaultAdmin() external view returns (address newAdmin, uint48 acceptSchedule);

    /**
     * @dev Returns the delay required to schedule the acceptance of a {defaultAdmin} transfer started.
     *
     * This delay will be added to the current timestamp when calling {beginDefaultAdminTransfer} to set
     * the acceptance schedule.
     *
     * NOTE: If a delay change has been scheduled, it will take effect as soon as the schedule passes, making this
     * function returns the new delay. See {changeDefaultAdminDelay}.
     */
    function defaultAdminDelay() external view returns (uint48);

    /**
     * @dev Returns a tuple of `newDelay` and an effect schedule.
     *
     * After the `schedule` passes, the `newDelay` will get into effect immediately for every
     * new {defaultAdmin} transfer started with {beginDefaultAdminTransfer}.
     *
     * A zero value only in `effectSchedule` indicates no pending delay change.
     *
     * NOTE: A zero value only for `newDelay` means that the next {defaultAdminDelay}
     * will be zero after the effect schedule.
     */
    function pendingDefaultAdminDelay() external view returns (uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Starts a {defaultAdmin} transfer by setting a {pendingDefaultAdmin} scheduled for acceptance
     * after the current timestamp plus a {defaultAdminDelay}.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminRoleChangeStarted event.
     */
    function beginDefaultAdminTransfer(address newAdmin) external;

    /**
     * @dev Cancels a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * A {pendingDefaultAdmin} not yet accepted can also be cancelled with this function.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function cancelDefaultAdminTransfer() external;

    /**
     * @dev Completes a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * After calling the function:
     *
     * - `DEFAULT_ADMIN_ROLE` should be granted to the caller.
     * - `DEFAULT_ADMIN_ROLE` should be revoked from the previous holder.
     * - {pendingDefaultAdmin} should be reset to zero values.
     *
     * Requirements:
     *
     * - Only can be called by the {pendingDefaultAdmin}'s `newAdmin`.
     * - The {pendingDefaultAdmin}'s `acceptSchedule` should've passed.
     */
    function acceptDefaultAdminTransfer() external;

    /**
     * @dev Initiates a {defaultAdminDelay} update by setting a {pendingDefaultAdminDelay} scheduled for getting
     * into effect after the current timestamp plus a {defaultAdminDelay}.
     *
     * This function guarantees that any call to {beginDefaultAdminTransfer} done between the timestamp this
     * method is called and the {pendingDefaultAdminDelay} effect schedule will use the current {defaultAdminDelay}
     * set before calling.
     *
     * The {pendingDefaultAdminDelay}'s effect schedule is defined in a way that waiting until the schedule and then
     * calling {beginDefaultAdminTransfer} with the new delay will take at least the same as another {defaultAdmin}
     * complete transfer (including acceptance).
     *
     * The schedule is designed for two scenarios:
     *
     * - When the delay is changed for a larger one the schedule is `block.timestamp + newDelay` capped by
     * {defaultAdminDelayIncreaseWait}.
     * - When the delay is changed for a shorter one, the schedule is `block.timestamp + (current delay - new delay)`.
     *
     * A {pendingDefaultAdminDelay} that never got into effect will be canceled in favor of a new scheduled change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminDelayChangeScheduled event and may emit a DefaultAdminDelayChangeCanceled event.
     */
    function changeDefaultAdminDelay(uint48 newDelay) external;

    /**
     * @dev Cancels a scheduled {defaultAdminDelay} change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function rollbackDefaultAdminDelay() external;

    /**
     * @dev Maximum time in seconds for an increase to {defaultAdminDelay} (that is scheduled using {changeDefaultAdminDelay})
     * to take effect. Default to 5 days.
     *
     * When the {defaultAdminDelay} is scheduled to be increased, it goes into effect after the new delay has passed with
     * the purpose of giving enough time for reverting any accidental change (i.e. using milliseconds instead of seconds)
     * that may lock the contract. However, to avoid excessive schedules, the wait is capped by this function and it can
     * be overrode for a custom {defaultAdminDelay} increase scheduling.
     *
     * IMPORTANT: Make sure to add a reasonable amount of time while overriding this value, otherwise,
     * there's a risk of setting a high new delay that goes into effect almost immediately without the
     * possibility of human intervention in the case of an input error (eg. set milliseconds instead of seconds).
     */
    function defaultAdminDelayIncreaseWait() external view returns (uint48);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.20;

import { IAccessControlUpgradeable } from "../IAccessControlUpgradeable.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerableUpgradeable is IAccessControlUpgradeable {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IAuthorityUpgradeable } from "./IAuthorityUpgradeable.sol";
import { AuthorityUtilsUpgradeable } from "./AuthorityUtilsUpgradeable.sol";
import { IAccessManagerUpgradeable } from "./IAccessManagerUpgradeable.sol";
import { IAccessManagedUpgradeable } from "./IAccessManagedUpgradeable.sol";
import { ContextUpgradeable } from "../../utils/ContextUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev This contract module makes available a {restricted} modifier. Functions decorated with this modifier will be
 * permissioned according to an "authority": a contract like {AccessManager} that follows the {IAuthority} interface,
 * implementing a policy that allows certain callers to access certain functions.
 *
 * IMPORTANT: The `restricted` modifier should never be used on `internal` functions, judiciously used in `public`
 * functions, and ideally only used in `external` functions. See {restricted}.
 */
abstract contract AccessManagedUpgradeable is Initializable, ContextUpgradeable, IAccessManagedUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.AccessManaged
    struct AccessManagedStorage {
        address _authority;

        bool _consumingSchedule;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.AccessManaged")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant AccessManagedStorageLocation = 0xf3177357ab46d8af007ab3fdb9af81da189e1068fefdc0073dca88a2cab40a00;

    function _getAccessManagedStorage() private pure returns (AccessManagedStorage storage $) {
        assembly {
            $.slot := AccessManagedStorageLocation
        }
    }

    /**
     * @dev Initializes the contract connected to an initial authority.
     */
    function __AccessManaged_init(address initialAuthority) internal onlyInitializing {
        __AccessManaged_init_unchained(initialAuthority);
    }

    function __AccessManaged_init_unchained(address initialAuthority) internal onlyInitializing {
        _setAuthority(initialAuthority);
    }

    /**
     * @dev Restricts access to a function as defined by the connected Authority for this contract and the
     * caller and selector of the function that entered the contract.
     *
     * [IMPORTANT]
     * ====
     * In general, this modifier should only be used on `external` functions. It is okay to use it on `public`
     * functions that are used as external entry points and are not called internally. Unless you know what you're
     * doing, it should never be used on `internal` functions. Failure to follow these rules can have critical security
     * implications! This is because the permissions are determined by the function that entered the contract, i.e. the
     * function at the bottom of the call stack, and not the function where the modifier is visible in the source code.
     * ====
     *
     * [NOTE]
     * ====
     * Selector collisions are mitigated by scoping permissions per contract, but some edge cases must be considered:
     *
     * * If the https://docs.soliditylang.org/en/v0.8.20/contracts.html#receive-ether-function[`receive()`] function
     * is restricted, any other function with a `0x00000000` selector will share permissions with `receive()`.
     * * Similarly, if there's no `receive()` function but a `fallback()` instead, the fallback might be called with
     * empty `calldata`, sharing the `0x00000000` selector permissions as well.
     * * For any other selector, if the restricted function is set on an upgradeable contract, an upgrade may remove
     * the restricted function and replace it with a new method whose selector replaces the last one, keeping the
     * previous permissions.
     * ====
     */
    modifier restricted() {
        _checkCanCall(_msgSender(), _msgData());
        _;
    }

    /**
     * @dev Returns the current authority.
     */
    function authority() public view virtual returns (address) {
        AccessManagedStorage storage $ = _getAccessManagedStorage();
        return $._authority;
    }

    /**
     * @dev Transfers control to a new authority. The caller must be the current authority.
     */
    function setAuthority(address newAuthority) public virtual {
        address caller = _msgSender();
        if (caller != authority()) {
            revert AccessManagedUnauthorized(caller);
        }
        if (newAuthority.code.length == 0) {
            revert AccessManagedInvalidAuthority(newAuthority);
        }
        _setAuthority(newAuthority);
    }

    /**
     * @dev Returns true only in the context of a delayed restricted call, at the moment that the scheduled operation is
     * being consumed. Prevents denial of service for delayed restricted calls in the case that the contract performs
     * attacker controlled calls.
     */
    function isConsumingScheduledOp() public view returns (bytes4) {
        AccessManagedStorage storage $ = _getAccessManagedStorage();
        return $._consumingSchedule ? this.isConsumingScheduledOp.selector : bytes4(0);
    }

    /**
     * @dev Transfers control to a new authority. Internal function with no access restriction. Allows bypassing the
     * permissions set by the current authority.
     */
    function _setAuthority(address newAuthority) internal virtual {
        AccessManagedStorage storage $ = _getAccessManagedStorage();
        $._authority = newAuthority;
        emit AuthorityUpdated(newAuthority);
    }

    /**
     * @dev Reverts if the caller is not allowed to call the function identified by a selector.
     */
    function _checkCanCall(address caller, bytes calldata data) internal virtual {
        AccessManagedStorage storage $ = _getAccessManagedStorage();
        (bool immediate, uint32 delay) = AuthorityUtilsUpgradeable.canCallWithDelay(
            authority(),
            caller,
            address(this),
            bytes4(data)
        );
        if (!immediate) {
            if (delay > 0) {
                $._consumingSchedule = true;
                IAccessManagerUpgradeable(authority()).consumeScheduledOp(caller, data);
                $._consumingSchedule = false;
            } else {
                revert AccessManagedUnauthorized(caller);
            }
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IAuthorityUpgradeable } from "./IAuthorityUpgradeable.sol";

library AuthorityUtilsUpgradeable {
    /**
     * @dev Since `AccessManager` implements an extended IAuthority interface, invoking `canCall` with backwards compatibility
     * for the preexisting `IAuthority` interface requires special care to avoid reverting on insufficient return data.
     * This helper function takes care of invoking `canCall` in a backwards compatible way without reverting.
     */
    function canCallWithDelay(
        address authority,
        address caller,
        address target,
        bytes4 selector
    ) internal view returns (bool immediate, uint32 delay) {
        (bool success, bytes memory data) = authority.staticcall(
            abi.encodeCall(IAuthorityUpgradeable.canCall, (caller, target, selector))
        );
        if (success) {
            if (data.length >= 0x40) {
                (immediate, delay) = abi.decode(data, (bool, uint32));
            } else if (data.length >= 0x20) {
                immediate = abi.decode(data, (bool));
            }
        }
        return (immediate, delay);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

interface IAccessManagedUpgradeable {
    event AuthorityUpdated(address authority);

    error AccessManagedUnauthorized(address caller);
    error AccessManagedRequiredDelay(address caller, uint32 delay);
    error AccessManagedInvalidAuthority(address authority);

    function authority() external view returns (address);

    function setAuthority(address) external;

    function isConsumingScheduledOp() external view returns (bytes4);
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IAccessManagedUpgradeable } from "./IAccessManagedUpgradeable.sol";
import { TimeUpgradeable } from "../../utils/types/TimeUpgradeable.sol";

interface IAccessManagerUpgradeable {
    /**
     * @dev A delayed operation was scheduled.
     */
    event OperationScheduled(
        bytes32 indexed operationId,
        uint32 indexed nonce,
        uint48 schedule,
        address caller,
        address target,
        bytes data
    );

    /**
     * @dev A scheduled operation was executed.
     */
    event OperationExecuted(bytes32 indexed operationId, uint32 indexed nonce);

    /**
     * @dev A scheduled operation was canceled.
     */
    event OperationCanceled(bytes32 indexed operationId, uint32 indexed nonce);

    event RoleLabel(uint64 indexed roleId, string label);
    event RoleGranted(uint64 indexed roleId, address indexed account, uint32 delay, uint48 since, bool newMember);
    event RoleRevoked(uint64 indexed roleId, address indexed account);
    event RoleAdminChanged(uint64 indexed roleId, uint64 indexed admin);
    event RoleGuardianChanged(uint64 indexed roleId, uint64 indexed guardian);
    event RoleGrantDelayChanged(uint64 indexed roleId, uint32 delay, uint48 since);
    event TargetClosed(address indexed target, bool closed);
    event TargetFunctionRoleUpdated(address indexed target, bytes4 selector, uint64 indexed roleId);
    event TargetAdminDelayUpdated(address indexed target, uint32 delay, uint48 since);

    error AccessManagerAlreadyScheduled(bytes32 operationId);
    error AccessManagerNotScheduled(bytes32 operationId);
    error AccessManagerNotReady(bytes32 operationId);
    error AccessManagerExpired(bytes32 operationId);
    error AccessManagerLockedAccount(address account);
    error AccessManagerLockedRole(uint64 roleId);
    error AccessManagerBadConfirmation();
    error AccessManagerUnauthorizedAccount(address msgsender, uint64 roleId);
    error AccessManagerUnauthorizedCall(address caller, address target, bytes4 selector);
    error AccessManagerUnauthorizedConsume(address target);
    error AccessManagerUnauthorizedCancel(address msgsender, address caller, address target, bytes4 selector);
    error AccessManagerInvalidInitialAdmin(address initialAdmin);

    function canCall(
        address caller,
        address target,
        bytes4 selector
    ) external view returns (bool allowed, uint32 delay);

    function hashOperation(address caller, address target, bytes calldata data) external view returns (bytes32);

    function expiration() external view returns (uint32);

    function isTargetClosed(address target) external view returns (bool);

    function getTargetFunctionRole(address target, bytes4 selector) external view returns (uint64);

    function getTargetAdminDelay(address target) external view returns (uint32);

    function getRoleAdmin(uint64 roleId) external view returns (uint64);

    function getRoleGuardian(uint64 roleId) external view returns (uint64);

    function getRoleGrantDelay(uint64 roleId) external view returns (uint32);

    function getAccess(uint64 roleId, address account) external view returns (uint48, uint32, uint32, uint48);

    function hasRole(uint64 roleId, address account) external view returns (bool, uint32);

    function labelRole(uint64 roleId, string calldata label) external;

    function grantRole(uint64 roleId, address account, uint32 executionDelay) external;

    function revokeRole(uint64 roleId, address account) external;

    function renounceRole(uint64 roleId, address callerConfirmation) external;

    function setRoleAdmin(uint64 roleId, uint64 admin) external;

    function setRoleGuardian(uint64 roleId, uint64 guardian) external;

    function setGrantDelay(uint64 roleId, uint32 newDelay) external;

    function setTargetFunctionRole(address target, bytes4[] calldata selectors, uint64 roleId) external;

    function setTargetAdminDelay(address target, uint32 newDelay) external;

    function setTargetClosed(address target, bool closed) external;

    function getSchedule(bytes32 id) external view returns (uint48);

    function getNonce(bytes32 id) external view returns (uint32);

    function schedule(address target, bytes calldata data, uint48 when) external returns (bytes32, uint32);

    function execute(address target, bytes calldata data) external payable returns (uint32);

    function cancel(address caller, address target, bytes calldata data) external returns (uint32);

    function consumeScheduledOp(address caller, bytes calldata data) external;

    function updateAuthority(address target, address newAuthority) external;
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @dev Standard interface for permissioning originally defined in Dappsys.
 */
interface IAuthorityUpgradeable {
    /**
     * @dev Returns true if the caller can invoke on a target the function identified by a function selector.
     */
    function canCall(address caller, address target, bytes4 selector) external view returns (bool allowed);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (finance/VestingWallet.sol)
pragma solidity ^0.8.20;

import { IERC20Upgradeable } from "../token/ERC20/IERC20Upgradeable.sol";
import { SafeERC20Upgradeable } from "../token/ERC20/utils/SafeERC20Upgradeable.sol";
import { AddressUpgradeable } from "../utils/AddressUpgradeable.sol";
import { ContextUpgradeable } from "../utils/ContextUpgradeable.sol";
import { OwnableUpgradeable } from "../access/OwnableUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev A vesting wallet is an ownable contract that can receive native currency and ERC20 tokens, and release these
 * assets to the wallet owner, also referred to as "beneficiary", according to a vesting schedule.
 *
 * Any assets transferred to this contract will follow the vesting schedule as if they were locked from the beginning.
 * Consequently, if the vesting has already started, any amount of tokens sent to this contract will (at least partly)
 * be immediately releasable.
 *
 * By setting the duration to 0, one can configure this contract to behave like an asset timelock that hold tokens for
 * a beneficiary until a specified time.
 *
 * NOTE: Since the wallet is {Ownable}, and ownership can be transferred, it is possible to sell unvested tokens.
 * Preventing this in a smart contract is difficult, considering that: 1) a beneficiary address could be a
 * counterfactually deployed contract, 2) there is likely to be a migration path for EOAs to become contracts in the
 * near future.
 *
 * NOTE: When using this contract with any token whose balance is adjusted automatically (i.e. a rebase token), make
 * sure to account the supply/balance adjustment in the vesting schedule to ensure the vested amount is as intended.
 */
contract VestingWalletUpgradeable is Initializable, ContextUpgradeable, OwnableUpgradeable {
    event EtherReleased(uint256 amount);
    event ERC20Released(address indexed token, uint256 amount);

    /// @custom:storage-location erc7201:openzeppelin.storage.VestingWallet
    struct VestingWalletStorage {
        uint256 _released;
        mapping(address token => uint256) _erc20Released;
        uint64 _start;
        uint64 _duration;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.VestingWallet")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant VestingWalletStorageLocation = 0xa1eac494560f7591e4da38ed031587f09556afdfc4399dd2e205b935fdfa3900;

    function _getVestingWalletStorage() private pure returns (VestingWalletStorage storage $) {
        assembly {
            $.slot := VestingWalletStorageLocation
        }
    }

    /**
     * @dev Sets the sender as the initial owner, the beneficiary as the pending owner, the start timestamp and the
     * vesting duration of the vesting wallet.
     */
    function __VestingWallet_init(address beneficiary, uint64 startTimestamp, uint64 durationSeconds) internal onlyInitializing {
        __Ownable_init_unchained(beneficiary);
        __VestingWallet_init_unchained(beneficiary, startTimestamp, durationSeconds);
    }

    function __VestingWallet_init_unchained(address, uint64 startTimestamp, uint64 durationSeconds) internal onlyInitializing {
        VestingWalletStorage storage $ = _getVestingWalletStorage();
        $._start = startTimestamp;
        $._duration = durationSeconds;
    }

    /**
     * @dev The contract should be able to receive Eth.
     */
    receive() external payable virtual {}

    /**
     * @dev Getter for the start timestamp.
     */
    function start() public view virtual returns (uint256) {
        VestingWalletStorage storage $ = _getVestingWalletStorage();
        return $._start;
    }

    /**
     * @dev Getter for the vesting duration.
     */
    function duration() public view virtual returns (uint256) {
        VestingWalletStorage storage $ = _getVestingWalletStorage();
        return $._duration;
    }

    /**
     * @dev Getter for the end timestamp.
     */
    function end() public view virtual returns (uint256) {
        return start() + duration();
    }

    /**
     * @dev Amount of eth already released
     */
    function released() public view virtual returns (uint256) {
        VestingWalletStorage storage $ = _getVestingWalletStorage();
        return $._released;
    }

    /**
     * @dev Amount of token already released
     */
    function released(address token) public view virtual returns (uint256) {
        VestingWalletStorage storage $ = _getVestingWalletStorage();
        return $._erc20Released[token];
    }

    /**
     * @dev Getter for the amount of releasable eth.
     */
    function releasable() public view virtual returns (uint256) {
        return vestedAmount(uint64(block.timestamp)) - released();
    }

    /**
     * @dev Getter for the amount of releasable `token` tokens. `token` should be the address of an
     * IERC20 contract.
     */
    function releasable(address token) public view virtual returns (uint256) {
        return vestedAmount(token, uint64(block.timestamp)) - released(token);
    }

    /**
     * @dev Release the native token (ether) that have already vested.
     *
     * Emits a {EtherReleased} event.
     */
    function release() public virtual {
        VestingWalletStorage storage $ = _getVestingWalletStorage();
        uint256 amount = releasable();
        $._released += amount;
        emit EtherReleased(amount);
        AddressUpgradeable.sendValue(payable(owner()), amount);
    }

    /**
     * @dev Release the tokens that have already vested.
     *
     * Emits a {ERC20Released} event.
     */
    function release(address token) public virtual {
        VestingWalletStorage storage $ = _getVestingWalletStorage();
        uint256 amount = releasable(token);
        $._erc20Released[token] += amount;
        emit ERC20Released(token, amount);
        SafeERC20Upgradeable.safeTransfer(IERC20Upgradeable(token), owner(), amount);
    }

    /**
     * @dev Calculates the amount of ether that has already vested. Default implementation is a linear vesting curve.
     */
    function vestedAmount(uint64 timestamp) public view virtual returns (uint256) {
        return _vestingSchedule(address(this).balance + released(), timestamp);
    }

    /**
     * @dev Calculates the amount of tokens that has already vested. Default implementation is a linear vesting curve.
     */
    function vestedAmount(address token, uint64 timestamp) public view virtual returns (uint256) {
        return _vestingSchedule(IERC20Upgradeable(token).balanceOf(address(this)) + released(token), timestamp);
    }

    /**
     * @dev Virtual implementation of the vesting formula. This returns the amount vested, as a function of time, for
     * an asset given its total historical allocation.
     */
    function _vestingSchedule(uint256 totalAllocation, uint64 timestamp) internal view virtual returns (uint256) {
        if (timestamp < start()) {
            return 0;
        } else if (timestamp >= end()) {
            return totalAllocation;
        } else {
            return (totalAllocation * (timestamp - start())) / duration();
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/IGovernor.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../interfaces/IERC165Upgradeable.sol";
import { IERC6372Upgradeable } from "../interfaces/IERC6372Upgradeable.sol";

/**
 * @dev Interface of the {Governor} core.
 */
interface IGovernorUpgradeable is IERC165Upgradeable, IERC6372Upgradeable {
    enum ProposalState {
        Pending,
        Active,
        Canceled,
        Defeated,
        Succeeded,
        Queued,
        Expired,
        Executed
    }

    /**
     * @dev Empty proposal or a mismatch between the parameters length for a proposal call.
     */
    error GovernorInvalidProposalLength(uint256 targets, uint256 calldatas, uint256 values);

    /**
     * @dev The vote was already cast.
     */
    error GovernorAlreadyCastVote(address voter);

    /**
     * @dev Token deposits are disabled in this contract.
     */
    error GovernorDisabledDeposit();

    /**
     * @dev The `account` is not a proposer.
     */
    error GovernorOnlyProposer(address account);

    /**
     * @dev The `account` is not the governance executor.
     */
    error GovernorOnlyExecutor(address account);

    /**
     * @dev The `proposalId` doesn't exist.
     */
    error GovernorNonexistentProposal(uint256 proposalId);

    /**
     * @dev The current state of a proposal is not the required for performing an operation.
     * The `expectedStates` is a bitmap with the bits enabled for each ProposalState enum position
     * counting from right to left.
     *
     * NOTE: If `expectedState` is `bytes32(0)`, the proposal is expected to not be in any state (i.e. not exist).
     * This is the case when a proposal that is expected to be unset is already initiated (the proposal is duplicated).
     *
     * See {Governor-_encodeStateBitmap}.
     */
    error GovernorUnexpectedProposalState(uint256 proposalId, ProposalState current, bytes32 expectedStates);

    /**
     * @dev The voting period set is not a valid period.
     */
    error GovernorInvalidVotingPeriod(uint256 votingPeriod);

    /**
     * @dev The `proposer` does not have the required votes to create a proposal.
     */
    error GovernorInsufficientProposerVotes(address proposer, uint256 votes, uint256 threshold);

    /**
     * @dev The `proposer` is not allowed to create a proposal.
     */
    error GovernorRestrictedProposer(address proposer);

    /**
     * @dev The vote type used is not valid for the corresponding counting module.
     */
    error GovernorInvalidVoteType();

    /**
     * @dev Queue operation is not implemented for this governor. Execute should be called directly.
     */
    error GovernorQueueNotImplemented();

    /**
     * @dev The proposal hasn't been queued yet.
     */
    error GovernorNotQueuedProposal(uint256 proposalId);

    /**
     * @dev The proposal has already been queued.
     */
    error GovernorAlreadyQueuedProposal(uint256 proposalId);

    /**
     * @dev The provided signature is not valid for the expected `voter`.
     * If the `voter` is a contract, the signature is not valid using {IERC1271-isValidSignature}.
     */
    error GovernorInvalidSignature(address voter);

    /**
     * @dev Emitted when a proposal is created.
     */
    event ProposalCreated(
        uint256 proposalId,
        address proposer,
        address[] targets,
        uint256[] values,
        string[] signatures,
        bytes[] calldatas,
        uint256 voteStart,
        uint256 voteEnd,
        string description
    );

    /**
     * @dev Emitted when a proposal is queued.
     */
    event ProposalQueued(uint256 proposalId, uint256 etaSeconds);

    /**
     * @dev Emitted when a proposal is executed.
     */
    event ProposalExecuted(uint256 proposalId);

    /**
     * @dev Emitted when a proposal is canceled.
     */
    event ProposalCanceled(uint256 proposalId);

    /**
     * @dev Emitted when a vote is cast without params.
     *
     * Note: `support` values should be seen as buckets. Their interpretation depends on the voting module used.
     */
    event VoteCast(address indexed voter, uint256 proposalId, uint8 support, uint256 weight, string reason);

    /**
     * @dev Emitted when a vote is cast with params.
     *
     * Note: `support` values should be seen as buckets. Their interpretation depends on the voting module used.
     * `params` are additional encoded parameters. Their interpepretation also depends on the voting module used.
     */
    event VoteCastWithParams(
        address indexed voter,
        uint256 proposalId,
        uint8 support,
        uint256 weight,
        string reason,
        bytes params
    );

    /**
     * @notice module:core
     * @dev Name of the governor instance (used in building the ERC712 domain separator).
     */
    function name() external view returns (string memory);

    /**
     * @notice module:core
     * @dev Version of the governor instance (used in building the ERC712 domain separator). Default: "1"
     */
    function version() external view returns (string memory);

    /**
     * @notice module:voting
     * @dev A description of the possible `support` values for {castVote} and the way these votes are counted, meant to
     * be consumed by UIs to show correct vote options and interpret the results. The string is a URL-encoded sequence of
     * key-value pairs that each describe one aspect, for example `support=bravo&quorum=for,abstain`.
     *
     * There are 2 standard keys: `support` and `quorum`.
     *
     * - `support=bravo` refers to the vote options 0 = Against, 1 = For, 2 = Abstain, as in `GovernorBravo`.
     * - `quorum=bravo` means that only For votes are counted towards quorum.
     * - `quorum=for,abstain` means that both For and Abstain votes are counted towards quorum.
     *
     * If a counting module makes use of encoded `params`, it should  include this under a `params` key with a unique
     * name that describes the behavior. For example:
     *
     * - `params=fractional` might refer to a scheme where votes are divided fractionally between for/against/abstain.
     * - `params=erc721` might refer to a scheme where specific NFTs are delegated to vote.
     *
     * NOTE: The string can be decoded by the standard
     * https://developer.mozilla.org/en-US/docs/Web/API/URLSearchParams[`URLSearchParams`]
     * JavaScript class.
     */
    // solhint-disable-next-line func-name-mixedcase
    function COUNTING_MODE() external view returns (string memory);

    /**
     * @notice module:core
     * @dev Hashing function used to (re)build the proposal id from the proposal details..
     */
    function hashProposal(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external pure returns (uint256);

    /**
     * @notice module:core
     * @dev Current state of a proposal, following Compound's convention
     */
    function state(uint256 proposalId) external view returns (ProposalState);

    /**
     * @notice module:core
     * @dev The number of votes required in order for a voter to become a proposer.
     */
    function proposalThreshold() external view returns (uint256);

    /**
     * @notice module:core
     * @dev Timepoint used to retrieve user's votes and quorum. If using block number (as per Compound's Comp), the
     * snapshot is performed at the end of this block. Hence, voting for this proposal starts at the beginning of the
     * following block.
     */
    function proposalSnapshot(uint256 proposalId) external view returns (uint256);

    /**
     * @notice module:core
     * @dev Timepoint at which votes close. If using block number, votes close at the end of this block, so it is
     * possible to cast a vote during this block.
     */
    function proposalDeadline(uint256 proposalId) external view returns (uint256);

    /**
     * @notice module:core
     * @dev The account that created a proposal.
     */
    function proposalProposer(uint256 proposalId) external view returns (address);

    /**
     * @notice module:core
     * @dev The time when a queued proposal becomes executable ("ETA"). Unlike {proposalSnapshot} and
     * {proposalDeadline}, this doesn't use the governor clock, and instead relies on the executor's clock which may be
     * different. In most cases this will be a timestamp.
     */
    function proposalEta(uint256 proposalId) external view returns (uint256);

    /**
     * @notice module:core
     * @dev Whether a proposal needs to be queued before execution.
     */
    function proposalNeedsQueuing(uint256 proposalId) external view returns (bool);

    /**
     * @notice module:user-config
     * @dev Delay, between the proposal is created and the vote starts. The unit this duration is expressed in depends
     * on the clock (see EIP-6372) this contract uses.
     *
     * This can be increased to leave time for users to buy voting power, or delegate it, before the voting of a
     * proposal starts.
     *
     * NOTE: While this interface returns a uint256, timepoints are stored as uint48 following the ERC-6372 clock type.
     * Consequently this value must fit in a uint48 (when added to the current clock). See {IERC6372-clock}.
     */
    function votingDelay() external view returns (uint256);

    /**
     * @notice module:user-config
     * @dev Delay between the vote start and vote end. The unit this duration is expressed in depends on the clock
     * (see EIP-6372) this contract uses.
     *
     * NOTE: The {votingDelay} can delay the start of the vote. This must be considered when setting the voting
     * duration compared to the voting delay.
     *
     * NOTE: This value is stored when the proposal is submitted so that possible changes to the value do not affect
     * proposals that have already been submitted. The type used to save it is a uint32. Consequently, while this
     * interface returns a uint256, the value it returns should fit in a uint32.
     */
    function votingPeriod() external view returns (uint256);

    /**
     * @notice module:user-config
     * @dev Minimum number of cast voted required for a proposal to be successful.
     *
     * NOTE: The `timepoint` parameter corresponds to the snapshot used for counting vote. This allows to scale the
     * quorum depending on values such as the totalSupply of a token at this timepoint (see {ERC20Votes}).
     */
    function quorum(uint256 timepoint) external view returns (uint256);

    /**
     * @notice module:reputation
     * @dev Voting power of an `account` at a specific `timepoint`.
     *
     * Note: this can be implemented in a number of ways, for example by reading the delegated balance from one (or
     * multiple), {ERC20Votes} tokens.
     */
    function getVotes(address account, uint256 timepoint) external view returns (uint256);

    /**
     * @notice module:reputation
     * @dev Voting power of an `account` at a specific `timepoint` given additional encoded parameters.
     */
    function getVotesWithParams(
        address account,
        uint256 timepoint,
        bytes memory params
    ) external view returns (uint256);

    /**
     * @notice module:voting
     * @dev Returns whether `account` has cast a vote on `proposalId`.
     */
    function hasVoted(uint256 proposalId, address account) external view returns (bool);

    /**
     * @dev Create a new proposal. Vote start after a delay specified by {IGovernor-votingDelay} and lasts for a
     * duration specified by {IGovernor-votingPeriod}.
     *
     * Emits a {ProposalCreated} event.
     */
    function propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description
    ) external returns (uint256 proposalId);

    /**
     * @dev Queue a proposal. Some governors require this step to be performed before execution can happen. If queuing
     * is not necessary, this function may revert.
     * Queuing a proposal requires the quorum to be reached, the vote to be successful, and the deadline to be reached.
     *
     * Emits a {ProposalQueued} event.
     */
    function queue(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external returns (uint256 proposalId);

    /**
     * @dev Execute a successful proposal. This requires the quorum to be reached, the vote to be successful, and the
     * deadline to be reached. Depending on the governor it might also be required that the proposal was queued and
     * that some delay passed.
     *
     * Emits a {ProposalExecuted} event.
     *
     * NOTE: Some modules can modify the requirements for execution, for example by adding an additional timelock.
     */
    function execute(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external payable returns (uint256 proposalId);

    /**
     * @dev Cancel a proposal. A proposal is cancellable by the proposer, but only while it is Pending state, i.e.
     * before the vote starts.
     *
     * Emits a {ProposalCanceled} event.
     */
    function cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) external returns (uint256 proposalId);

    /**
     * @dev Cast a vote
     *
     * Emits a {VoteCast} event.
     */
    function castVote(uint256 proposalId, uint8 support) external returns (uint256 balance);

    /**
     * @dev Cast a vote with a reason
     *
     * Emits a {VoteCast} event.
     */
    function castVoteWithReason(
        uint256 proposalId,
        uint8 support,
        string calldata reason
    ) external returns (uint256 balance);

    /**
     * @dev Cast a vote with a reason and additional encoded parameters
     *
     * Emits a {VoteCast} or {VoteCastWithParams} event depending on the length of params.
     */
    function castVoteWithReasonAndParams(
        uint256 proposalId,
        uint8 support,
        string calldata reason,
        bytes memory params
    ) external returns (uint256 balance);

    /**
     * @dev Cast a vote using the voter's signature, including ERC-1271 signature support.
     *
     * Emits a {VoteCast} event.
     */
    function castVoteBySig(
        uint256 proposalId,
        uint8 support,
        address voter,
        bytes memory signature
    ) external returns (uint256 balance);

    /**
     * @dev Cast a vote with a reason and additional encoded parameters using the voter's signature,
     * including ERC-1271 signature support.
     *
     * Emits a {VoteCast} or {VoteCastWithParams} event depending on the length of params.
     */
    function castVoteWithReasonAndParamsBySig(
        uint256 proposalId,
        uint8 support,
        address voter,
        string calldata reason,
        bytes memory params,
        bytes memory signature
    ) external returns (uint256 balance);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/TimelockController.sol)

pragma solidity ^0.8.20;

import { AccessControlUpgradeable } from "../access/AccessControlUpgradeable.sol";
import { ERC721HolderUpgradeable } from "../token/ERC721/utils/ERC721HolderUpgradeable.sol";
import { ERC1155HolderUpgradeable } from "../token/ERC1155/utils/ERC1155HolderUpgradeable.sol";
import { AddressUpgradeable } from "../utils/AddressUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which acts as a timelocked controller. When set as the
 * owner of an `Ownable` smart contract, it enforces a timelock on all
 * `onlyOwner` maintenance operations. This gives time for users of the
 * controlled contract to exit before a potentially dangerous maintenance
 * operation is applied.
 *
 * By default, this contract is self administered, meaning administration tasks
 * have to go through the timelock process. The proposer (resp executor) role
 * is in charge of proposing (resp executing) operations. A common use case is
 * to position this {TimelockController} as the owner of a smart contract, with
 * a multisig or a DAO as the sole proposer.
 */
contract TimelockControllerUpgradeable is Initializable, AccessControlUpgradeable, ERC721HolderUpgradeable, ERC1155HolderUpgradeable {
    bytes32 public constant PROPOSER_ROLE = keccak256("PROPOSER_ROLE");
    bytes32 public constant EXECUTOR_ROLE = keccak256("EXECUTOR_ROLE");
    bytes32 public constant CANCELLER_ROLE = keccak256("CANCELLER_ROLE");
    uint256 internal constant _DONE_TIMESTAMP = uint256(1);

    /// @custom:storage-location erc7201:openzeppelin.storage.TimelockController
    struct TimelockControllerStorage {
        mapping(bytes32 id => uint256) _timestamps;
        uint256 _minDelay;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.TimelockController")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant TimelockControllerStorageLocation = 0x9a37c2aa9d186a0969ff8a8267bf4e07e864c2f2768f5040949e28a624fb3600;

    function _getTimelockControllerStorage() private pure returns (TimelockControllerStorage storage $) {
        assembly {
            $.slot := TimelockControllerStorageLocation
        }
    }

    enum OperationState {
        Unset,
        Waiting,
        Ready,
        Done
    }

    /**
     * @dev Mismatch between the parameters length for an operation call.
     */
    error TimelockInvalidOperationLength(uint256 targets, uint256 payloads, uint256 values);

    /**
     * @dev The schedule operation doesn't meet the minimum delay.
     */
    error TimelockInsufficientDelay(uint256 delay, uint256 minDelay);

    /**
     * @dev The current state of an operation is not as required.
     * The `expectedStates` is a bitmap with the bits enabled for each OperationState enum position
     * counting from right to left.
     *
     * See {_encodeStateBitmap}.
     */
    error TimelockUnexpectedOperationState(bytes32 operationId, bytes32 expectedStates);

    /**
     * @dev The predecessor to an operation not yet done.
     */
    error TimelockUnexecutedPredecessor(bytes32 predecessorId);

    /**
     * @dev The caller account is not authorized.
     */
    error TimelockUnauthorizedCaller(address caller);

    /**
     * @dev Emitted when a call is scheduled as part of operation `id`.
     */
    event CallScheduled(
        bytes32 indexed id,
        uint256 indexed index,
        address target,
        uint256 value,
        bytes data,
        bytes32 predecessor,
        uint256 delay
    );

    /**
     * @dev Emitted when a call is performed as part of operation `id`.
     */
    event CallExecuted(bytes32 indexed id, uint256 indexed index, address target, uint256 value, bytes data);

    /**
     * @dev Emitted when new proposal is scheduled with non-zero salt.
     */
    event CallSalt(bytes32 indexed id, bytes32 salt);

    /**
     * @dev Emitted when operation `id` is cancelled.
     */
    event Cancelled(bytes32 indexed id);

    /**
     * @dev Emitted when the minimum delay for future operations is modified.
     */
    event MinDelayChange(uint256 oldDuration, uint256 newDuration);

    /**
     * @dev Initializes the contract with the following parameters:
     *
     * - `minDelay`: initial minimum delay in seconds for operations
     * - `proposers`: accounts to be granted proposer and canceller roles
     * - `executors`: accounts to be granted executor role
     * - `admin`: optional account to be granted admin role; disable with zero address
     *
     * IMPORTANT: The optional admin can aid with initial configuration of roles after deployment
     * without being subject to delay, but this role should be subsequently renounced in favor of
     * administration through timelocked proposals. Previous versions of this contract would assign
     * this admin to the deployer automatically and should be renounced as well.
     */
    function __TimelockController_init(uint256 minDelay, address[] memory proposers, address[] memory executors, address admin) internal onlyInitializing {
        __TimelockController_init_unchained(minDelay, proposers, executors, admin);
    }

    function __TimelockController_init_unchained(uint256 minDelay, address[] memory proposers, address[] memory executors, address admin) internal onlyInitializing {
        TimelockControllerStorage storage $ = _getTimelockControllerStorage();
        // self administration
        _grantRole(DEFAULT_ADMIN_ROLE, address(this));

        // optional admin
        if (admin != address(0)) {
            _grantRole(DEFAULT_ADMIN_ROLE, admin);
        }

        // register proposers and cancellers
        for (uint256 i = 0; i < proposers.length; ++i) {
            _grantRole(PROPOSER_ROLE, proposers[i]);
            _grantRole(CANCELLER_ROLE, proposers[i]);
        }

        // register executors
        for (uint256 i = 0; i < executors.length; ++i) {
            _grantRole(EXECUTOR_ROLE, executors[i]);
        }

        $._minDelay = minDelay;
        emit MinDelayChange(0, minDelay);
    }

    /**
     * @dev Modifier to make a function callable only by a certain role. In
     * addition to checking the sender's role, `address(0)` 's role is also
     * considered. Granting a role to `address(0)` is equivalent to enabling
     * this role for everyone.
     */
    modifier onlyRoleOrOpenRole(bytes32 role) {
        if (!hasRole(role, address(0))) {
            _checkRole(role, _msgSender());
        }
        _;
    }

    /**
     * @dev Contract might receive/hold ETH as part of the maintenance process.
     */
    receive() external payable {}

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(
        bytes4 interfaceId
    ) public view virtual override(AccessControlUpgradeable, ERC1155HolderUpgradeable) returns (bool) {
        return super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns whether an id corresponds to a registered operation. This
     * includes both Waiting, Ready, and Done operations.
     */
    function isOperation(bytes32 id) public view returns (bool) {
        return getOperationState(id) != OperationState.Unset;
    }

    /**
     * @dev Returns whether an operation is pending or not. Note that a "pending" operation may also be "ready".
     */
    function isOperationPending(bytes32 id) public view returns (bool) {
        OperationState state = getOperationState(id);
        return state == OperationState.Waiting || state == OperationState.Ready;
    }

    /**
     * @dev Returns whether an operation is ready for execution. Note that a "ready" operation is also "pending".
     */
    function isOperationReady(bytes32 id) public view returns (bool) {
        return getOperationState(id) == OperationState.Ready;
    }

    /**
     * @dev Returns whether an operation is done or not.
     */
    function isOperationDone(bytes32 id) public view returns (bool) {
        return getOperationState(id) == OperationState.Done;
    }

    /**
     * @dev Returns the timestamp at which an operation becomes ready (0 for
     * unset operations, 1 for done operations).
     */
    function getTimestamp(bytes32 id) public view virtual returns (uint256) {
        TimelockControllerStorage storage $ = _getTimelockControllerStorage();
        return $._timestamps[id];
    }

    /**
     * @dev Returns operation state.
     */
    function getOperationState(bytes32 id) public view virtual returns (OperationState) {
        uint256 timestamp = getTimestamp(id);
        if (timestamp == 0) {
            return OperationState.Unset;
        } else if (timestamp == _DONE_TIMESTAMP) {
            return OperationState.Done;
        } else if (timestamp > block.timestamp) {
            return OperationState.Waiting;
        } else {
            return OperationState.Ready;
        }
    }

    /**
     * @dev Returns the minimum delay in seconds for an operation to become valid.
     *
     * This value can be changed by executing an operation that calls `updateDelay`.
     */
    function getMinDelay() public view virtual returns (uint256) {
        TimelockControllerStorage storage $ = _getTimelockControllerStorage();
        return $._minDelay;
    }

    /**
     * @dev Returns the identifier of an operation containing a single
     * transaction.
     */
    function hashOperation(
        address target,
        uint256 value,
        bytes calldata data,
        bytes32 predecessor,
        bytes32 salt
    ) public pure virtual returns (bytes32) {
        return keccak256(abi.encode(target, value, data, predecessor, salt));
    }

    /**
     * @dev Returns the identifier of an operation containing a batch of
     * transactions.
     */
    function hashOperationBatch(
        address[] calldata targets,
        uint256[] calldata values,
        bytes[] calldata payloads,
        bytes32 predecessor,
        bytes32 salt
    ) public pure virtual returns (bytes32) {
        return keccak256(abi.encode(targets, values, payloads, predecessor, salt));
    }

    /**
     * @dev Schedule an operation containing a single transaction.
     *
     * Emits {CallSalt} if salt is nonzero, and {CallScheduled}.
     *
     * Requirements:
     *
     * - the caller must have the 'proposer' role.
     */
    function schedule(
        address target,
        uint256 value,
        bytes calldata data,
        bytes32 predecessor,
        bytes32 salt,
        uint256 delay
    ) public virtual onlyRole(PROPOSER_ROLE) {
        bytes32 id = hashOperation(target, value, data, predecessor, salt);
        _schedule(id, delay);
        emit CallScheduled(id, 0, target, value, data, predecessor, delay);
        if (salt != bytes32(0)) {
            emit CallSalt(id, salt);
        }
    }

    /**
     * @dev Schedule an operation containing a batch of transactions.
     *
     * Emits {CallSalt} if salt is nonzero, and one {CallScheduled} event per transaction in the batch.
     *
     * Requirements:
     *
     * - the caller must have the 'proposer' role.
     */
    function scheduleBatch(
        address[] calldata targets,
        uint256[] calldata values,
        bytes[] calldata payloads,
        bytes32 predecessor,
        bytes32 salt,
        uint256 delay
    ) public virtual onlyRole(PROPOSER_ROLE) {
        if (targets.length != values.length || targets.length != payloads.length) {
            revert TimelockInvalidOperationLength(targets.length, payloads.length, values.length);
        }

        bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);
        _schedule(id, delay);
        for (uint256 i = 0; i < targets.length; ++i) {
            emit CallScheduled(id, i, targets[i], values[i], payloads[i], predecessor, delay);
        }
        if (salt != bytes32(0)) {
            emit CallSalt(id, salt);
        }
    }

    /**
     * @dev Schedule an operation that is to become valid after a given delay.
     */
    function _schedule(bytes32 id, uint256 delay) private {
        TimelockControllerStorage storage $ = _getTimelockControllerStorage();
        if (isOperation(id)) {
            revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Unset));
        }
        uint256 minDelay = getMinDelay();
        if (delay < minDelay) {
            revert TimelockInsufficientDelay(delay, minDelay);
        }
        $._timestamps[id] = block.timestamp + delay;
    }

    /**
     * @dev Cancel an operation.
     *
     * Requirements:
     *
     * - the caller must have the 'canceller' role.
     */
    function cancel(bytes32 id) public virtual onlyRole(CANCELLER_ROLE) {
        TimelockControllerStorage storage $ = _getTimelockControllerStorage();
        if (!isOperationPending(id)) {
            revert TimelockUnexpectedOperationState(
                id,
                _encodeStateBitmap(OperationState.Waiting) | _encodeStateBitmap(OperationState.Ready)
            );
        }
        delete $._timestamps[id];

        emit Cancelled(id);
    }

    /**
     * @dev Execute an (ready) operation containing a single transaction.
     *
     * Emits a {CallExecuted} event.
     *
     * Requirements:
     *
     * - the caller must have the 'executor' role.
     */
    // This function can reenter, but it doesn't pose a risk because _afterCall checks that the proposal is pending,
    // thus any modifications to the operation during reentrancy should be caught.
    // slither-disable-next-line reentrancy-eth
    function execute(
        address target,
        uint256 value,
        bytes calldata payload,
        bytes32 predecessor,
        bytes32 salt
    ) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
        bytes32 id = hashOperation(target, value, payload, predecessor, salt);

        _beforeCall(id, predecessor);
        _execute(target, value, payload);
        emit CallExecuted(id, 0, target, value, payload);
        _afterCall(id);
    }

    /**
     * @dev Execute an (ready) operation containing a batch of transactions.
     *
     * Emits one {CallExecuted} event per transaction in the batch.
     *
     * Requirements:
     *
     * - the caller must have the 'executor' role.
     */
    // This function can reenter, but it doesn't pose a risk because _afterCall checks that the proposal is pending,
    // thus any modifications to the operation during reentrancy should be caught.
    // slither-disable-next-line reentrancy-eth
    function executeBatch(
        address[] calldata targets,
        uint256[] calldata values,
        bytes[] calldata payloads,
        bytes32 predecessor,
        bytes32 salt
    ) public payable virtual onlyRoleOrOpenRole(EXECUTOR_ROLE) {
        if (targets.length != values.length || targets.length != payloads.length) {
            revert TimelockInvalidOperationLength(targets.length, payloads.length, values.length);
        }

        bytes32 id = hashOperationBatch(targets, values, payloads, predecessor, salt);

        _beforeCall(id, predecessor);
        for (uint256 i = 0; i < targets.length; ++i) {
            address target = targets[i];
            uint256 value = values[i];
            bytes calldata payload = payloads[i];
            _execute(target, value, payload);
            emit CallExecuted(id, i, target, value, payload);
        }
        _afterCall(id);
    }

    /**
     * @dev Execute an operation's call.
     */
    function _execute(address target, uint256 value, bytes calldata data) internal virtual {
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        AddressUpgradeable.verifyCallResult(success, returndata);
    }

    /**
     * @dev Checks before execution of an operation's calls.
     */
    function _beforeCall(bytes32 id, bytes32 predecessor) private view {
        if (!isOperationReady(id)) {
            revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Ready));
        }
        if (predecessor != bytes32(0) && !isOperationDone(predecessor)) {
            revert TimelockUnexecutedPredecessor(predecessor);
        }
    }

    /**
     * @dev Checks after execution of an operation's calls.
     */
    function _afterCall(bytes32 id) private {
        TimelockControllerStorage storage $ = _getTimelockControllerStorage();
        if (!isOperationReady(id)) {
            revert TimelockUnexpectedOperationState(id, _encodeStateBitmap(OperationState.Ready));
        }
        $._timestamps[id] = _DONE_TIMESTAMP;
    }

    /**
     * @dev Changes the minimum timelock duration for future operations.
     *
     * Emits a {MinDelayChange} event.
     *
     * Requirements:
     *
     * - the caller must be the timelock itself. This can only be achieved by scheduling and later executing
     * an operation where the timelock is the target and the data is the ABI-encoded call to this function.
     */
    function updateDelay(uint256 newDelay) external virtual {
        TimelockControllerStorage storage $ = _getTimelockControllerStorage();
        address sender = _msgSender();
        if (sender != address(this)) {
            revert TimelockUnauthorizedCaller(sender);
        }
        emit MinDelayChange($._minDelay, newDelay);
        $._minDelay = newDelay;
    }

    /**
     * @dev Encodes a `OperationState` into a `bytes32` representation where each bit enabled corresponds to
     * the underlying position in the `OperationState` enum. For example:
     *
     * 0x000...1000
     *   ^^^^^^----- ...
     *         ^---- Done
     *          ^--- Ready
     *           ^-- Waiting
     *            ^- Unset
     */
    function _encodeStateBitmap(OperationState operationState) internal pure returns (bytes32) {
        return bytes32(1 << uint8(operationState));
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/extensions/GovernorCountingSimple.sol)

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {Governor} for simple, 3 options, vote counting.
 */
abstract contract GovernorCountingSimpleUpgradeable is Initializable, GovernorUpgradeable {
    /**
     * @dev Supported vote types. Matches Governor Bravo ordering.
     */
    enum VoteType {
        Against,
        For,
        Abstain
    }

    struct ProposalVote {
        uint256 againstVotes;
        uint256 forVotes;
        uint256 abstainVotes;
        mapping(address voter => bool) hasVoted;
    }

    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorCountingSimple
    struct GovernorCountingSimpleStorage {
        mapping(uint256 proposalId => ProposalVote) _proposalVotes;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorCountingSimple")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorCountingSimpleStorageLocation = 0xa1cefa0f43667ef127a258e673c94202a79b656e62899531c4376d87a7f39800;

    function _getGovernorCountingSimpleStorage() private pure returns (GovernorCountingSimpleStorage storage $) {
        assembly {
            $.slot := GovernorCountingSimpleStorageLocation
        }
    }

    function __GovernorCountingSimple_init() internal onlyInitializing {
    }

    function __GovernorCountingSimple_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IGovernor-COUNTING_MODE}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function COUNTING_MODE() public pure virtual override returns (string memory) {
        return "support=bravo&quorum=for,abstain";
    }

    /**
     * @dev See {IGovernor-hasVoted}.
     */
    function hasVoted(uint256 proposalId, address account) public view virtual override returns (bool) {
        GovernorCountingSimpleStorage storage $ = _getGovernorCountingSimpleStorage();
        return $._proposalVotes[proposalId].hasVoted[account];
    }

    /**
     * @dev Accessor to the internal vote counts.
     */
    function proposalVotes(
        uint256 proposalId
    ) public view virtual returns (uint256 againstVotes, uint256 forVotes, uint256 abstainVotes) {
        GovernorCountingSimpleStorage storage $ = _getGovernorCountingSimpleStorage();
        ProposalVote storage proposalVote = $._proposalVotes[proposalId];
        return (proposalVote.againstVotes, proposalVote.forVotes, proposalVote.abstainVotes);
    }

    /**
     * @dev See {Governor-_quorumReached}.
     */
    function _quorumReached(uint256 proposalId) internal view virtual override returns (bool) {
        GovernorCountingSimpleStorage storage $ = _getGovernorCountingSimpleStorage();
        ProposalVote storage proposalVote = $._proposalVotes[proposalId];

        return quorum(proposalSnapshot(proposalId)) <= proposalVote.forVotes + proposalVote.abstainVotes;
    }

    /**
     * @dev See {Governor-_voteSucceeded}. In this module, the forVotes must be strictly over the againstVotes.
     */
    function _voteSucceeded(uint256 proposalId) internal view virtual override returns (bool) {
        GovernorCountingSimpleStorage storage $ = _getGovernorCountingSimpleStorage();
        ProposalVote storage proposalVote = $._proposalVotes[proposalId];

        return proposalVote.forVotes > proposalVote.againstVotes;
    }

    /**
     * @dev See {Governor-_countVote}. In this module, the support follows the `VoteType` enum (from Governor Bravo).
     */
    function _countVote(
        uint256 proposalId,
        address account,
        uint8 support,
        uint256 weight,
        bytes memory // params
    ) internal virtual override {
        GovernorCountingSimpleStorage storage $ = _getGovernorCountingSimpleStorage();
        ProposalVote storage proposalVote = $._proposalVotes[proposalId];

        if (proposalVote.hasVoted[account]) {
            revert GovernorAlreadyCastVote(account);
        }
        proposalVote.hasVoted[account] = true;

        if (support == uint8(VoteType.Against)) {
            proposalVote.againstVotes += weight;
        } else if (support == uint8(VoteType.For)) {
            proposalVote.forVotes += weight;
        } else if (support == uint8(VoteType.Abstain)) {
            proposalVote.abstainVotes += weight;
        } else {
            revert GovernorInvalidVoteType();
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/extensions/GovernorPreventLateQuorum.sol)

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import { MathUpgradeable } from "../../utils/math/MathUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev A module that ensures there is a minimum voting period after quorum is reached. This prevents a large voter from
 * swaying a vote and triggering quorum at the last minute, by ensuring there is always time for other voters to react
 * and try to oppose the decision.
 *
 * If a vote causes quorum to be reached, the proposal's voting period may be extended so that it does not end before at
 * least a specified time has passed (the "vote extension" parameter). This parameter can be set through a governance
 * proposal.
 */
abstract contract GovernorPreventLateQuorumUpgradeable is Initializable, GovernorUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorPreventLateQuorum
    struct GovernorPreventLateQuorumStorage {
        uint48 _voteExtension;

        mapping(uint256 proposalId => uint48) _extendedDeadlines;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorPreventLateQuorum")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorPreventLateQuorumStorageLocation = 0x042f525fd47e44d02e065dd7bb464f47b4f926fbd05b5e087891ebd756adf100;

    function _getGovernorPreventLateQuorumStorage() private pure returns (GovernorPreventLateQuorumStorage storage $) {
        assembly {
            $.slot := GovernorPreventLateQuorumStorageLocation
        }
    }

    /// @dev Emitted when a proposal deadline is pushed back due to reaching quorum late in its voting period.
    event ProposalExtended(uint256 indexed proposalId, uint64 extendedDeadline);

    /// @dev Emitted when the {lateQuorumVoteExtension} parameter is changed.
    event LateQuorumVoteExtensionSet(uint64 oldVoteExtension, uint64 newVoteExtension);

    /**
     * @dev Initializes the vote extension parameter: the time in either number of blocks or seconds (depending on the
     * governor clock mode) that is required to pass since the moment a proposal reaches quorum until its voting period
     * ends. If necessary the voting period will be extended beyond the one set during proposal creation.
     */
    function __GovernorPreventLateQuorum_init(uint48 initialVoteExtension) internal onlyInitializing {
        __GovernorPreventLateQuorum_init_unchained(initialVoteExtension);
    }

    function __GovernorPreventLateQuorum_init_unchained(uint48 initialVoteExtension) internal onlyInitializing {
        _setLateQuorumVoteExtension(initialVoteExtension);
    }

    /**
     * @dev Returns the proposal deadline, which may have been extended beyond that set at proposal creation, if the
     * proposal reached quorum late in the voting period. See {Governor-proposalDeadline}.
     */
    function proposalDeadline(uint256 proposalId) public view virtual override returns (uint256) {
        GovernorPreventLateQuorumStorage storage $ = _getGovernorPreventLateQuorumStorage();
        return MathUpgradeable.max(super.proposalDeadline(proposalId), $._extendedDeadlines[proposalId]);
    }

    /**
     * @dev Casts a vote and detects if it caused quorum to be reached, potentially extending the voting period. See
     * {Governor-_castVote}.
     *
     * May emit a {ProposalExtended} event.
     */
    function _castVote(
        uint256 proposalId,
        address account,
        uint8 support,
        string memory reason,
        bytes memory params
    ) internal virtual override returns (uint256) {
        GovernorPreventLateQuorumStorage storage $ = _getGovernorPreventLateQuorumStorage();
        uint256 result = super._castVote(proposalId, account, support, reason, params);

        if ($._extendedDeadlines[proposalId] == 0 && _quorumReached(proposalId)) {
            uint48 extendedDeadline = clock() + lateQuorumVoteExtension();

            if (extendedDeadline > proposalDeadline(proposalId)) {
                emit ProposalExtended(proposalId, extendedDeadline);
            }

            $._extendedDeadlines[proposalId] = extendedDeadline;
        }

        return result;
    }

    /**
     * @dev Returns the current value of the vote extension parameter: the number of blocks that are required to pass
     * from the time a proposal reaches quorum until its voting period ends.
     */
    function lateQuorumVoteExtension() public view virtual returns (uint48) {
        GovernorPreventLateQuorumStorage storage $ = _getGovernorPreventLateQuorumStorage();
        return $._voteExtension;
    }

    /**
     * @dev Changes the {lateQuorumVoteExtension}. This operation can only be performed by the governance executor,
     * generally through a governance proposal.
     *
     * Emits a {LateQuorumVoteExtensionSet} event.
     */
    function setLateQuorumVoteExtension(uint48 newVoteExtension) public virtual onlyGovernance {
        _setLateQuorumVoteExtension(newVoteExtension);
    }

    /**
     * @dev Changes the {lateQuorumVoteExtension}. This is an internal function that can be exposed in a public function
     * like {setLateQuorumVoteExtension} if another access control mechanism is needed.
     *
     * Emits a {LateQuorumVoteExtensionSet} event.
     */
    function _setLateQuorumVoteExtension(uint48 newVoteExtension) internal virtual {
        GovernorPreventLateQuorumStorage storage $ = _getGovernorPreventLateQuorumStorage();
        emit LateQuorumVoteExtensionSet($._voteExtension, newVoteExtension);
        $._voteExtension = newVoteExtension;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/extensions/GovernorSettings.sol)

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {Governor} for settings updatable through governance.
 */
abstract contract GovernorSettingsUpgradeable is Initializable, GovernorUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorSettings
    struct GovernorSettingsStorage {
        // amount of token
        uint256 _proposalThreshold;
        // timepoint: limited to uint48 in core (same as clock() type)
        uint48 _votingDelay;
        // duration: limited to uint32 in core
        uint32 _votingPeriod;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorSettings")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorSettingsStorageLocation = 0x00d7616c8fe29c6c2fbe1d0c5bc8f2faa4c35b43746e70b24b4d532752affd00;

    function _getGovernorSettingsStorage() private pure returns (GovernorSettingsStorage storage $) {
        assembly {
            $.slot := GovernorSettingsStorageLocation
        }
    }

    event VotingDelaySet(uint256 oldVotingDelay, uint256 newVotingDelay);
    event VotingPeriodSet(uint256 oldVotingPeriod, uint256 newVotingPeriod);
    event ProposalThresholdSet(uint256 oldProposalThreshold, uint256 newProposalThreshold);

    /**
     * @dev Initialize the governance parameters.
     */
    function __GovernorSettings_init(uint48 initialVotingDelay, uint32 initialVotingPeriod, uint256 initialProposalThreshold) internal onlyInitializing {
        __GovernorSettings_init_unchained(initialVotingDelay, initialVotingPeriod, initialProposalThreshold);
    }

    function __GovernorSettings_init_unchained(uint48 initialVotingDelay, uint32 initialVotingPeriod, uint256 initialProposalThreshold) internal onlyInitializing {
        _setVotingDelay(initialVotingDelay);
        _setVotingPeriod(initialVotingPeriod);
        _setProposalThreshold(initialProposalThreshold);
    }

    /**
     * @dev See {IGovernor-votingDelay}.
     */
    function votingDelay() public view virtual override returns (uint256) {
        GovernorSettingsStorage storage $ = _getGovernorSettingsStorage();
        return $._votingDelay;
    }

    /**
     * @dev See {IGovernor-votingPeriod}.
     */
    function votingPeriod() public view virtual override returns (uint256) {
        GovernorSettingsStorage storage $ = _getGovernorSettingsStorage();
        return $._votingPeriod;
    }

    /**
     * @dev See {Governor-proposalThreshold}.
     */
    function proposalThreshold() public view virtual override returns (uint256) {
        GovernorSettingsStorage storage $ = _getGovernorSettingsStorage();
        return $._proposalThreshold;
    }

    /**
     * @dev Update the voting delay. This operation can only be performed through a governance proposal.
     *
     * Emits a {VotingDelaySet} event.
     */
    function setVotingDelay(uint48 newVotingDelay) public virtual onlyGovernance {
        _setVotingDelay(newVotingDelay);
    }

    /**
     * @dev Update the voting period. This operation can only be performed through a governance proposal.
     *
     * Emits a {VotingPeriodSet} event.
     */
    function setVotingPeriod(uint32 newVotingPeriod) public virtual onlyGovernance {
        _setVotingPeriod(newVotingPeriod);
    }

    /**
     * @dev Update the proposal threshold. This operation can only be performed through a governance proposal.
     *
     * Emits a {ProposalThresholdSet} event.
     */
    function setProposalThreshold(uint256 newProposalThreshold) public virtual onlyGovernance {
        _setProposalThreshold(newProposalThreshold);
    }

    /**
     * @dev Internal setter for the voting delay.
     *
     * Emits a {VotingDelaySet} event.
     */
    function _setVotingDelay(uint48 newVotingDelay) internal virtual {
        GovernorSettingsStorage storage $ = _getGovernorSettingsStorage();
        emit VotingDelaySet($._votingDelay, newVotingDelay);
        $._votingDelay = newVotingDelay;
    }

    /**
     * @dev Internal setter for the voting period.
     *
     * Emits a {VotingPeriodSet} event.
     */
    function _setVotingPeriod(uint32 newVotingPeriod) internal virtual {
        GovernorSettingsStorage storage $ = _getGovernorSettingsStorage();
        if (newVotingPeriod == 0) {
            revert GovernorInvalidVotingPeriod(0);
        }
        emit VotingPeriodSet($._votingPeriod, newVotingPeriod);
        $._votingPeriod = newVotingPeriod;
    }

    /**
     * @dev Internal setter for the proposal threshold.
     *
     * Emits a {ProposalThresholdSet} event.
     */
    function _setProposalThreshold(uint256 newProposalThreshold) internal virtual {
        GovernorSettingsStorage storage $ = _getGovernorSettingsStorage();
        emit ProposalThresholdSet($._proposalThreshold, newProposalThreshold);
        $._proposalThreshold = newProposalThreshold;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {Governor} that implements storage of proposal details. This modules also provides primitives for
 * the enumerability of proposals.
 *
 * Use cases for this module include:
 * - UIs that explore the proposal state without relying on event indexing.
 * - Using only the proposalId as an argument in the {Governor-queue} and {Governor-execute} functions for L2 chains
 *   where storage is cheap compared to calldata.
 */
abstract contract GovernorStorageUpgradeable is Initializable, GovernorUpgradeable {
    struct ProposalDetails {
        address[] targets;
        uint256[] values;
        bytes[] calldatas;
        bytes32 descriptionHash;
    }

    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorStorage
    struct GovernorStorageStorage {
        uint256[] _proposalIds;
        mapping(uint256 proposalId => ProposalDetails) _proposalDetails;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorStorage")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorStorageStorageLocation = 0x7fd223d3380145bd26132714391e777c488a0df7ac2dd4b66419d8549fb3a600;

    function _getGovernorStorageStorage() private pure returns (GovernorStorageStorage storage $) {
        assembly {
            $.slot := GovernorStorageStorageLocation
        }
    }

    function __GovernorStorage_init() internal onlyInitializing {
    }

    function __GovernorStorage_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Hook into the proposing mechanism
     */
    function _propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description,
        address proposer
    ) internal virtual override returns (uint256) {
        GovernorStorageStorage storage $ = _getGovernorStorageStorage();
        uint256 proposalId = super._propose(targets, values, calldatas, description, proposer);

        // store
        $._proposalIds.push(proposalId);
        $._proposalDetails[proposalId] = ProposalDetails({
            targets: targets,
            values: values,
            calldatas: calldatas,
            descriptionHash: keccak256(bytes(description))
        });

        return proposalId;
    }

    /**
     * @dev Version of {IGovernorTimelock-queue} with only `proposalId` as an argument.
     */
    function queue(uint256 proposalId) public virtual {
        GovernorStorageStorage storage $ = _getGovernorStorageStorage();
        // here, using storage is more efficient than memory
        ProposalDetails storage details = $._proposalDetails[proposalId];
        queue(details.targets, details.values, details.calldatas, details.descriptionHash);
    }

    /**
     * @dev Version of {IGovernor-execute} with only `proposalId` as an argument.
     */
    function execute(uint256 proposalId) public payable virtual {
        GovernorStorageStorage storage $ = _getGovernorStorageStorage();
        // here, using storage is more efficient than memory
        ProposalDetails storage details = $._proposalDetails[proposalId];
        execute(details.targets, details.values, details.calldatas, details.descriptionHash);
    }

    /**
     * @dev ProposalId version of {IGovernor-cancel}.
     */
    function cancel(uint256 proposalId) public virtual {
        GovernorStorageStorage storage $ = _getGovernorStorageStorage();
        // here, using storage is more efficient than memory
        ProposalDetails storage details = $._proposalDetails[proposalId];
        cancel(details.targets, details.values, details.calldatas, details.descriptionHash);
    }

    /**
     * @dev Returns the number of stored proposals.
     */
    function proposalCount() public view virtual returns (uint256) {
        GovernorStorageStorage storage $ = _getGovernorStorageStorage();
        return $._proposalIds.length;
    }

    /**
     * @dev Returns the details of a proposalId. Reverts if `proposalId` is not a known proposal.
     */
    function proposalDetails(
        uint256 proposalId
    ) public view virtual returns (address[] memory, uint256[] memory, bytes[] memory, bytes32) {
        GovernorStorageStorage storage $ = _getGovernorStorageStorage();
        // here, using memory is more efficient than storage
        ProposalDetails memory details = $._proposalDetails[proposalId];
        if (details.descriptionHash == 0) {
            revert GovernorNonexistentProposal(proposalId);
        }
        return (details.targets, details.values, details.calldatas, details.descriptionHash);
    }

    /**
     * @dev Returns the details (including the proposalId) of a proposal given its sequential index.
     */
    function proposalDetailsAt(
        uint256 index
    ) public view virtual returns (uint256, address[] memory, uint256[] memory, bytes[] memory, bytes32) {
        GovernorStorageStorage storage $ = _getGovernorStorageStorage();
        uint256 proposalId = $._proposalIds[index];
        (
            address[] memory targets,
            uint256[] memory values,
            bytes[] memory calldatas,
            bytes32 descriptionHash
        ) = proposalDetails(proposalId);
        return (proposalId, targets, values, calldatas, descriptionHash);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import { AuthorityUtilsUpgradeable } from "../../access/manager/AuthorityUtilsUpgradeable.sol";
import { IAccessManagerUpgradeable } from "../../access/manager/IAccessManagerUpgradeable.sol";
import { AddressUpgradeable } from "../../utils/AddressUpgradeable.sol";
import { MathUpgradeable } from "../../utils/math/MathUpgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import { TimeUpgradeable } from "../../utils/types/TimeUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev This module connects a {Governor} instance to an {AccessManager} instance, allowing the governor to make calls
 * that are delay-restricted by the manager using the normal {queue} workflow. An optional base delay is applied to
 * operations that are not delayed externally by the manager. Execution of a proposal will be delayed as much as
 * necessary to meet the required delays of all of its operations.
 *
 * This extension allows the governor to hold and use its own assets and permissions, unlike {GovernorTimelockControl}
 * and {GovernorTimelockCompound}, where the timelock is a separate contract that must be the one to hold assets and
 * permissions. Operations that are delay-restricted by the manager, however, will be executed through the
 * {AccessManager-execute} function.
 *
 * ==== Security Considerations
 *
 * Some operations may be cancelable in the `AccessManager` by the admin or a set of guardians, depending on the
 * restricted function being invoked. Since proposals are atomic, the cancellation by a guardian of a single operation
 * in a proposal will cause all of the proposal to become unable to execute. Consider proposing cancellable operations
 * separately.
 *
 * By default, function calls will be routed through the associated `AccessManager` whenever it claims the target
 * function to be restricted by it. However, admins may configure the manager to make that claim for functions that a
 * governor would want to call directly (e.g., token transfers) in an attempt to deny it access to those functions. To
 * mitigate this attack vector, the governor is able to ignore the restrictions claimed by the `AccessManager` using
 * {setAccessManagerIgnored}. While permanent denial of service is mitigated, temporary DoS may still be technically
 * possible. All of the governor's own functions (e.g., {setBaseDelaySeconds}) ignore the `AccessManager` by default.
 */
abstract contract GovernorTimelockAccessUpgradeable is Initializable, GovernorUpgradeable {
    // An execution plan is produced at the moment a proposal is created, in order to fix at that point the exact
    // execution semantics of the proposal, namely whether a call will go through {AccessManager-execute}.
    struct ExecutionPlan {
        uint16 length;
        uint32 delay;
        // We use mappings instead of arrays because it allows us to pack values in storage more tightly without
        // storing the length redundantly.
        // We pack 8 operations' data in each bucket. Each uint32 value is set to 1 upon proposal creation if it has
        // to be scheduled and executed through the manager. Upon queuing, the value is set to nonce + 2, where the
        // nonce is received from the manager when scheduling the operation.
        mapping(uint256 operationBucket => uint32[8]) managerData;
    }

    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorTimelockAccess
    struct GovernorTimelockAccessStorage {
        // The meaning of the "toggle" set to true depends on the target contract.
        // If target == address(this), the manager is ignored by default, and a true toggle means it won't be ignored.
        // For all other target contracts, the manager is used by default, and a true toggle means it will be ignored.
        mapping(address target => mapping(bytes4 selector => bool)) _ignoreToggle;

        mapping(uint256 proposalId => ExecutionPlan) _executionPlan;

        uint32 _baseDelay;

        IAccessManagerUpgradeable _manager;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorTimelockAccess")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorTimelockAccessStorageLocation = 0xb26e23d38df572f5669f6310d407229c15b4fb320cb19bf5e8c38856d28d0800;

    function _getGovernorTimelockAccessStorage() private pure returns (GovernorTimelockAccessStorage storage $) {
        assembly {
            $.slot := GovernorTimelockAccessStorageLocation
        }
    }

    error GovernorUnmetDelay(uint256 proposalId, uint256 neededTimestamp);
    error GovernorMismatchedNonce(uint256 proposalId, uint256 expectedNonce, uint256 actualNonce);
    error GovernorLockedIgnore();

    event BaseDelaySet(uint32 oldBaseDelaySeconds, uint32 newBaseDelaySeconds);
    event AccessManagerIgnoredSet(address target, bytes4 selector, bool ignored);

    /**
     * @dev Initialize the governor with an {AccessManager} and initial base delay.
     */
    function __GovernorTimelockAccess_init(address manager, uint32 initialBaseDelay) internal onlyInitializing {
        __GovernorTimelockAccess_init_unchained(manager, initialBaseDelay);
    }

    function __GovernorTimelockAccess_init_unchained(address manager, uint32 initialBaseDelay) internal onlyInitializing {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        $._manager = IAccessManagerUpgradeable(manager);
        _setBaseDelaySeconds(initialBaseDelay);
    }

    /**
     * @dev Returns the {AccessManager} instance associated to this governor.
     */
    function accessManager() public view virtual returns (IAccessManagerUpgradeable) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        return $._manager;
    }

    /**
     * @dev Base delay that will be applied to all function calls. Some may be further delayed by their associated
     * `AccessManager` authority; in this case the final delay will be the maximum of the base delay and the one
     * demanded by the authority.
     *
     * NOTE: Execution delays are processed by the `AccessManager` contracts, and according to that contract are
     * expressed in seconds. Therefore, the base delay is also in seconds, regardless of the governor's clock mode.
     */
    function baseDelaySeconds() public view virtual returns (uint32) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        return $._baseDelay;
    }

    /**
     * @dev Change the value of {baseDelaySeconds}. This operation can only be invoked through a governance proposal.
     */
    function setBaseDelaySeconds(uint32 newBaseDelay) public virtual onlyGovernance {
        _setBaseDelaySeconds(newBaseDelay);
    }

    /**
     * @dev Change the value of {baseDelaySeconds}. Internal function without access control.
     */
    function _setBaseDelaySeconds(uint32 newBaseDelay) internal virtual {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        emit BaseDelaySet($._baseDelay, newBaseDelay);
        $._baseDelay = newBaseDelay;
    }

    /**
     * @dev Check if restrictions from the associated {AccessManager} are ignored for a target function. Returns true
     * when the target function will be invoked directly regardless of `AccessManager` settings for the function.
     * See {setAccessManagerIgnored} and Security Considerations above.
     */
    function isAccessManagerIgnored(address target, bytes4 selector) public view virtual returns (bool) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        bool isGovernor = target == address(this);
        return $._ignoreToggle[target][selector] != isGovernor; // equivalent to: isGovernor ? !toggle : toggle
    }

    /**
     * @dev Configure whether restrictions from the associated {AccessManager} are ignored for a target function.
     * See Security Considerations above.
     */
    function setAccessManagerIgnored(
        address target,
        bytes4[] calldata selectors,
        bool ignored
    ) public virtual onlyGovernance {
        for (uint256 i = 0; i < selectors.length; ++i) {
            _setAccessManagerIgnored(target, selectors[i], ignored);
        }
    }

    /**
     * @dev Internal version of {setAccessManagerIgnored} without access restriction.
     */
    function _setAccessManagerIgnored(address target, bytes4 selector, bool ignored) internal virtual {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        bool isGovernor = target == address(this);
        if (isGovernor && selector == this.setAccessManagerIgnored.selector) {
            revert GovernorLockedIgnore();
        }
        $._ignoreToggle[target][selector] = ignored != isGovernor; // equivalent to: isGovernor ? !ignored : ignored
        emit AccessManagerIgnoredSet(target, selector, ignored);
    }

    /**
     * @dev Public accessor to check the execution plan, including the number of seconds that the proposal will be
     * delayed since queuing, an array indicating which of the proposal actions will be executed indirectly through
     * the associated {AccessManager}, and another indicating which will be scheduled in {queue}. Note that
     * those that must be scheduled are cancellable by `AccessManager` guardians.
     */
    function proposalExecutionPlan(
        uint256 proposalId
    ) public view returns (uint32 delay, bool[] memory indirect, bool[] memory withDelay) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        ExecutionPlan storage plan = $._executionPlan[proposalId];

        uint32 length = plan.length;
        delay = plan.delay;
        indirect = new bool[](length);
        withDelay = new bool[](length);
        for (uint256 i = 0; i < length; ++i) {
            (indirect[i], withDelay[i], ) = _getManagerData(plan, i);
        }

        return (delay, indirect, withDelay);
    }

    /**
     * @dev See {IGovernor-proposalNeedsQueuing}.
     */
    function proposalNeedsQueuing(uint256 proposalId) public view virtual override returns (bool) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        return $._executionPlan[proposalId].delay > 0;
    }

    /**
     * @dev See {IGovernor-propose}
     */
    function propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description
    ) public virtual override returns (uint256) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        uint256 proposalId = super.propose(targets, values, calldatas, description);

        uint32 neededDelay = baseDelaySeconds();

        ExecutionPlan storage plan = $._executionPlan[proposalId];
        plan.length = SafeCastUpgradeable.toUint16(targets.length);

        for (uint256 i = 0; i < targets.length; ++i) {
            address target = targets[i];
            bytes4 selector = bytes4(calldatas[i]);
            (bool immediate, uint32 delay) = AuthorityUtilsUpgradeable.canCallWithDelay(
                address($._manager),
                address(this),
                target,
                selector
            );
            if ((immediate || delay > 0) && !isAccessManagerIgnored(target, selector)) {
                _setManagerData(plan, i, !immediate, 0);
                // downcast is safe because both arguments are uint32
                neededDelay = uint32(MathUpgradeable.max(delay, neededDelay));
            }
        }

        plan.delay = neededDelay;

        return proposalId;
    }

    /**
     * @dev Mechanism to queue a proposal, potentially scheduling some of its operations in the AccessManager.
     *
     * NOTE: The execution delay is chosen based on the delay information retrieved in {propose}. This value may be
     * off if the delay was updated since proposal creation. In this case, the proposal needs to be recreated.
     */
    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory /* values */,
        bytes[] memory calldatas,
        bytes32 /* descriptionHash */
    ) internal virtual override returns (uint48) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        ExecutionPlan storage plan = $._executionPlan[proposalId];
        uint48 etaSeconds = TimeUpgradeable.timestamp() + plan.delay;

        for (uint256 i = 0; i < targets.length; ++i) {
            (, bool withDelay, ) = _getManagerData(plan, i);
            if (withDelay) {
                (, uint32 nonce) = $._manager.schedule(targets[i], calldatas[i], etaSeconds);
                _setManagerData(plan, i, true, nonce);
            }
        }

        return etaSeconds;
    }

    /**
     * @dev Mechanism to execute a proposal, potentially going through {AccessManager-execute} for delayed operations.
     */
    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 /* descriptionHash */
    ) internal virtual override {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        uint48 etaSeconds = SafeCastUpgradeable.toUint48(proposalEta(proposalId));
        if (block.timestamp < etaSeconds) {
            revert GovernorUnmetDelay(proposalId, etaSeconds);
        }

        ExecutionPlan storage plan = $._executionPlan[proposalId];

        for (uint256 i = 0; i < targets.length; ++i) {
            (bool controlled, bool withDelay, uint32 nonce) = _getManagerData(plan, i);
            if (controlled) {
                uint32 executedNonce = $._manager.execute{value: values[i]}(targets[i], calldatas[i]);
                if (withDelay && executedNonce != nonce) {
                    revert GovernorMismatchedNonce(proposalId, nonce, executedNonce);
                }
            } else {
                (bool success, bytes memory returndata) = targets[i].call{value: values[i]}(calldatas[i]);
                AddressUpgradeable.verifyCallResult(success, returndata);
            }
        }
    }

    /**
     * @dev See {IGovernor-_cancel}
     */
    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal virtual override returns (uint256) {
        GovernorTimelockAccessStorage storage $ = _getGovernorTimelockAccessStorage();
        uint256 proposalId = super._cancel(targets, values, calldatas, descriptionHash);

        uint48 etaSeconds = SafeCastUpgradeable.toUint48(proposalEta(proposalId));

        ExecutionPlan storage plan = $._executionPlan[proposalId];

        // If the proposal has been scheduled it will have an ETA and we may have to externally cancel
        if (etaSeconds != 0) {
            for (uint256 i = 0; i < targets.length; ++i) {
                (, bool withDelay, uint32 nonce) = _getManagerData(plan, i);
                // Only attempt to cancel if the execution plan included a delay
                if (withDelay) {
                    bytes32 operationId = $._manager.hashOperation(address(this), targets[i], calldatas[i]);
                    // Check first if the current operation nonce is the one that we observed previously. It could
                    // already have been cancelled and rescheduled. We don't want to cancel unless it is exactly the
                    // instance that we previously scheduled.
                    if (nonce == $._manager.getNonce(operationId)) {
                        // It is important that all calls have an opportunity to be cancelled. We chose to ignore
                        // potential failures of some of the cancel operations to give the other operations a chance to
                        // be properly cancelled. In particular cancel might fail if the operation was already cancelled
                        // by guardians previously. We don't match on the revert reason to avoid encoding assumptions
                        // about specific errors.
                        try $._manager.cancel(address(this), targets[i], calldatas[i]) {} catch {}
                    }
                }
            }
        }

        return proposalId;
    }

    /**
     * @dev Returns whether the operation at an index is delayed by the manager, and its scheduling nonce once queued.
     */
    function _getManagerData(
        ExecutionPlan storage plan,
        uint256 index
    ) private view returns (bool controlled, bool withDelay, uint32 nonce) {
        (uint256 bucket, uint256 subindex) = _getManagerDataIndices(index);
        uint32 value = plan.managerData[bucket][subindex];
        unchecked {
            return (value > 0, value > 1, value > 1 ? value - 2 : 0);
        }
    }

    /**
     * @dev Marks an operation at an index as permissioned by the manager, potentially delayed, and
     * when delayed sets its scheduling nonce.
     */
    function _setManagerData(ExecutionPlan storage plan, uint256 index, bool withDelay, uint32 nonce) private {
        (uint256 bucket, uint256 subindex) = _getManagerDataIndices(index);
        plan.managerData[bucket][subindex] = withDelay ? nonce + 2 : 1;
    }

    /**
     * @dev Returns bucket and subindex for reading manager data from the packed array mapping.
     */
    function _getManagerDataIndices(uint256 index) private pure returns (uint256 bucket, uint256 subindex) {
        bucket = index >> 3; // index / 8
        subindex = index & 7; // index % 8
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/extensions/GovernorTimelockCompound.sol)

pragma solidity ^0.8.20;

import { IGovernorUpgradeable, GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import { ICompoundTimelockUpgradeable } from "../../vendor/compound/ICompoundTimelockUpgradeable.sol";
import { AddressUpgradeable } from "../../utils/AddressUpgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {Governor} that binds the execution process to a Compound Timelock. This adds a delay, enforced by
 * the external timelock to all successful proposal (in addition to the voting duration). The {Governor} needs to be
 * the admin of the timelock for any operation to be performed. A public, unrestricted,
 * {GovernorTimelockCompound-__acceptAdmin} is available to accept ownership of the timelock.
 *
 * Using this model means the proposal will be operated by the {TimelockController} and not by the {Governor}. Thus,
 * the assets and permissions must be attached to the {TimelockController}. Any asset sent to the {Governor} will be
 * inaccessible.
 */
abstract contract GovernorTimelockCompoundUpgradeable is Initializable, GovernorUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorTimelockCompound
    struct GovernorTimelockCompoundStorage {
        ICompoundTimelockUpgradeable _timelock;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorTimelockCompound")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorTimelockCompoundStorageLocation = 0x7d1501d734d0ca30b8d26751a7fae89646767b24afe11265192d56e5fe515b00;

    function _getGovernorTimelockCompoundStorage() private pure returns (GovernorTimelockCompoundStorage storage $) {
        assembly {
            $.slot := GovernorTimelockCompoundStorageLocation
        }
    }

    /**
     * @dev Emitted when the timelock controller used for proposal execution is modified.
     */
    event TimelockChange(address oldTimelock, address newTimelock);

    /**
     * @dev Set the timelock.
     */
    function __GovernorTimelockCompound_init(ICompoundTimelockUpgradeable timelockAddress) internal onlyInitializing {
        __GovernorTimelockCompound_init_unchained(timelockAddress);
    }

    function __GovernorTimelockCompound_init_unchained(ICompoundTimelockUpgradeable timelockAddress) internal onlyInitializing {
        _updateTimelock(timelockAddress);
    }

    /**
     * @dev Overridden version of the {Governor-state} function with added support for the `Expired` state.
     */
    function state(uint256 proposalId) public view virtual override returns (ProposalState) {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        ProposalState currentState = super.state(proposalId);

        return
            (currentState == ProposalState.Queued &&
                block.timestamp >= proposalEta(proposalId) + $._timelock.GRACE_PERIOD())
                ? ProposalState.Expired
                : currentState;
    }

    /**
     * @dev Public accessor to check the address of the timelock
     */
    function timelock() public view virtual returns (address) {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        return address($._timelock);
    }

    /**
     * @dev See {IGovernor-proposalNeedsQueuing}.
     */
    function proposalNeedsQueuing(uint256) public view virtual override returns (bool) {
        return true;
    }

    /**
     * @dev Function to queue a proposal to the timelock.
     */
    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 /*descriptionHash*/
    ) internal virtual override returns (uint48) {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        uint48 etaSeconds = SafeCastUpgradeable.toUint48(block.timestamp + $._timelock.delay());

        for (uint256 i = 0; i < targets.length; ++i) {
            if (
                $._timelock.queuedTransactions(keccak256(abi.encode(targets[i], values[i], "", calldatas[i], etaSeconds)))
            ) {
                revert GovernorAlreadyQueuedProposal(proposalId);
            }
            $._timelock.queueTransaction(targets[i], values[i], "", calldatas[i], etaSeconds);
        }

        return etaSeconds;
    }

    /**
     * @dev Overridden version of the {Governor-_executeOperations} function that run the already queued proposal
     * through the timelock.
     */
    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 /*descriptionHash*/
    ) internal virtual override {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        uint256 etaSeconds = proposalEta(proposalId);
        if (etaSeconds == 0) {
            revert GovernorNotQueuedProposal(proposalId);
        }
        AddressUpgradeable.sendValue(payable($._timelock), msg.value);
        for (uint256 i = 0; i < targets.length; ++i) {
            $._timelock.executeTransaction(targets[i], values[i], "", calldatas[i], etaSeconds);
        }
    }

    /**
     * @dev Overridden version of the {Governor-_cancel} function to cancel the timelocked proposal if it has already
     * been queued.
     */
    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal virtual override returns (uint256) {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        uint256 proposalId = super._cancel(targets, values, calldatas, descriptionHash);

        uint256 etaSeconds = proposalEta(proposalId);
        if (etaSeconds > 0) {
            // do external call later
            for (uint256 i = 0; i < targets.length; ++i) {
                $._timelock.cancelTransaction(targets[i], values[i], "", calldatas[i], etaSeconds);
            }
        }

        return proposalId;
    }

    /**
     * @dev Address through which the governor executes action. In this case, the timelock.
     */
    function _executor() internal view virtual override returns (address) {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        return address($._timelock);
    }

    /**
     * @dev Accept admin right over the timelock.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    function __acceptAdmin() public {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        $._timelock.acceptAdmin();
    }

    /**
     * @dev Public endpoint to update the underlying timelock instance. Restricted to the timelock itself, so updates
     * must be proposed, scheduled, and executed through governance proposals.
     *
     * For security reasons, the timelock must be handed over to another admin before setting up a new one. The two
     * operations (hand over the timelock) and do the update can be batched in a single proposal.
     *
     * Note that if the timelock admin has been handed over in a previous operation, we refuse updates made through the
     * timelock if admin of the timelock has already been accepted and the operation is executed outside the scope of
     * governance.

     * CAUTION: It is not recommended to change the timelock while there are other queued governance proposals.
     */
    function updateTimelock(ICompoundTimelockUpgradeable newTimelock) external virtual onlyGovernance {
        _updateTimelock(newTimelock);
    }

    function _updateTimelock(ICompoundTimelockUpgradeable newTimelock) private {
        GovernorTimelockCompoundStorage storage $ = _getGovernorTimelockCompoundStorage();
        emit TimelockChange(address($._timelock), address(newTimelock));
        $._timelock = newTimelock;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/extensions/GovernorTimelockControl.sol)

pragma solidity ^0.8.20;

import { IGovernorUpgradeable, GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import { TimelockControllerUpgradeable } from "../TimelockControllerUpgradeable.sol";
import { IERC165Upgradeable } from "../../interfaces/IERC165Upgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {Governor} that binds the execution process to an instance of {TimelockController}. This adds a
 * delay, enforced by the {TimelockController} to all successful proposal (in addition to the voting duration). The
 * {Governor} needs the proposer (and ideally the executor) roles for the {Governor} to work properly.
 *
 * Using this model means the proposal will be operated by the {TimelockController} and not by the {Governor}. Thus,
 * the assets and permissions must be attached to the {TimelockController}. Any asset sent to the {Governor} will be
 * inaccessible from a proposal, unless executed via {Governor-relay}.
 *
 * WARNING: Setting up the TimelockController to have additional proposers or cancellers besides the governor is very
 * risky, as it grants them the ability to: 1) execute operations as the timelock, and thus possibly performing
 * operations or accessing funds that are expected to only be accessible through a vote, and 2) block governance
 * proposals that have been approved by the voters, effectively executing a Denial of Service attack.
 *
 * NOTE: `AccessManager` does not support scheduling more than one operation with the same target and calldata at
 * the same time. See {AccessManager-schedule} for a workaround.
 */
abstract contract GovernorTimelockControlUpgradeable is Initializable, GovernorUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorTimelockControl
    struct GovernorTimelockControlStorage {
        TimelockControllerUpgradeable _timelock;
        mapping(uint256 proposalId => bytes32) _timelockIds;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorTimelockControl")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorTimelockControlStorageLocation = 0x0d5829787b8befdbc6044ef7457d8a95c2a04bc99235349f1a212c063e59d400;

    function _getGovernorTimelockControlStorage() private pure returns (GovernorTimelockControlStorage storage $) {
        assembly {
            $.slot := GovernorTimelockControlStorageLocation
        }
    }

    /**
     * @dev Emitted when the timelock controller used for proposal execution is modified.
     */
    event TimelockChange(address oldTimelock, address newTimelock);

    /**
     * @dev Set the timelock.
     */
    function __GovernorTimelockControl_init(TimelockControllerUpgradeable timelockAddress) internal onlyInitializing {
        __GovernorTimelockControl_init_unchained(timelockAddress);
    }

    function __GovernorTimelockControl_init_unchained(TimelockControllerUpgradeable timelockAddress) internal onlyInitializing {
        _updateTimelock(timelockAddress);
    }

    /**
     * @dev Overridden version of the {Governor-state} function that considers the status reported by the timelock.
     */
    function state(uint256 proposalId) public view virtual override returns (ProposalState) {
        GovernorTimelockControlStorage storage $ = _getGovernorTimelockControlStorage();
        ProposalState currentState = super.state(proposalId);

        if (currentState != ProposalState.Queued) {
            return currentState;
        }

        bytes32 queueid = $._timelockIds[proposalId];
        if ($._timelock.isOperationPending(queueid)) {
            return ProposalState.Queued;
        } else if ($._timelock.isOperationDone(queueid)) {
            // This can happen if the proposal is executed directly on the timelock.
            return ProposalState.Executed;
        } else {
            // This can happen if the proposal is canceled directly on the timelock.
            return ProposalState.Canceled;
        }
    }

    /**
     * @dev Public accessor to check the address of the timelock
     */
    function timelock() public view virtual returns (address) {
        GovernorTimelockControlStorage storage $ = _getGovernorTimelockControlStorage();
        return address($._timelock);
    }

    /**
     * @dev See {IGovernor-proposalNeedsQueuing}.
     */
    function proposalNeedsQueuing(uint256) public view virtual override returns (bool) {
        return true;
    }

    /**
     * @dev Function to queue a proposal to the timelock.
     */
    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal virtual override returns (uint48) {
        GovernorTimelockControlStorage storage $ = _getGovernorTimelockControlStorage();
        uint256 delay = $._timelock.getMinDelay();

        bytes32 salt = _timelockSalt(descriptionHash);
        $._timelockIds[proposalId] = $._timelock.hashOperationBatch(targets, values, calldatas, 0, salt);
        $._timelock.scheduleBatch(targets, values, calldatas, 0, salt, delay);

        return SafeCastUpgradeable.toUint48(block.timestamp + delay);
    }

    /**
     * @dev Overridden version of the {Governor-_executeOperations} function that runs the already queued proposal
     * through the timelock.
     */
    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal virtual override {
        GovernorTimelockControlStorage storage $ = _getGovernorTimelockControlStorage();
        // execute
        $._timelock.executeBatch{value: msg.value}(targets, values, calldatas, 0, _timelockSalt(descriptionHash));
        // cleanup for refund
        delete $._timelockIds[proposalId];
    }

    /**
     * @dev Overridden version of the {Governor-_cancel} function to cancel the timelocked proposal if it has already
     * been queued.
     */
    // This function can reenter through the external call to the timelock, but we assume the timelock is trusted and
    // well behaved (according to TimelockController) and this will not happen.
    // slither-disable-next-line reentrancy-no-eth
    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal virtual override returns (uint256) {
        GovernorTimelockControlStorage storage $ = _getGovernorTimelockControlStorage();
        uint256 proposalId = super._cancel(targets, values, calldatas, descriptionHash);

        bytes32 timelockId = $._timelockIds[proposalId];
        if (timelockId != 0) {
            // cancel
            $._timelock.cancel(timelockId);
            // cleanup
            delete $._timelockIds[proposalId];
        }

        return proposalId;
    }

    /**
     * @dev Address through which the governor executes action. In this case, the timelock.
     */
    function _executor() internal view virtual override returns (address) {
        GovernorTimelockControlStorage storage $ = _getGovernorTimelockControlStorage();
        return address($._timelock);
    }

    /**
     * @dev Public endpoint to update the underlying timelock instance. Restricted to the timelock itself, so updates
     * must be proposed, scheduled, and executed through governance proposals.
     *
     * CAUTION: It is not recommended to change the timelock while there are other queued governance proposals.
     */
    function updateTimelock(TimelockControllerUpgradeable newTimelock) external virtual onlyGovernance {
        _updateTimelock(newTimelock);
    }

    function _updateTimelock(TimelockControllerUpgradeable newTimelock) private {
        GovernorTimelockControlStorage storage $ = _getGovernorTimelockControlStorage();
        emit TimelockChange(address($._timelock), address(newTimelock));
        $._timelock = newTimelock;
    }

    /**
     * @dev Computes the {TimelockController} operation salt.
     *
     * It is computed with the governor address itself to avoid collisions across governor instances using the
     * same timelock.
     */
    function _timelockSalt(bytes32 descriptionHash) private view returns (bytes32) {
        return bytes20(address(this)) ^ descriptionHash;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/extensions/GovernorVotesQuorumFraction.sol)

pragma solidity ^0.8.20;

import { GovernorVotesUpgradeable } from "./GovernorVotesUpgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import { CheckpointsUpgradeable } from "../../utils/structs/CheckpointsUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {Governor} for voting weight extraction from an {ERC20Votes} token and a quorum expressed as a
 * fraction of the total supply.
 */
abstract contract GovernorVotesQuorumFractionUpgradeable is Initializable, GovernorVotesUpgradeable {
    using CheckpointsUpgradeable for CheckpointsUpgradeable.Trace208;

    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorVotesQuorumFraction
    struct GovernorVotesQuorumFractionStorage {
        CheckpointsUpgradeable.Trace208 _quorumNumeratorHistory;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorVotesQuorumFraction")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorVotesQuorumFractionStorageLocation = 0xe770710421fd2cad75ad828c61aa98f2d77d423a440b67872d0f65554148e000;

    function _getGovernorVotesQuorumFractionStorage() private pure returns (GovernorVotesQuorumFractionStorage storage $) {
        assembly {
            $.slot := GovernorVotesQuorumFractionStorageLocation
        }
    }

    event QuorumNumeratorUpdated(uint256 oldQuorumNumerator, uint256 newQuorumNumerator);

    /**
     * @dev The quorum set is not a valid fraction.
     */
    error GovernorInvalidQuorumFraction(uint256 quorumNumerator, uint256 quorumDenominator);

    /**
     * @dev Initialize quorum as a fraction of the token's total supply.
     *
     * The fraction is specified as `numerator / denominator`. By default the denominator is 100, so quorum is
     * specified as a percent: a numerator of 10 corresponds to quorum being 10% of total supply. The denominator can be
     * customized by overriding {quorumDenominator}.
     */
    function __GovernorVotesQuorumFraction_init(uint256 quorumNumeratorValue) internal onlyInitializing {
        __GovernorVotesQuorumFraction_init_unchained(quorumNumeratorValue);
    }

    function __GovernorVotesQuorumFraction_init_unchained(uint256 quorumNumeratorValue) internal onlyInitializing {
        _updateQuorumNumerator(quorumNumeratorValue);
    }

    /**
     * @dev Returns the current quorum numerator. See {quorumDenominator}.
     */
    function quorumNumerator() public view virtual returns (uint256) {
        GovernorVotesQuorumFractionStorage storage $ = _getGovernorVotesQuorumFractionStorage();
        return $._quorumNumeratorHistory.latest();
    }

    /**
     * @dev Returns the quorum numerator at a specific timepoint. See {quorumDenominator}.
     */
    function quorumNumerator(uint256 timepoint) public view virtual returns (uint256) {
        GovernorVotesQuorumFractionStorage storage $ = _getGovernorVotesQuorumFractionStorage();
        uint256 length = $._quorumNumeratorHistory._checkpoints.length;

        // Optimistic search, check the latest checkpoint
        CheckpointsUpgradeable.Checkpoint208 storage latest = $._quorumNumeratorHistory._checkpoints[length - 1];
        uint48 latestKey = latest._key;
        uint208 latestValue = latest._value;
        if (latestKey <= timepoint) {
            return latestValue;
        }

        // Otherwise, do the binary search
        return $._quorumNumeratorHistory.upperLookupRecent(SafeCastUpgradeable.toUint48(timepoint));
    }

    /**
     * @dev Returns the quorum denominator. Defaults to 100, but may be overridden.
     */
    function quorumDenominator() public view virtual returns (uint256) {
        return 100;
    }

    /**
     * @dev Returns the quorum for a timepoint, in terms of number of votes: `supply * numerator / denominator`.
     */
    function quorum(uint256 timepoint) public view virtual override returns (uint256) {
        return (token().getPastTotalSupply(timepoint) * quorumNumerator(timepoint)) / quorumDenominator();
    }

    /**
     * @dev Changes the quorum numerator.
     *
     * Emits a {QuorumNumeratorUpdated} event.
     *
     * Requirements:
     *
     * - Must be called through a governance proposal.
     * - New numerator must be smaller or equal to the denominator.
     */
    function updateQuorumNumerator(uint256 newQuorumNumerator) external virtual onlyGovernance {
        _updateQuorumNumerator(newQuorumNumerator);
    }

    /**
     * @dev Changes the quorum numerator.
     *
     * Emits a {QuorumNumeratorUpdated} event.
     *
     * Requirements:
     *
     * - New numerator must be smaller or equal to the denominator.
     */
    function _updateQuorumNumerator(uint256 newQuorumNumerator) internal virtual {
        GovernorVotesQuorumFractionStorage storage $ = _getGovernorVotesQuorumFractionStorage();
        uint256 denominator = quorumDenominator();
        if (newQuorumNumerator > denominator) {
            revert GovernorInvalidQuorumFraction(newQuorumNumerator, denominator);
        }

        uint256 oldQuorumNumerator = quorumNumerator();
        $._quorumNumeratorHistory.push(clock(), SafeCastUpgradeable.toUint208(newQuorumNumerator));

        emit QuorumNumeratorUpdated(oldQuorumNumerator, newQuorumNumerator);
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/extensions/GovernorVotes.sol)

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../GovernorUpgradeable.sol";
import { IVotesUpgradeable } from "../utils/IVotesUpgradeable.sol";
import { IERC5805Upgradeable } from "../../interfaces/IERC5805Upgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import { TimeUpgradeable } from "../../utils/types/TimeUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {Governor} for voting weight extraction from an {ERC20Votes} token, or since v4.5 an {ERC721Votes}
 * token.
 */
abstract contract GovernorVotesUpgradeable is Initializable, GovernorUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.GovernorVotes
    struct GovernorVotesStorage {
        IERC5805Upgradeable _token;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.GovernorVotes")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant GovernorVotesStorageLocation = 0x3ba4977254e415696610a40ebf2258dbfa0ec6a2ff64e84bfe715ff16977cc00;

    function _getGovernorVotesStorage() private pure returns (GovernorVotesStorage storage $) {
        assembly {
            $.slot := GovernorVotesStorageLocation
        }
    }

    function __GovernorVotes_init(IVotesUpgradeable tokenAddress) internal onlyInitializing {
        __GovernorVotes_init_unchained(tokenAddress);
    }

    function __GovernorVotes_init_unchained(IVotesUpgradeable tokenAddress) internal onlyInitializing {
        GovernorVotesStorage storage $ = _getGovernorVotesStorage();
        $._token = IERC5805Upgradeable(address(tokenAddress));
    }

    /**
     * @dev The token that voting power is sourced from.
     */
    function token() public view virtual returns (IERC5805Upgradeable) {
        GovernorVotesStorage storage $ = _getGovernorVotesStorage();
        return $._token;
    }

    /**
     * @dev Clock (as specified in EIP-6372) is set to match the token's clock. Fallback to block numbers if the token
     * does not implement EIP-6372.
     */
    function clock() public view virtual override returns (uint48) {
        try token().clock() returns (uint48 timepoint) {
            return timepoint;
        } catch {
            return TimeUpgradeable.blockNumber();
        }
    }

    /**
     * @dev Machine-readable description of the clock as specified in EIP-6372.
     */
    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() public view virtual override returns (string memory) {
        try token().CLOCK_MODE() returns (string memory clockmode) {
            return clockmode;
        } catch {
            return "mode=blocknumber&from=default";
        }
    }

    /**
     * Read the voting weight from the token's built in snapshot mechanism (see {Governor-_getVotes}).
     */
    function _getVotes(
        address account,
        uint256 timepoint,
        bytes memory /*params*/
    ) internal view virtual override returns (uint256) {
        return token().getPastVotes(account, timepoint);
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/utils/IVotes.sol)
pragma solidity ^0.8.20;

/**
 * @dev Common interface for {ERC20Votes}, {ERC721Votes}, and other {Votes}-enabled contracts.
 */
interface IVotesUpgradeable {
    /**
     * @dev The signature used has expired.
     */
    error VotesExpiredSignature(uint256 expiry);

    /**
     * @dev Emitted when an account changes their delegate.
     */
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /**
     * @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of voting units.
     */
    event DelegateVotesChanged(address indexed delegate, uint256 previousVotes, uint256 newVotes);

    /**
     * @dev Returns the current amount of votes that `account` has.
     */
    function getVotes(address account) external view returns (uint256);

    /**
     * @dev Returns the amount of votes that `account` had at a specific moment in the past. If the `clock()` is
     * configured to use block numbers, this will return the value at the end of the corresponding block.
     */
    function getPastVotes(address account, uint256 timepoint) external view returns (uint256);

    /**
     * @dev Returns the total supply of votes available at a specific moment in the past. If the `clock()` is
     * configured to use block numbers, this will return the value at the end of the corresponding block.
     *
     * NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.
     * Votes that have not been delegated are still part of total supply, even though they would not participate in a
     * vote.
     */
    function getPastTotalSupply(uint256 timepoint) external view returns (uint256);

    /**
     * @dev Returns the delegate that `account` has chosen.
     */
    function delegates(address account) external view returns (address);

    /**
     * @dev Delegates votes from the sender to `delegatee`.
     */
    function delegate(address delegatee) external;

    /**
     * @dev Delegates votes from signer to `delegatee`.
     */
    function delegateBySig(address delegatee, uint256 nonce, uint256 expiry, uint8 v, bytes32 r, bytes32 s) external;
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (governance/utils/Votes.sol)
pragma solidity ^0.8.20;

import { IERC5805Upgradeable } from "../../interfaces/IERC5805Upgradeable.sol";
import { ContextUpgradeable } from "../../utils/ContextUpgradeable.sol";
import { NoncesUpgradeable } from "../../utils/NoncesUpgradeable.sol";
import { EIP712Upgradeable } from "../../utils/cryptography/EIP712Upgradeable.sol";
import { CheckpointsUpgradeable } from "../../utils/structs/CheckpointsUpgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import { ECDSAUpgradeable } from "../../utils/cryptography/ECDSAUpgradeable.sol";
import { TimeUpgradeable } from "../../utils/types/TimeUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev This is a base abstract contract that tracks voting units, which are a measure of voting power that can be
 * transferred, and provides a system of vote delegation, where an account can delegate its voting units to a sort of
 * "representative" that will pool delegated voting units from different accounts and can then use it to vote in
 * decisions. In fact, voting units _must_ be delegated in order to count as actual votes, and an account has to
 * delegate those votes to itself if it wishes to participate in decisions and does not have a trusted representative.
 *
 * This contract is often combined with a token contract such that voting units correspond to token units. For an
 * example, see {ERC721Votes}.
 *
 * The full history of delegate votes is tracked on-chain so that governance protocols can consider votes as distributed
 * at a particular block number to protect against flash loans and double voting. The opt-in delegate system makes the
 * cost of this history tracking optional.
 *
 * When using this module the derived contract must implement {_getVotingUnits} (for example, make it return
 * {ERC721-balanceOf}), and can use {_transferVotingUnits} to track a change in the distribution of those units (in the
 * previous example, it would be included in {ERC721-_beforeTokenTransfer}).
 */
abstract contract VotesUpgradeable is Initializable, ContextUpgradeable, EIP712Upgradeable, NoncesUpgradeable, IERC5805Upgradeable {
    using CheckpointsUpgradeable for CheckpointsUpgradeable.Trace208;

    bytes32 private constant DELEGATION_TYPEHASH =
        keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @custom:storage-location erc7201:openzeppelin.storage.Votes
    struct VotesStorage {
        mapping(address account => address) _delegatee;

        mapping(address delegatee => CheckpointsUpgradeable.Trace208) _delegateCheckpoints;

        CheckpointsUpgradeable.Trace208 _totalCheckpoints;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Votes")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant VotesStorageLocation = 0xe8b26c30fad74198956032a3533d903385d56dd795af560196f9c78d4af40d00;

    function _getVotesStorage() private pure returns (VotesStorage storage $) {
        assembly {
            $.slot := VotesStorageLocation
        }
    }

    /**
     * @dev The clock was incorrectly modified.
     */
    error ERC6372InconsistentClock();

    /**
     * @dev Lookup to future votes is not available.
     */
    error ERC5805FutureLookup(uint256 timepoint, uint48 clock);

    function __Votes_init() internal onlyInitializing {
    }

    function __Votes_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Clock used for flagging checkpoints. Can be overridden to implement timestamp based
     * checkpoints (and voting), in which case {CLOCK_MODE} should be overridden as well to match.
     */
    function clock() public view virtual returns (uint48) {
        return TimeUpgradeable.blockNumber();
    }

    /**
     * @dev Machine-readable description of the clock as specified in EIP-6372.
     */
    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() public view virtual returns (string memory) {
        // Check that the clock was not modified
        if (clock() != TimeUpgradeable.blockNumber()) {
            revert ERC6372InconsistentClock();
        }
        return "mode=blocknumber&from=default";
    }

    /**
     * @dev Returns the current amount of votes that `account` has.
     */
    function getVotes(address account) public view virtual returns (uint256) {
        VotesStorage storage $ = _getVotesStorage();
        return $._delegateCheckpoints[account].latest();
    }

    /**
     * @dev Returns the amount of votes that `account` had at a specific moment in the past. If the `clock()` is
     * configured to use block numbers, this will return the value at the end of the corresponding block.
     *
     * Requirements:
     *
     * - `timepoint` must be in the past. If operating using block numbers, the block must be already mined.
     */
    function getPastVotes(address account, uint256 timepoint) public view virtual returns (uint256) {
        VotesStorage storage $ = _getVotesStorage();
        uint48 currentTimepoint = clock();
        if (timepoint >= currentTimepoint) {
            revert ERC5805FutureLookup(timepoint, currentTimepoint);
        }
        return $._delegateCheckpoints[account].upperLookupRecent(SafeCastUpgradeable.toUint48(timepoint));
    }

    /**
     * @dev Returns the total supply of votes available at a specific moment in the past. If the `clock()` is
     * configured to use block numbers, this will return the value at the end of the corresponding block.
     *
     * NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.
     * Votes that have not been delegated are still part of total supply, even though they would not participate in a
     * vote.
     *
     * Requirements:
     *
     * - `timepoint` must be in the past. If operating using block numbers, the block must be already mined.
     */
    function getPastTotalSupply(uint256 timepoint) public view virtual returns (uint256) {
        VotesStorage storage $ = _getVotesStorage();
        uint48 currentTimepoint = clock();
        if (timepoint >= currentTimepoint) {
            revert ERC5805FutureLookup(timepoint, currentTimepoint);
        }
        return $._totalCheckpoints.upperLookupRecent(SafeCastUpgradeable.toUint48(timepoint));
    }

    /**
     * @dev Returns the current total supply of votes.
     */
    function _getTotalSupply() internal view virtual returns (uint256) {
        VotesStorage storage $ = _getVotesStorage();
        return $._totalCheckpoints.latest();
    }

    /**
     * @dev Returns the delegate that `account` has chosen.
     */
    function delegates(address account) public view virtual returns (address) {
        VotesStorage storage $ = _getVotesStorage();
        return $._delegatee[account];
    }

    /**
     * @dev Delegates votes from the sender to `delegatee`.
     */
    function delegate(address delegatee) public virtual {
        address account = _msgSender();
        _delegate(account, delegatee);
    }

    /**
     * @dev Delegates votes from signer to `delegatee`.
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > expiry) {
            revert VotesExpiredSignature(expiry);
        }
        address signer = ECDSAUpgradeable.recover(
            _hashTypedDataV4(keccak256(abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry))),
            v,
            r,
            s
        );
        _useCheckedNonce(signer, nonce);
        _delegate(signer, delegatee);
    }

    /**
     * @dev Delegate all of `account`'s voting units to `delegatee`.
     *
     * Emits events {IVotes-DelegateChanged} and {IVotes-DelegateVotesChanged}.
     */
    function _delegate(address account, address delegatee) internal virtual {
        VotesStorage storage $ = _getVotesStorage();
        address oldDelegate = delegates(account);
        $._delegatee[account] = delegatee;

        emit DelegateChanged(account, oldDelegate, delegatee);
        _moveDelegateVotes(oldDelegate, delegatee, _getVotingUnits(account));
    }

    /**
     * @dev Transfers, mints, or burns voting units. To register a mint, `from` should be zero. To register a burn, `to`
     * should be zero. Total supply of voting units will be adjusted with mints and burns.
     */
    function _transferVotingUnits(address from, address to, uint256 amount) internal virtual {
        VotesStorage storage $ = _getVotesStorage();
        if (from == address(0)) {
            _push($._totalCheckpoints, _add, SafeCastUpgradeable.toUint208(amount));
        }
        if (to == address(0)) {
            _push($._totalCheckpoints, _subtract, SafeCastUpgradeable.toUint208(amount));
        }
        _moveDelegateVotes(delegates(from), delegates(to), amount);
    }

    /**
     * @dev Moves delegated votes from one delegate to another.
     */
    function _moveDelegateVotes(address from, address to, uint256 amount) private {
        VotesStorage storage $ = _getVotesStorage();
        if (from != to && amount > 0) {
            if (from != address(0)) {
                (uint256 oldValue, uint256 newValue) = _push(
                    $._delegateCheckpoints[from],
                    _subtract,
                    SafeCastUpgradeable.toUint208(amount)
                );
                emit DelegateVotesChanged(from, oldValue, newValue);
            }
            if (to != address(0)) {
                (uint256 oldValue, uint256 newValue) = _push(
                    $._delegateCheckpoints[to],
                    _add,
                    SafeCastUpgradeable.toUint208(amount)
                );
                emit DelegateVotesChanged(to, oldValue, newValue);
            }
        }
    }

    /**
     * @dev Get number of checkpoints for `account`.
     */
    function _numCheckpoints(address account) internal view virtual returns (uint32) {
        VotesStorage storage $ = _getVotesStorage();
        return SafeCastUpgradeable.toUint32($._delegateCheckpoints[account].length());
    }

    /**
     * @dev Get the `pos`-th checkpoint for `account`.
     */
    function _checkpoints(
        address account,
        uint32 pos
    ) internal view virtual returns (CheckpointsUpgradeable.Checkpoint208 memory) {
        VotesStorage storage $ = _getVotesStorage();
        return $._delegateCheckpoints[account].at(pos);
    }

    function _push(
        CheckpointsUpgradeable.Trace208 storage store,
        function(uint208, uint208) view returns (uint208) op,
        uint208 delta
    ) private returns (uint208, uint208) {
        return store.push(clock(), op(store.latest(), delta));
    }

    function _add(uint208 a, uint208 b) private pure returns (uint208) {
        return a + b;
    }

    function _subtract(uint208 a, uint208 b) private pure returns (uint208) {
        return a - b;
    }

    /**
     * @dev Must return the voting units held by an account.
     */
    function _getVotingUnits(address) internal view virtual returns (uint256);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1155MetadataURI.sol)

pragma solidity ^0.8.20;

import { IERC1155MetadataURIUpgradeable } from "../token/ERC1155/extensions/IERC1155MetadataURIUpgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import { IERC1155ReceiverUpgradeable } from "../token/ERC1155/IERC1155ReceiverUpgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1155.sol)

pragma solidity ^0.8.20;

import { IERC1155Upgradeable } from "../token/ERC1155/IERC1155Upgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1271.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271Upgradeable {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1363Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for any contract that wants to support {IERC1363-transferAndCall}
 * or {IERC1363-transferFromAndCall} from {ERC1363} token contracts.
 */
interface IERC1363ReceiverUpgradeable {
    /*
     * Note: the ERC-165 identifier for this interface is 0x88a7ca5c.
     * 0x88a7ca5c === bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))
     */

    /**
     * @notice Handle the receipt of ERC1363 tokens
     * @dev Any ERC1363 smart contract calls this function on the recipient
     * after a `transfer` or a `transferFrom`. This function MAY throw to revert and reject the
     * transfer. Return of other than the magic value MUST result in the
     * transaction being reverted.
     * Note: the token contract address is always the message sender.
     * @param operator address The address which called `transferAndCall` or `transferFromAndCall` function
     * @param from address The address which are token transferred from
     * @param amount uint256 The amount of tokens transferred
     * @param data bytes Additional data with no specified format
     * @return `bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))` unless throwing
     */
    function onTransferReceived(
        address operator,
        address from,
        uint256 amount,
        bytes memory data
    ) external returns (bytes4);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1363Spender.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for any contract that wants to support {IERC1363-approveAndCall}
 * from {ERC1363} token contracts.
 */
interface IERC1363SpenderUpgradeable {
    /*
     * Note: the ERC-165 identifier for this interface is 0x7b04a2d0.
     * 0x7b04a2d0 === bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))
     */

    /**
     * @notice Handle the approval of ERC1363 tokens
     * @dev Any ERC1363 smart contract calls this function on the recipient
     * after an `approve`. This function MAY throw to revert and reject the
     * approval. Return of other than the magic value MUST result in the
     * transaction being reverted.
     * Note: the token contract address is always the message sender.
     * @param owner address The address which called `approveAndCall` function
     * @param amount uint256 The amount of tokens to be spent
     * @param data bytes Additional data with no specified format
     * @return `bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))`unless throwing
     */
    function onApprovalReceived(address owner, uint256 amount, bytes memory data) external returns (bytes4);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1363.sol)

pragma solidity ^0.8.20;

import { IERC20Upgradeable } from "./IERC20Upgradeable.sol";
import { IERC165Upgradeable } from "./IERC165Upgradeable.sol";

/**
 * @dev Interface of an ERC1363 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1363[EIP].
 *
 * Defines a interface for ERC20 tokens that supports executing recipient
 * code after `transfer` or `transferFrom`, or spender code after `approve`.
 */
interface IERC1363Upgradeable is IERC165Upgradeable, IERC20Upgradeable {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
     * @param to address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @return true unless throwing
     */
    function transferAndCall(address to, uint256 amount) external returns (bool);

    /**
     * @dev Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
     * @param to address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @param data bytes Additional data with no specified format, sent in call to `to`
     * @return true unless throwing
     */
    function transferAndCall(address to, uint256 amount, bytes memory data) external returns (bool);

    /**
     * @dev Transfer tokens from one address to another and then call `onTransferReceived` on receiver
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @return true unless throwing
     */
    function transferFromAndCall(address from, address to, uint256 amount) external returns (bool);

    /**
     * @dev Transfer tokens from one address to another and then call `onTransferReceived` on receiver
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param amount uint256 The amount of tokens to be transferred
     * @param data bytes Additional data with no specified format, sent in call to `to`
     * @return true unless throwing
     */
    function transferFromAndCall(address from, address to, uint256 amount, bytes memory data) external returns (bool);

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
     * and then call `onApprovalReceived` on spender.
     * @param spender address The address which will spend the funds
     * @param amount uint256 The amount of tokens to be spent
     */
    function approveAndCall(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
     * and then call `onApprovalReceived` on spender.
     * @param spender address The address which will spend the funds
     * @param amount uint256 The amount of tokens to be spent
     * @param data bytes Additional data with no specified format, sent in call to `spender`
     */
    function approveAndCall(address spender, uint256 amount, bytes memory data) external returns (bool);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../utils/introspection/IERC165Upgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC1820Implementer.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for an ERC1820 implementer, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1820#interface-implementation-erc1820implementerinterface[EIP].
 * Used by contracts that will be registered as implementers in the
 * {IERC1820Registry}.
 */
interface IERC1820ImplementerUpgradeable {
    /**
     * @dev Returns a special value (`ERC1820_ACCEPT_MAGIC`) if this contract
     * implements `interfaceHash` for `account`.
     *
     * See {IERC1820Registry-setInterfaceImplementer}.
     */
    function canImplementInterfaceForAddress(bytes32 interfaceHash, address account) external view returns (bytes32);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/introspection/IERC1820Registry.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the global ERC1820 Registry, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1820[EIP]. Accounts may register
 * implementers for interfaces in this registry, as well as query support.
 *
 * Implementers may be shared by multiple accounts, and can also implement more
 * than a single interface for each account. Contracts can implement interfaces
 * for themselves, but externally-owned accounts (EOA) must delegate this to a
 * contract.
 *
 * {IERC165} interfaces can also be queried via the registry.
 *
 * For an in-depth explanation and source code analysis, see the EIP text.
 */
interface IERC1820RegistryUpgradeable {
    event InterfaceImplementerSet(address indexed account, bytes32 indexed interfaceHash, address indexed implementer);

    event ManagerChanged(address indexed account, address indexed newManager);

    /**
     * @dev Sets `newManager` as the manager for `account`. A manager of an
     * account is able to set interface implementers for it.
     *
     * By default, each account is its own manager. Passing a value of `0x0` in
     * `newManager` will reset the manager to this initial state.
     *
     * Emits a {ManagerChanged} event.
     *
     * Requirements:
     *
     * - the caller must be the current manager for `account`.
     */
    function setManager(address account, address newManager) external;

    /**
     * @dev Returns the manager for `account`.
     *
     * See {setManager}.
     */
    function getManager(address account) external view returns (address);

    /**
     * @dev Sets the `implementer` contract as ``account``'s implementer for
     * `interfaceHash`.
     *
     * `account` being the zero address is an alias for the caller's address.
     * The zero address can also be used in `implementer` to remove an old one.
     *
     * See {interfaceHash} to learn how these are created.
     *
     * Emits an {InterfaceImplementerSet} event.
     *
     * Requirements:
     *
     * - the caller must be the current manager for `account`.
     * - `interfaceHash` must not be an {IERC165} interface id (i.e. it must not
     * end in 28 zeroes).
     * - `implementer` must implement {IERC1820Implementer} and return true when
     * queried for support, unless `implementer` is the caller. See
     * {IERC1820Implementer-canImplementInterfaceForAddress}.
     */
    function setInterfaceImplementer(address account, bytes32 _interfaceHash, address implementer) external;

    /**
     * @dev Returns the implementer of `interfaceHash` for `account`. If no such
     * implementer is registered, returns the zero address.
     *
     * If `interfaceHash` is an {IERC165} interface id (i.e. it ends with 28
     * zeroes), `account` will be queried for support of it.
     *
     * `account` being the zero address is an alias for the caller's address.
     */
    function getInterfaceImplementer(address account, bytes32 _interfaceHash) external view returns (address);

    /**
     * @dev Returns the interface hash for an `interfaceName`, as defined in the
     * corresponding
     * https://eips.ethereum.org/EIPS/eip-1820#interface-name[section of the EIP].
     */
    function interfaceHash(string calldata interfaceName) external pure returns (bytes32);

    /**
     * @notice Updates the cache with whether the contract implements an ERC165 interface or not.
     * @param account Address of the contract for which to update the cache.
     * @param interfaceId ERC165 interface for which to update the cache.
     */
    function updateERC165Cache(address account, bytes4 interfaceId) external;

    /**
     * @notice Checks whether a contract implements an ERC165 interface or not.
     * If the result is not cached a direct lookup on the contract address is performed.
     * If the result is not cached or the cached value is out-of-date, the cache MUST be updated manually by calling
     * {updateERC165Cache} with the contract address.
     * @param account Address of the contract to check.
     * @param interfaceId ERC165 interface to check.
     * @return True if `account` implements `interfaceId`, false otherwise.
     */
    function implementsERC165Interface(address account, bytes4 interfaceId) external view returns (bool);

    /**
     * @notice Checks whether a contract implements an ERC165 interface or not without using or updating the cache.
     * @param account Address of the contract to check.
     * @param interfaceId ERC165 interface to check.
     * @return True if `account` implements `interfaceId`, false otherwise.
     */
    function implementsERC165InterfaceNoCache(address account, bytes4 interfaceId) external view returns (bool);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1967.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 */
interface IERC1967Upgradeable {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import { IERC20MetadataUpgradeable } from "../token/ERC20/extensions/IERC20MetadataUpgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import { IERC20Upgradeable } from "../token/ERC20/IERC20Upgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (interfaces/IERC2309.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC-2309: ERC-721 Consecutive Transfer Extension.
 */
interface IERC2309Upgradeable {
    /**
     * @dev Emitted when the tokens from `fromTokenId` to `toTokenId` are transferred from `fromAddress` to `toAddress`.
     */
    event ConsecutiveTransfer(
        uint256 indexed fromTokenId,
        uint256 toTokenId,
        address indexed fromAddress,
        address indexed toAddress
    );
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC2612.sol)

pragma solidity ^0.8.20;

import { IERC20PermitUpgradeable } from "../token/ERC20/extensions/IERC20PermitUpgradeable.sol";

interface IERC2612Upgradeable is IERC20PermitUpgradeable {}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../utils/introspection/IERC165Upgradeable.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 */
interface IERC2981Upgradeable is IERC165Upgradeable {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(
        uint256 tokenId,
        uint256 salePrice
    ) external view returns (address receiver, uint256 royaltyAmount);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC3156FlashBorrower.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC3156 FlashBorrower, as defined in
 * https://eips.ethereum.org/EIPS/eip-3156[ERC-3156].
 */
interface IERC3156FlashBorrowerUpgradeable {
    /**
     * @dev Receive a flash loan.
     * @param initiator The initiator of the loan.
     * @param token The loan currency.
     * @param amount The amount of tokens lent.
     * @param fee The additional amount of tokens to repay.
     * @param data Arbitrary data structure, intended to contain user-defined parameters.
     * @return The keccak256 hash of "ERC3156FlashBorrower.onFlashLoan"
     */
    function onFlashLoan(
        address initiator,
        address token,
        uint256 amount,
        uint256 fee,
        bytes calldata data
    ) external returns (bytes32);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC3156FlashLender.sol)

pragma solidity ^0.8.20;

import { IERC3156FlashBorrowerUpgradeable } from "./IERC3156FlashBorrowerUpgradeable.sol";

/**
 * @dev Interface of the ERC3156 FlashLender, as defined in
 * https://eips.ethereum.org/EIPS/eip-3156[ERC-3156].
 */
interface IERC3156FlashLenderUpgradeable {
    /**
     * @dev The amount of currency available to be lended.
     * @param token The loan currency.
     * @return The amount of `token` that can be borrowed.
     */
    function maxFlashLoan(address token) external view returns (uint256);

    /**
     * @dev The fee to be charged for a given loan.
     * @param token The loan currency.
     * @param amount The amount of tokens lent.
     * @return The amount of `token` to be charged for the loan, on top of the returned principal.
     */
    function flashFee(address token, uint256 amount) external view returns (uint256);

    /**
     * @dev Initiate a flash loan.
     * @param receiver The receiver of the tokens in the loan, and the receiver of the callback.
     * @param token The loan currency.
     * @param amount The amount of tokens lent.
     * @param data Arbitrary data structure, intended to contain user-defined parameters.
     */
    function flashLoan(
        IERC3156FlashBorrowerUpgradeable receiver,
        address token,
        uint256 amount,
        bytes calldata data
    ) external returns (bool);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC3156.sol)

pragma solidity ^0.8.20;

import { IERC3156FlashBorrowerUpgradeable } from "./IERC3156FlashBorrowerUpgradeable.sol";
import { IERC3156FlashLenderUpgradeable } from "./IERC3156FlashLenderUpgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import { IERC20Upgradeable } from "../token/ERC20/IERC20Upgradeable.sol";
import { IERC20MetadataUpgradeable } from "../token/ERC20/extensions/IERC20MetadataUpgradeable.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626Upgradeable is IERC20Upgradeable, IERC20MetadataUpgradeable {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4906.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "./IERC165Upgradeable.sol";
import { IERC721Upgradeable } from "./IERC721Upgradeable.sol";

/// @title EIP-721 Metadata Update Extension
interface IERC4906Upgradeable is IERC165Upgradeable, IERC721Upgradeable {
    /// @dev This event emits when the metadata of a token is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFT.
    event MetadataUpdate(uint256 _tokenId);

    /// @dev This event emits when the metadata of a range of tokens is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFTs.
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267Upgradeable {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5313.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for the Light Contract Ownership Standard.
 *
 * A standardized minimal interface required to identify an account that controls a contract
 */
interface IERC5313Upgradeable {
    /**
     * @dev Gets the address of the owner.
     */
    function owner() external view returns (address);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5805.sol)

pragma solidity ^0.8.20;

import { IVotesUpgradeable } from "../governance/utils/IVotesUpgradeable.sol";
import { IERC6372Upgradeable } from "./IERC6372Upgradeable.sol";

interface IERC5805Upgradeable is IERC6372Upgradeable, IVotesUpgradeable {}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC6372.sol)

pragma solidity ^0.8.20;

interface IERC6372Upgradeable {
    /**
     * @dev Clock used for flagging checkpoints. Can be overridden to implement timestamp based checkpoints (and voting).
     */
    function clock() external view returns (uint48);

    /**
     * @dev Description of the clock
     */
    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() external view returns (string memory);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721Enumerable.sol)

pragma solidity ^0.8.20;

import { IERC721EnumerableUpgradeable } from "../token/ERC721/extensions/IERC721EnumerableUpgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import { IERC721MetadataUpgradeable } from "../token/ERC721/extensions/IERC721MetadataUpgradeable.sol";


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721Receiver.sol)

pragma solidity ^0.8.20;

import { IERC721ReceiverUpgradeable } from "../token/ERC721/IERC721ReceiverUpgradeable.sol";


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC777TokensRecipient standard as defined in the EIP.
 *
 * Accounts can be notified of {IERC777} tokens being sent to them by having a
 * contract implement this interface (contract holders can be their own
 * implementer) and registering it on the
 * https://eips.ethereum.org/EIPS/eip-1820[ERC1820 global registry].
 *
 * See {IERC1820Registry} and {IERC1820Implementer}.
 */
interface IERC777RecipientUpgradeable {
    /**
     * @dev Called by an {IERC777} token contract whenever tokens are being
     * moved or created into a registered account (`to`). The type of operation
     * is conveyed by `from` being the zero address or not.
     *
     * This call occurs _after_ the token contract's state is updated, so
     * {IERC777-balanceOf}, etc., can be used to query the post-operation state.
     *
     * This function may revert to prevent the operation from being executed.
     */
    function tokensReceived(
        address operator,
        address from,
        address to,
        uint256 amount,
        bytes calldata userData,
        bytes calldata operatorData
    ) external;
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC777TokensSender standard as defined in the EIP.
 *
 * {IERC777} Token holders can be notified of operations performed on their
 * tokens by having a contract implement this interface (contract holders can be
 * their own implementer) and registering it on the
 * https://eips.ethereum.org/EIPS/eip-1820[ERC1820 global registry].
 *
 * See {IERC1820Registry} and {IERC1820Implementer}.
 */
interface IERC777SenderUpgradeable {
    /**
     * @dev Called by an {IERC777} token contract whenever a registered holder's
     * (`from`) tokens are about to be moved or destroyed. The type of operation
     * is conveyed by `to` being the zero address or not.
     *
     * This call occurs _before_ the token contract's state is updated, so
     * {IERC777-balanceOf}, etc., can be used to query the pre-operation state.
     *
     * This function may revert to prevent the operation from being executed.
     */
    function tokensToSend(
        address operator,
        address from,
        address to,
        uint256 amount,
        bytes calldata userData,
        bytes calldata operatorData
    ) external;
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC777Token standard as defined in the EIP.
 *
 * This contract uses the
 * https://eips.ethereum.org/EIPS/eip-1820[ERC1820 registry standard] to let
 * token holders and recipients react to token movements by using setting implementers
 * for the associated interfaces in said registry. See {IERC1820Registry} and
 * {IERC1820Implementer}.
 */
interface IERC777Upgradeable {
    /**
     * @dev Emitted when `amount` tokens are created by `operator` and assigned to `to`.
     *
     * Note that some additional user `data` and `operatorData` can be logged in the event.
     */
    event Minted(address indexed operator, address indexed to, uint256 amount, bytes data, bytes operatorData);

    /**
     * @dev Emitted when `operator` destroys `amount` tokens from `account`.
     *
     * Note that some additional user `data` and `operatorData` can be logged in the event.
     */
    event Burned(address indexed operator, address indexed from, uint256 amount, bytes data, bytes operatorData);

    /**
     * @dev Emitted when `operator` is made operator for `tokenHolder`.
     */
    event AuthorizedOperator(address indexed operator, address indexed tokenHolder);

    /**
     * @dev Emitted when `operator` is revoked its operator status for `tokenHolder`.
     */
    event RevokedOperator(address indexed operator, address indexed tokenHolder);

    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the smallest part of the token that is not divisible. This
     * means all token operations (creation, movement and destruction) must have
     * amounts that are a multiple of this number.
     *
     * For most token contracts, this value will equal 1.
     */
    function granularity() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by an account (`owner`).
     */
    function balanceOf(address owner) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * If send or receive hooks are registered for the caller and `recipient`,
     * the corresponding functions will be called with `data` and empty
     * `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * Emits a {Sent} event.
     *
     * Requirements
     *
     * - the caller must have at least `amount` tokens.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function send(address recipient, uint256 amount, bytes calldata data) external;

    /**
     * @dev Destroys `amount` tokens from the caller's account, reducing the
     * total supply.
     *
     * If a send hook is registered for the caller, the corresponding function
     * will be called with `data` and empty `operatorData`. See {IERC777Sender}.
     *
     * Emits a {Burned} event.
     *
     * Requirements
     *
     * - the caller must have at least `amount` tokens.
     */
    function burn(uint256 amount, bytes calldata data) external;

    /**
     * @dev Returns true if an account is an operator of `tokenHolder`.
     * Operators can send and burn tokens on behalf of their owners. All
     * accounts are their own operator.
     *
     * See {operatorSend} and {operatorBurn}.
     */
    function isOperatorFor(address operator, address tokenHolder) external view returns (bool);

    /**
     * @dev Make an account an operator of the caller.
     *
     * See {isOperatorFor}.
     *
     * Emits an {AuthorizedOperator} event.
     *
     * Requirements
     *
     * - `operator` cannot be calling address.
     */
    function authorizeOperator(address operator) external;

    /**
     * @dev Revoke an account's operator status for the caller.
     *
     * See {isOperatorFor} and {defaultOperators}.
     *
     * Emits a {RevokedOperator} event.
     *
     * Requirements
     *
     * - `operator` cannot be calling address.
     */
    function revokeOperator(address operator) external;

    /**
     * @dev Returns the list of default operators. These accounts are operators
     * for all token holders, even if {authorizeOperator} was never called on
     * them.
     *
     * This list is immutable, but individual holders may revoke these via
     * {revokeOperator}, in which case {isOperatorFor} will return false.
     */
    function defaultOperators() external view returns (address[] memory);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient`. The caller must
     * be an operator of `sender`.
     *
     * If send or receive hooks are registered for `sender` and `recipient`,
     * the corresponding functions will be called with `data` and
     * `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * Emits a {Sent} event.
     *
     * Requirements
     *
     * - `sender` cannot be the zero address.
     * - `sender` must have at least `amount` tokens.
     * - the caller must be an operator for `sender`.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function operatorSend(
        address sender,
        address recipient,
        uint256 amount,
        bytes calldata data,
        bytes calldata operatorData
    ) external;

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the total supply.
     * The caller must be an operator of `account`.
     *
     * If a send hook is registered for `account`, the corresponding function
     * will be called with `data` and `operatorData`. See {IERC777Sender}.
     *
     * Emits a {Burned} event.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     * - the caller must be an operator for `account`.
     */
    function operatorBurn(address account, uint256 amount, bytes calldata data, bytes calldata operatorData) external;

    event Sent(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256 amount,
        bytes data,
        bytes operatorData
    );
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822ProxiableUpgradeable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (metatx/ERC2771Context.sol)

pragma solidity ^0.8.20;

import { ContextUpgradeable } from "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Context variant with ERC2771 support.
 *
 * WARNING: Avoid using this pattern in contracts that rely in a specific calldata length as they'll
 * be affected by any forwarder whose `msg.data` is suffixed with the `from` address according to the ERC2771
 * specification adding the address size in bytes (20) to the calldata size. An example of an unexpected
 * behavior could be an unintended fallback (or another function) invocation while trying to invoke the `receive`
 * function only accessible if `msg.data.length == 0`.
 */
abstract contract ERC2771ContextUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable _trustedForwarder;

    /**
     * @dev Initializes the contract with a trusted forwarder, which will be able to
     * invoke functions on this contract on behalf of other accounts.
     *
     * NOTE: The trusted forwarder can be replaced by overriding {trustedForwarder}.
     */
    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor(address trustedForwarder_) {
        _trustedForwarder = trustedForwarder_;
    }

    /**
     * @dev Returns the address of the trusted forwarder.
     */
    function trustedForwarder() public view virtual returns (address) {
        return _trustedForwarder;
    }

    /**
     * @dev Indicates whether any particular address is the trusted forwarder.
     */
    function isTrustedForwarder(address forwarder) public view virtual returns (bool) {
        return forwarder == trustedForwarder();
    }

    /**
     * @dev Override for `msg.sender`. Defaults to the original `msg.sender` whenever
     * a call is not performed by the trusted forwarder or the calldata length is less than
     * 20 bytes (an address length).
     */
    function _msgSender() internal view virtual override returns (address sender) {
        if (isTrustedForwarder(msg.sender) && msg.data.length >= 20) {
            // The assembly code is more direct than the Solidity version using `abi.decode`.
            /// @solidity memory-safe-assembly
            assembly {
                sender := shr(96, calldataload(sub(calldatasize(), 20)))
            }
        } else {
            return super._msgSender();
        }
    }

    /**
     * @dev Override for `msg.data`. Defaults to the original `msg.data` whenever
     * a call is not performed by the trusted forwarder or the calldata length is less than
     * 20 bytes (an address length).
     */
    function _msgData() internal view virtual override returns (bytes calldata) {
        if (isTrustedForwarder(msg.sender) && msg.data.length >= 20) {
            return msg.data[:msg.data.length - 20];
        } else {
            return super._msgData();
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (metatx/ERC2771Forwarder.sol)

pragma solidity ^0.8.20;

import { ERC2771ContextUpgradeable } from "./ERC2771ContextUpgradeable.sol";
import { ECDSAUpgradeable } from "../utils/cryptography/ECDSAUpgradeable.sol";
import { EIP712Upgradeable } from "../utils/cryptography/EIP712Upgradeable.sol";
import { NoncesUpgradeable } from "../utils/NoncesUpgradeable.sol";
import { AddressUpgradeable } from "../utils/AddressUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev A forwarder compatible with ERC2771 contracts. See {ERC2771Context}.
 *
 * This forwarder operates on forward requests that include:
 *
 * * `from`: An address to operate on behalf of. It is required to be equal to the request signer.
 * * `to`: The address that should be called.
 * * `value`: The amount of native token to attach with the requested call.
 * * `gas`: The amount of gas limit that will be forwarded with the requested call.
 * * `nonce`: A unique transaction ordering identifier to avoid replayability and request invalidation.
 * * `deadline`: A timestamp after which the request is not executable anymore.
 * * `data`: Encoded `msg.data` to send with the requested call.
 *
 * Relayers are able to submit batches if they are processing a high volume of requests. With high
 * throughput, relayers may run into limitations of the chain such as limits on the number of
 * transactions in the mempool. In these cases the recommendation is to distribute the load among
 * multiple accounts.
 *
 * NOTE: Batching requests includes an optional refund for unused `msg.value` that is achieved by
 * performing a call with empty calldata. While this is within the bounds of ERC-2771 compliance,
 * if the refund receiver happens to consider the forwarder a trusted forwarder, it MUST properly
 * handle `msg.data.length == 0`. `ERC2771Context` in OpenZeppelin Contracts versions prior to 4.9.3
 * do not handle this properly.
 *
 * ==== Security Considerations
 *
 * If a relayer submits a forward request, it should be willing to pay up to 100% of the gas amount
 * specified in the request. This contract does not implement any kind of retribution for this gas,
 * and it is assumed that there is an out of band incentive for relayers to pay for execution on
 * behalf of signers. Often, the relayer is operated by a project that will consider it a user
 * acquisition cost.
 *
 * By offering to pay for gas, relayers are at risk of having that gas used by an attacker toward
 * some other purpose that is not aligned with the expected out of band incentives. If you operate a
 * relayer, consider whitelisting target contracts and function selectors. When relaying ERC-721 or
 * ERC-1155 transfers specifically, consider rejecting the use of the `data` field, since it can be
 * used to execute arbitrary code.
 */
contract ERC2771ForwarderUpgradeable is Initializable, EIP712Upgradeable, NoncesUpgradeable {
    using ECDSAUpgradeable for bytes32;

    struct ForwardRequestData {
        address from;
        address to;
        uint256 value;
        uint256 gas;
        uint48 deadline;
        bytes data;
        bytes signature;
    }

    bytes32 internal constant _FORWARD_REQUEST_TYPEHASH =
        keccak256(
            "ForwardRequest(address from,address to,uint256 value,uint256 gas,uint256 nonce,uint48 deadline,bytes data)"
        );

    /**
     * @dev Emitted when a `ForwardRequest` is executed.
     *
     * NOTE: An unsuccessful forward request could be due to an invalid signature, an expired deadline,
     * or simply a revert in the requested call. The contract guarantees that the relayer is not able to force
     * the requested call to run out of gas.
     */
    event ExecutedForwardRequest(address indexed signer, uint256 nonce, bool success);

    /**
     * @dev The request `from` doesn't match with the recovered `signer`.
     */
    error ERC2771ForwarderInvalidSigner(address signer, address from);

    /**
     * @dev The `requestedValue` doesn't match with the available `msgValue`.
     */
    error ERC2771ForwarderMismatchedValue(uint256 requestedValue, uint256 msgValue);

    /**
     * @dev The request `deadline` has expired.
     */
    error ERC2771ForwarderExpiredRequest(uint48 deadline);

    /**
     * @dev The request target doesn't trust the `forwarder`.
     */
    error ERC2771UntrustfulTarget(address target, address forwarder);

    /**
     * @dev See {EIP712-constructor}.
     */
    function __ERC2771Forwarder_init(string memory name) internal onlyInitializing {
        __EIP712_init_unchained(name, "1");
    }

    function __ERC2771Forwarder_init_unchained(string memory) internal onlyInitializing {}

    /**
     * @dev Returns `true` if a request is valid for a provided `signature` at the current block timestamp.
     *
     * A transaction is considered valid when the target trusts this forwarder, the request hasn't expired
     * (deadline is not met), and the signer matches the `from` parameter of the signed request.
     *
     * NOTE: A request may return false here but it won't cause {executeBatch} to revert if a refund
     * receiver is provided.
     */
    function verify(ForwardRequestData calldata request) public view virtual returns (bool) {
        (bool isTrustedForwarder, bool active, bool signerMatch, ) = _validate(request);
        return isTrustedForwarder && active && signerMatch;
    }

    /**
     * @dev Executes a `request` on behalf of `signature`'s signer using the ERC-2771 protocol. The gas
     * provided to the requested call may not be exactly the amount requested, but the call will not run
     * out of gas. Will revert if the request is invalid or the call reverts, in this case the nonce is not consumed.
     *
     * Requirements:
     *
     * - The request value should be equal to the provided `msg.value`.
     * - The request should be valid according to {verify}.
     */
    function execute(ForwardRequestData calldata request) public payable virtual {
        // We make sure that msg.value and request.value match exactly.
        // If the request is invalid or the call reverts, this whole function
        // will revert, ensuring value isn't stuck.
        if (msg.value != request.value) {
            revert ERC2771ForwarderMismatchedValue(request.value, msg.value);
        }

        if (!_execute(request, true)) {
            revert AddressUpgradeable.FailedInnerCall();
        }
    }

    /**
     * @dev Batch version of {execute} with optional refunding and atomic execution.
     *
     * In case a batch contains at least one invalid request (see {verify}), the
     * request will be skipped and the `refundReceiver` parameter will receive back the
     * unused requested value at the end of the execution. This is done to prevent reverting
     * the entire batch when a request is invalid or has already been submitted.
     *
     * If the `refundReceiver` is the `address(0)`, this function will revert when at least
     * one of the requests was not valid instead of skipping it. This could be useful if
     * a batch is required to get executed atomically (at least at the top-level). For example,
     * refunding (and thus atomicity) can be opt-out if the relayer is using a service that avoids
     * including reverted transactions.
     *
     * Requirements:
     *
     * - The sum of the requests' values should be equal to the provided `msg.value`.
     * - All of the requests should be valid (see {verify}) when `refundReceiver` is the zero address.
     *
     * NOTE: Setting a zero `refundReceiver` guarantees an all-or-nothing requests execution only for
     * the first-level forwarded calls. In case a forwarded request calls to a contract with another
     * subcall, the second-level call may revert without the top-level call reverting.
     */
    function executeBatch(
        ForwardRequestData[] calldata requests,
        address payable refundReceiver
    ) public payable virtual {
        bool atomic = refundReceiver == address(0);

        uint256 requestsValue;
        uint256 refundValue;

        for (uint256 i; i < requests.length; ++i) {
            requestsValue += requests[i].value;
            bool success = _execute(requests[i], atomic);
            if (!success) {
                refundValue += requests[i].value;
            }
        }

        // The batch should revert if there's a mismatched msg.value provided
        // to avoid request value tampering
        if (requestsValue != msg.value) {
            revert ERC2771ForwarderMismatchedValue(requestsValue, msg.value);
        }

        // Some requests with value were invalid (possibly due to frontrunning).
        // To avoid leaving ETH in the contract this value is refunded.
        if (refundValue != 0) {
            // We know refundReceiver != address(0) && requestsValue == msg.value
            // meaning we can ensure refundValue is not taken from the original contract's balance
            // and refundReceiver is a known account.
            AddressUpgradeable.sendValue(refundReceiver, refundValue);
        }
    }

    /**
     * @dev Validates if the provided request can be executed at current block timestamp with
     * the given `request.signature` on behalf of `request.signer`.
     */
    function _validate(
        ForwardRequestData calldata request
    ) internal view virtual returns (bool isTrustedForwarder, bool active, bool signerMatch, address signer) {
        (bool isValid, address recovered) = _recoverForwardRequestSigner(request);

        return (
            _isTrustedByTarget(request.to),
            request.deadline >= block.timestamp,
            isValid && recovered == request.from,
            recovered
        );
    }

    /**
     * @dev Returns a tuple with the recovered the signer of an EIP712 forward request message hash
     * and a boolean indicating if the signature is valid.
     *
     * NOTE: The signature is considered valid if {ECDSA-tryRecover} indicates no recover error for it.
     */
    function _recoverForwardRequestSigner(
        ForwardRequestData calldata request
    ) internal view virtual returns (bool, address) {
        (address recovered, ECDSAUpgradeable.RecoverError err, ) = _hashTypedDataV4(
            keccak256(
                abi.encode(
                    _FORWARD_REQUEST_TYPEHASH,
                    request.from,
                    request.to,
                    request.value,
                    request.gas,
                    nonces(request.from),
                    request.deadline,
                    keccak256(request.data)
                )
            )
        ).tryRecover(request.signature);

        return (err == ECDSAUpgradeable.RecoverError.NoError, recovered);
    }

    /**
     * @dev Validates and executes a signed request returning the request call `success` value.
     *
     * Internal function without msg.value validation.
     *
     * Requirements:
     *
     * - The caller must have provided enough gas to forward with the call.
     * - The request must be valid (see {verify}) if the `requireValidRequest` is true.
     *
     * Emits an {ExecutedForwardRequest} event.
     *
     * IMPORTANT: Using this function doesn't check that all the `msg.value` was sent, potentially
     * leaving value stuck in the contract.
     */
    function _execute(
        ForwardRequestData calldata request,
        bool requireValidRequest
    ) internal virtual returns (bool success) {
        (bool isTrustedForwarder, bool active, bool signerMatch, address signer) = _validate(request);

        // Need to explicitly specify if a revert is required since non-reverting is default for
        // batches and reversion is opt-in since it could be useful in some scenarios
        if (requireValidRequest) {
            if (!isTrustedForwarder) {
                revert ERC2771UntrustfulTarget(request.to, address(this));
            }

            if (!active) {
                revert ERC2771ForwarderExpiredRequest(request.deadline);
            }

            if (!signerMatch) {
                revert ERC2771ForwarderInvalidSigner(signer, request.from);
            }
        }

        // Ignore an invalid request because requireValidRequest = false
        if (isTrustedForwarder && signerMatch && active) {
            // Nonce should be used before the call to prevent reusing by reentrancy
            uint256 currentNonce = _useNonce(signer);

            uint256 reqGas = request.gas;
            address to = request.to;
            uint256 value = request.value;
            bytes memory data = abi.encodePacked(request.data, request.from);

            uint256 gasLeft;

            assembly {
                success := call(reqGas, to, value, add(data, 0x20), mload(data), 0, 0)
                gasLeft := gas()
            }

            _checkForwardedGas(gasLeft, request);

            emit ExecutedForwardRequest(signer, currentNonce, success);
        }
    }

    /**
     * @dev Returns whether the target trusts this forwarder.
     *
     * This function performs a static call to the target contract calling the
     * {ERC2771Context-isTrustedForwarder} function.
     */
    function _isTrustedByTarget(address target) private view returns (bool) {
        bytes memory encodedParams = abi.encodeCall(ERC2771ContextUpgradeable.isTrustedForwarder, (address(this)));

        bool success;
        uint256 returnSize;
        uint256 returnValue;
        /// @solidity memory-safe-assembly
        assembly {
            // Perform the staticcal and save the result in the scratch space.
            // | Location  | Content  | Content (Hex)                                                      |
            // |-----------|----------|--------------------------------------------------------------------|
            // |           |          |                                                           result ↓ |
            // | 0x00:0x1F | selector | 0x0000000000000000000000000000000000000000000000000000000000000001 |
            success := staticcall(gas(), target, add(encodedParams, 0x20), mload(encodedParams), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        return success && returnSize >= 0x20 && returnValue > 0;
    }

    /**
     * @dev Checks if the requested gas was correctly forwarded to the callee.
     *
     * As a consequence of https://eips.ethereum.org/EIPS/eip-150[EIP-150]:
     * - At most `gasleft() - floor(gasleft() / 64)` is forwarded to the callee.
     * - At least `floor(gasleft() / 64)` is kept in the caller.
     *
     * It reverts consuming all the available gas if the forwarded gas is not the requested gas.
     *
     * IMPORTANT: The `gasLeft` parameter should be measured exactly at the end of the forwarded call.
     * Any gas consumed in between will make room for bypassing this check.
     */
    function _checkForwardedGas(uint256 gasLeft, ForwardRequestData calldata request) private pure {
        // To avoid insufficient gas griefing attacks, as referenced in https://ronan.eth.limo/blog/ethereum-gas-dangers/
        //
        // A malicious relayer can attempt to shrink the gas forwarded so that the underlying call reverts out-of-gas
        // but the forwarding itself still succeeds. In order to make sure that the subcall received sufficient gas,
        // we will inspect gasleft() after the forwarding.
        //
        // Let X be the gas available before the subcall, such that the subcall gets at most X * 63 / 64.
        // We can't know X after CALL dynamic costs, but we want it to be such that X * 63 / 64 >= req.gas.
        // Let Y be the gas used in the subcall. gasleft() measured immediately after the subcall will be gasleft() = X - Y.
        // If the subcall ran out of gas, then Y = X * 63 / 64 and gasleft() = X - Y = X / 64.
        // Under this assumption req.gas / 63 > gasleft() is true is true if and only if
        // req.gas / 63 > X / 64, or equivalently req.gas > X * 63 / 64.
        // This means that if the subcall runs out of gas we are able to detect that insufficient gas was passed.
        //
        // We will now also see that req.gas / 63 > gasleft() implies that req.gas >= X * 63 / 64.
        // The contract guarantees Y <= req.gas, thus gasleft() = X - Y >= X - req.gas.
        // -    req.gas / 63 > gasleft()
        // -    req.gas / 63 >= X - req.gas
        // -    req.gas >= X * 63 / 64
        // In other words if req.gas < X * 63 / 64 then req.gas / 63 <= gasleft(), thus if the relayer behaves honestly
        // the forwarding does not revert.
        if (gasLeft < request.gas / 63) {
            // We explicitly trigger invalid opcode to consume all gas and bubble-up the effects, since
            // neither revert or assert consume all gas since Solidity 0.8.20
            // https://docs.soliditylang.org/en/v0.8.20/control-structures.html#panic-via-assert-and-error-via-require
            /// @solidity memory-safe-assembly
            assembly {
                invalid()
            }
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { AccessManagedUpgradeable } from "../access/manager/AccessManagedUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

abstract contract AccessManagedTargetUpgradeable is Initializable, AccessManagedUpgradeable {
    event CalledRestricted(address caller);
    event CalledUnrestricted(address caller);

    function __AccessManagedTarget_init() internal onlyInitializing {
    }

    function __AccessManagedTarget_init_unchained() internal onlyInitializing {
    }
    function fnRestricted() public restricted {
        emit CalledRestricted(msg.sender);
    }

    function fnUnrestricted() public {
        emit CalledUnrestricted(msg.sender);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ArraysUpgradeable } from "../utils/ArraysUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract Uint256ArraysMockUpgradeable is Initializable {
    using ArraysUpgradeable for uint256[];

    uint256[] private _array;

    function __Uint256ArraysMock_init(uint256[] memory array) internal onlyInitializing {
        __Uint256ArraysMock_init_unchained(array);
    }

    function __Uint256ArraysMock_init_unchained(uint256[] memory array) internal onlyInitializing {
        _array = array;
    }

    function findUpperBound(uint256 element) external view returns (uint256) {
        return _array.findUpperBound(element);
    }

    function unsafeAccess(uint256 pos) external view returns (uint256) {
        return _array.unsafeAccess(pos).value;
    }
}

contract AddressArraysMockUpgradeable is Initializable {
    using ArraysUpgradeable for address[];

    address[] private _array;

    function __AddressArraysMock_init(address[] memory array) internal onlyInitializing {
        __AddressArraysMock_init_unchained(array);
    }

    function __AddressArraysMock_init_unchained(address[] memory array) internal onlyInitializing {
        _array = array;
    }

    function unsafeAccess(uint256 pos) external view returns (address) {
        return _array.unsafeAccess(pos).value;
    }
}

contract Bytes32ArraysMockUpgradeable is Initializable {
    using ArraysUpgradeable for bytes32[];

    bytes32[] private _array;

    function __Bytes32ArraysMock_init(bytes32[] memory array) internal onlyInitializing {
        __Bytes32ArraysMock_init_unchained(array);
    }

    function __Bytes32ArraysMock_init_unchained(bytes32[] memory array) internal onlyInitializing {
        _array = array;
    }

    function unsafeAccess(uint256 pos) external view returns (bytes32) {
        return _array.unsafeAccess(pos).value;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../proxy/utils/Initializable.sol";

contract CallReceiverMockUpgradeable is Initializable {
    event MockFunctionCalled();
    event MockFunctionCalledWithArgs(uint256 a, uint256 b);

    uint256[] private _array;

    function __CallReceiverMock_init() internal onlyInitializing {
    }

    function __CallReceiverMock_init_unchained() internal onlyInitializing {
    }
    function mockFunction() public payable returns (string memory) {
        emit MockFunctionCalled();

        return "0x1234";
    }

    function mockFunctionEmptyReturn() public payable {
        emit MockFunctionCalled();
    }

    function mockFunctionWithArgs(uint256 a, uint256 b) public payable returns (string memory) {
        emit MockFunctionCalledWithArgs(a, b);

        return "0x1234";
    }

    function mockFunctionNonPayable() public returns (string memory) {
        emit MockFunctionCalled();

        return "0x1234";
    }

    function mockStaticFunction() public pure returns (string memory) {
        return "0x1234";
    }

    function mockFunctionRevertsNoReason() public payable {
        revert();
    }

    function mockFunctionRevertsReason() public payable {
        revert("CallReceiverMock: reverting");
    }

    function mockFunctionThrows() public payable {
        assert(false);
    }

    function mockFunctionOutOfGas() public payable {
        for (uint256 i = 0; ; ++i) {
            _array.push(i);
        }
    }

    function mockFunctionWritesStorage(bytes32 slot, bytes32 value) public returns (string memory) {
        assembly {
            sstore(slot, value)
        }
        return "0x1234";
    }
}

contract CallReceiverMockTrustingForwarderUpgradeable is Initializable, CallReceiverMockUpgradeable {
    address private _trustedForwarder;

    function __CallReceiverMockTrustingForwarder_init(address trustedForwarder_) internal onlyInitializing {
        __CallReceiverMockTrustingForwarder_init_unchained(trustedForwarder_);
    }

    function __CallReceiverMockTrustingForwarder_init_unchained(address trustedForwarder_) internal onlyInitializing {
        _trustedForwarder = trustedForwarder_;
    }

    function isTrustedForwarder(address forwarder) public view virtual returns (bool) {
        return forwarder == _trustedForwarder;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ContextUpgradeable } from "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract ContextMockUpgradeable is Initializable, ContextUpgradeable {
    event Sender(address sender);

    function __ContextMock_init() internal onlyInitializing {
    }

    function __ContextMock_init_unchained() internal onlyInitializing {
    }
    function msgSender() public {
        emit Sender(_msgSender());
    }

    event Data(bytes data, uint256 integerValue, string stringValue);

    function msgData(uint256 integerValue, string memory stringValue) public {
        emit Data(_msgData(), integerValue, stringValue);
    }

    event DataShort(bytes data);

    function msgDataShort() public {
        emit DataShort(_msgData());
    }
}

contract ContextMockCallerUpgradeable is Initializable {
    function __ContextMockCaller_init() internal onlyInitializing {
    }

    function __ContextMockCaller_init_unchained() internal onlyInitializing {
    }
    function callSender(ContextMockUpgradeable context) public {
        context.msgSender();
    }

    function callData(ContextMockUpgradeable context, uint256 integerValue, string memory stringValue) public {
        context.msgData(integerValue, stringValue);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC1967UtilsUpgradeable } from "../proxy/ERC1967/ERC1967UtilsUpgradeable.sol";
import { StorageSlotUpgradeable } from "../utils/StorageSlotUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

abstract contract ImplUpgradeable is Initializable {
    function __Impl_init() internal onlyInitializing {
    }

    function __Impl_init_unchained() internal onlyInitializing {
    }
    function version() public pure virtual returns (string memory);
}

contract DummyImplementationUpgradeable is Initializable {
    uint256 public value;
    string public text;
    uint256[] public values;

    function __DummyImplementation_init() internal onlyInitializing {
    }

    function __DummyImplementation_init_unchained() internal onlyInitializing {
    }
    function initializeNonPayable() public {
        value = 10;
    }

    function initializePayable() public payable {
        value = 100;
    }

    function initializeNonPayableWithValue(uint256 _value) public {
        value = _value;
    }

    function initializePayableWithValue(uint256 _value) public payable {
        value = _value;
    }

    function initialize(uint256 _value, string memory _text, uint256[] memory _values) public {
        value = _value;
        text = _text;
        values = _values;
    }

    function get() public pure returns (bool) {
        return true;
    }

    function version() public pure virtual returns (string memory) {
        return "V1";
    }

    function reverts() public pure {
        require(false, "DummyImplementation reverted");
    }

    // Use for forcing an unsafe TransparentUpgradeableProxy admin override
    function unsafeOverrideAdmin(address newAdmin) public {
        StorageSlotUpgradeable.getAddressSlot(ERC1967UtilsUpgradeable.ADMIN_SLOT).value = newAdmin;
    }
}

contract DummyImplementationV2Upgradeable is Initializable, DummyImplementationUpgradeable {
    function __DummyImplementationV2_init() internal onlyInitializing {
    }

    function __DummyImplementationV2_init_unchained() internal onlyInitializing {
    }
    function migrate(uint256 newVal) public payable {
        value = newVal;
    }

    function version() public pure override returns (string memory) {
        return "V2";
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ECDSAUpgradeable } from "../utils/cryptography/ECDSAUpgradeable.sol";
import { EIP712Upgradeable } from "../utils/cryptography/EIP712Upgradeable.sol";
import "../proxy/utils/Initializable.sol";

abstract contract EIP712VerifierUpgradeable is Initializable, EIP712Upgradeable {
    function __EIP712Verifier_init() internal onlyInitializing {
    }

    function __EIP712Verifier_init_unchained() internal onlyInitializing {
    }
    function verify(bytes memory signature, address signer, address mailTo, string memory mailContents) external view {
        bytes32 digest = _hashTypedDataV4(
            keccak256(abi.encode(keccak256("Mail(address to,string contents)"), mailTo, keccak256(bytes(mailContents))))
        );
        address recoveredSigner = ECDSAUpgradeable.recover(digest, signature);
        require(recoveredSigner == signer);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { OwnableUpgradeable } from "../access/OwnableUpgradeable.sol";
import { IERC1271Upgradeable } from "../interfaces/IERC1271Upgradeable.sol";
import { ECDSAUpgradeable } from "../utils/cryptography/ECDSAUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract ERC1271WalletMockUpgradeable is Initializable, OwnableUpgradeable, IERC1271Upgradeable {
    function __ERC1271WalletMock_init(address originalOwner) internal onlyInitializing {
        __Ownable_init_unchained(originalOwner);
    }

    function __ERC1271WalletMock_init_unchained(address) internal onlyInitializing {}

    function isValidSignature(bytes32 hash, bytes memory signature) public view returns (bytes4 magicValue) {
        return ECDSAUpgradeable.recover(hash, signature) == owner() ? this.isValidSignature.selector : bytes4(0);
    }
}

contract ERC1271MaliciousMockUpgradeable is Initializable, IERC1271Upgradeable {
    function __ERC1271MaliciousMock_init() internal onlyInitializing {
    }

    function __ERC1271MaliciousMock_init_unchained() internal onlyInitializing {
    }
    function isValidSignature(bytes32, bytes memory) public pure returns (bytes4) {
        assembly {
            mstore(0, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            return(0, 32)
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../../utils/introspection/IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * https://eips.ethereum.org/EIPS/eip-214#specification
 * From the specification:
 * > Any attempts to make state-changing operations inside an execution instance with STATIC set to true will instead
 * throw an exception.
 * > These operations include [...], LOG0, LOG1, LOG2, [...]
 *
 * therefore, because this contract is staticcall'd we need to not emit events (which is how solidity-coverage works)
 * solidity-coverage ignores the /mocks folder, so we duplicate its implementation here to avoid instrumenting it
 */
contract SupportsInterfaceWithLookupMockUpgradeable is Initializable, IERC165Upgradeable {
    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 public constant INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev A mapping of interface id to whether or not it's supported.
     */
    mapping(bytes4 interfaceId => bool) private _supportedInterfaces;

    /**
     * @dev A contract implementing SupportsInterfaceWithLookup
     * implement ERC165 itself.
     */
    function __SupportsInterfaceWithLookupMock_init() internal onlyInitializing {
        __SupportsInterfaceWithLookupMock_init_unchained();
    }

    function __SupportsInterfaceWithLookupMock_init_unchained() internal onlyInitializing {
        _registerInterface(INTERFACE_ID_ERC165);
    }

    /**
     * @dev Implement supportsInterface(bytes4) using a lookup table.
     */
    function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
        return _supportedInterfaces[interfaceId];
    }

    /**
     * @dev Private method for registering an interface.
     */
    function _registerInterface(bytes4 interfaceId) internal {
        require(interfaceId != 0xffffffff, "ERC165InterfacesSupported: invalid interface id");
        _supportedInterfaces[interfaceId] = true;
    }
}

contract ERC165InterfacesSupportedUpgradeable is Initializable, SupportsInterfaceWithLookupMockUpgradeable {
    function __ERC165InterfacesSupported_init(bytes4[] memory interfaceIds) internal onlyInitializing {
        __SupportsInterfaceWithLookupMock_init_unchained();
        __ERC165InterfacesSupported_init_unchained(interfaceIds);
    }

    function __ERC165InterfacesSupported_init_unchained(bytes4[] memory interfaceIds) internal onlyInitializing {
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            _registerInterface(interfaceIds[i]);
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../../proxy/utils/Initializable.sol";

contract ERC165MaliciousDataUpgradeable is Initializable {
    function __ERC165MaliciousData_init() internal onlyInitializing {
    }

    function __ERC165MaliciousData_init_unchained() internal onlyInitializing {
    }
    function supportsInterface(bytes4) public pure returns (bool) {
        assembly {
            mstore(0, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            return(0, 32)
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../../proxy/utils/Initializable.sol";

contract ERC165MissingDataUpgradeable is Initializable {
    function __ERC165MissingData_init() internal onlyInitializing {
    }

    function __ERC165MissingData_init_unchained() internal onlyInitializing {
    }
    function supportsInterface(bytes4 interfaceId) public view {} // missing return
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../../proxy/utils/Initializable.sol";

contract ERC165NotSupportedUpgradeable is Initializable {    function __ERC165NotSupported_init() internal onlyInitializing {
    }

    function __ERC165NotSupported_init_unchained() internal onlyInitializing {
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../../utils/introspection/IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract ERC165ReturnBombMockUpgradeable is Initializable, IERC165Upgradeable {
    function __ERC165ReturnBombMock_init() internal onlyInitializing {
    }

    function __ERC165ReturnBombMock_init_unchained() internal onlyInitializing {
    }
    function supportsInterface(bytes4 interfaceId) public pure override returns (bool) {
        if (interfaceId == type(IERC165Upgradeable).interfaceId) {
            assembly {
                mstore(0, 1)
            }
        }
        assembly {
            return(0, 101500)
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ContextMockUpgradeable } from "./ContextMockUpgradeable.sol";
import { ContextUpgradeable } from "../utils/ContextUpgradeable.sol";
import { ERC2771ContextUpgradeable } from "../metatx/ERC2771ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

// By inheriting from ERC2771Context, Context's internal functions are overridden automatically
contract ERC2771ContextMockUpgradeable is Initializable, ContextMockUpgradeable, ERC2771ContextUpgradeable {
    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor(address trustedForwarder) ERC2771ContextUpgradeable(trustedForwarder) {
        emit Sender(_msgSender()); // _msgSender() should be accessible during construction
    }

    function _msgSender() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (address) {
        return ERC2771ContextUpgradeable._msgSender();
    }

    function _msgData() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (bytes calldata) {
        return ERC2771ContextUpgradeable._msgData();
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IERC20Upgradeable } from "../token/ERC20/IERC20Upgradeable.sol";
import { IERC3156FlashBorrowerUpgradeable } from "../interfaces/IERC3156Upgradeable.sol";
import { AddressUpgradeable } from "../utils/AddressUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev WARNING: this IERC3156FlashBorrower mock implementation is for testing purposes ONLY.
 * Writing a secure flash lock borrower is not an easy task, and should be done with the utmost care.
 * This is not an example of how it should be done, and no pattern present in this mock should be considered secure.
 * Following best practices, always have your contract properly audited before using them to manipulate important funds on
 * live networks.
 */
contract ERC3156FlashBorrowerMockUpgradeable is Initializable, IERC3156FlashBorrowerUpgradeable {
    bytes32 internal constant _RETURN_VALUE = keccak256("ERC3156FlashBorrower.onFlashLoan");

    bool _enableApprove;
    bool _enableReturn;

    event BalanceOf(address token, address account, uint256 value);
    event TotalSupply(address token, uint256 value);

    function __ERC3156FlashBorrowerMock_init(bool enableReturn, bool enableApprove) internal onlyInitializing {
        __ERC3156FlashBorrowerMock_init_unchained(enableReturn, enableApprove);
    }

    function __ERC3156FlashBorrowerMock_init_unchained(bool enableReturn, bool enableApprove) internal onlyInitializing {
        _enableApprove = enableApprove;
        _enableReturn = enableReturn;
    }

    function onFlashLoan(
        address /*initiator*/,
        address token,
        uint256 amount,
        uint256 fee,
        bytes calldata data
    ) public returns (bytes32) {
        require(msg.sender == token);

        emit BalanceOf(token, address(this), IERC20Upgradeable(token).balanceOf(address(this)));
        emit TotalSupply(token, IERC20Upgradeable(token).totalSupply());

        if (data.length > 0) {
            // WARNING: This code is for testing purposes only! Do not use.
            AddressUpgradeable.functionCall(token, data);
        }

        if (_enableApprove) {
            IERC20Upgradeable(token).approve(token, amount + fee);
        }

        return _enableReturn ? _RETURN_VALUE : bytes32(0);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../proxy/utils/Initializable.sol";

contract EtherReceiverMockUpgradeable is Initializable {
    bool private _acceptEther;

    function __EtherReceiverMock_init() internal onlyInitializing {
    }

    function __EtherReceiverMock_init_unchained() internal onlyInitializing {
    }
    function setAcceptEther(bool acceptEther) public {
        _acceptEther = acceptEther;
    }

    receive() external payable {
        if (!_acceptEther) {
            revert();
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @title InitializableMock
 * @dev This contract is a mock to test initializable functionality
 */
contract InitializableMock is Initializable {
    bool public initializerRan;
    bool public onlyInitializingRan;
    uint256 public x;

    function isInitializing() public view returns (bool) {
        return _isInitializing();
    }

    function initialize() public initializer {
        initializerRan = true;
    }

    function initializeOnlyInitializing() public onlyInitializing {
        onlyInitializingRan = true;
    }

    function initializerNested() public initializer {
        initialize();
    }

    function onlyInitializingNested() public initializer {
        initializeOnlyInitializing();
    }

    function initializeWithX(uint256 _x) public payable initializer {
        x = _x;
    }

    function nonInitializable(uint256 _x) public payable {
        x = _x;
    }

    function fail() public pure {
        require(false, "InitializableMock forced failure");
    }
}

contract ConstructorInitializableMock is Initializable {
    bool public initializerRan;
    bool public onlyInitializingRan;

    constructor() initializer {
        initialize();
        initializeOnlyInitializing();
    }

    function initialize() public initializer {
        initializerRan = true;
    }

    function initializeOnlyInitializing() public onlyInitializing {
        onlyInitializingRan = true;
    }
}

contract ChildConstructorInitializableMock is ConstructorInitializableMock {
    bool public childInitializerRan;

    constructor() initializer {
        childInitialize();
    }

    function childInitialize() public initializer {
        childInitializerRan = true;
    }
}

contract ReinitializerMock is Initializable {
    uint256 public counter;

    function getInitializedVersion() public view returns (uint64) {
        return _getInitializedVersion();
    }

    function initialize() public initializer {
        doStuff();
    }

    function reinitialize(uint64 i) public reinitializer(i) {
        doStuff();
    }

    function nestedReinitialize(uint64 i, uint64 j) public reinitializer(i) {
        reinitialize(j);
    }

    function chainReinitialize(uint64 i, uint64 j) public {
        reinitialize(i);
        reinitialize(j);
    }

    function disableInitializers() public {
        _disableInitializers();
    }

    function doStuff() public onlyInitializing {
        counter++;
    }
}

contract DisableNew is Initializable {
    constructor() {
        _disableInitializers();
    }
}

contract DisableOld is Initializable {
    constructor() initializer {}
}

contract DisableBad1 is DisableNew, DisableOld {}

contract DisableBad2 is Initializable {
    constructor() initializer {
        _disableInitializers();
    }
}

contract DisableOk is DisableOld, DisableNew {}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20MulticallMockUpgradeable } from "./token/ERC20MulticallMockUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract MulticallTestUpgradeable is Initializable {
    function __MulticallTest_init() internal onlyInitializing {
    }

    function __MulticallTest_init_unchained() internal onlyInitializing {
    }
    function checkReturnValues(
        ERC20MulticallMockUpgradeable multicallToken,
        address[] calldata recipients,
        uint256[] calldata amounts
    ) external {
        bytes[] memory calls = new bytes[](recipients.length);
        for (uint256 i = 0; i < recipients.length; i++) {
            calls[i] = abi.encodeCall(multicallToken.transfer, (recipients[i], amounts[i]));
        }

        bytes[] memory results = multicallToken.multicall(calls);
        for (uint256 i = 0; i < results.length; i++) {
            require(abi.decode(results[i], (bool)));
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {Initializable} from "../proxy/utils/Initializable.sol";

// Sample contracts showing upgradeability with multiple inheritance.
// Child contract inherits from Father and Mother contracts, and Father extends from Gramps.
//
//         Human
//       /       \
//      |       Gramps
//      |         |
//    Mother    Father
//      |         |
//      -- Child --

/**
 * Sample base initializable contract that is a human
 */
contract SampleHuman is Initializable {
    bool public isHuman;

    function initialize() public initializer {
        __SampleHuman_init();
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleHuman_init() internal onlyInitializing {
        __SampleHuman_init_unchained();
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleHuman_init_unchained() internal onlyInitializing {
        isHuman = true;
    }
}

/**
 * Sample base initializable contract that defines a field mother
 */
contract SampleMother is Initializable, SampleHuman {
    uint256 public mother;

    function initialize(uint256 value) public initializer {
        __SampleMother_init(value);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleMother_init(uint256 value) internal onlyInitializing {
        __SampleHuman_init();
        __SampleMother_init_unchained(value);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleMother_init_unchained(uint256 value) internal onlyInitializing {
        mother = value;
    }
}

/**
 * Sample base initializable contract that defines a field gramps
 */
contract SampleGramps is Initializable, SampleHuman {
    string public gramps;

    function initialize(string memory value) public initializer {
        __SampleGramps_init(value);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleGramps_init(string memory value) internal onlyInitializing {
        __SampleHuman_init();
        __SampleGramps_init_unchained(value);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleGramps_init_unchained(string memory value) internal onlyInitializing {
        gramps = value;
    }
}

/**
 * Sample base initializable contract that defines a field father and extends from gramps
 */
contract SampleFather is Initializable, SampleGramps {
    uint256 public father;

    function initialize(string memory _gramps, uint256 _father) public initializer {
        __SampleFather_init(_gramps, _father);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleFather_init(string memory _gramps, uint256 _father) internal onlyInitializing {
        __SampleGramps_init(_gramps);
        __SampleFather_init_unchained(_father);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleFather_init_unchained(uint256 _father) internal onlyInitializing {
        father = _father;
    }
}

/**
 * Child extends from mother, father (gramps)
 */
contract SampleChild is Initializable, SampleMother, SampleFather {
    uint256 public child;

    function initialize(uint256 _mother, string memory _gramps, uint256 _father, uint256 _child) public initializer {
        __SampleChild_init(_mother, _gramps, _father, _child);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleChild_init(
        uint256 _mother,
        string memory _gramps,
        uint256 _father,
        uint256 _child
    ) internal onlyInitializing {
        __SampleMother_init(_mother);
        __SampleFather_init(_gramps, _father);
        __SampleChild_init_unchained(_child);
    }

    // solhint-disable-next-line func-name-mixedcase
    function __SampleChild_init_unchained(uint256 _child) internal onlyInitializing {
        child = _child;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { PausableUpgradeable } from "../utils/PausableUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract PausableMockUpgradeable is Initializable, PausableUpgradeable {
    bool public drasticMeasureTaken;
    uint256 public count;

    function __PausableMock_init() internal onlyInitializing {
        __Pausable_init_unchained();
        __PausableMock_init_unchained();
    }

    function __PausableMock_init_unchained() internal onlyInitializing {
        drasticMeasureTaken = false;
        count = 0;
    }

    function normalProcess() external whenNotPaused {
        count++;
    }

    function drasticMeasure() external whenPaused {
        drasticMeasureTaken = true;
    }

    function pause() external {
        _pause();
    }

    function unpause() external {
        _unpause();
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ContextUpgradeable } from "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract ReentrancyAttackUpgradeable is Initializable, ContextUpgradeable {
    function __ReentrancyAttack_init() internal onlyInitializing {
    }

    function __ReentrancyAttack_init_unchained() internal onlyInitializing {
    }
    function callSender(bytes calldata data) public {
        (bool success, ) = _msgSender().call(data);
        require(success, "ReentrancyAttack: failed call");
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ReentrancyGuardUpgradeable } from "../utils/ReentrancyGuardUpgradeable.sol";
import { ReentrancyAttackUpgradeable } from "./ReentrancyAttackUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract ReentrancyMockUpgradeable is Initializable, ReentrancyGuardUpgradeable {
    uint256 public counter;

    function __ReentrancyMock_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
        __ReentrancyMock_init_unchained();
    }

    function __ReentrancyMock_init_unchained() internal onlyInitializing {
        counter = 0;
    }

    function callback() external nonReentrant {
        _count();
    }

    function countLocalRecursive(uint256 n) public nonReentrant {
        if (n > 0) {
            _count();
            countLocalRecursive(n - 1);
        }
    }

    function countThisRecursive(uint256 n) public nonReentrant {
        if (n > 0) {
            _count();
            (bool success, ) = address(this).call(abi.encodeCall(this.countThisRecursive, (n - 1)));
            require(success, "ReentrancyMock: failed call");
        }
    }

    function countAndCall(ReentrancyAttackUpgradeable attacker) public nonReentrant {
        _count();
        attacker.callSender(abi.encodeCall(this.callback, ()));
    }

    function _count() private {
        counter += 1;
    }

    function guardedCheckEntered() public nonReentrant {
        require(_reentrancyGuardEntered());
    }

    function unguardedCheckNotEntered() public view {
        require(!_reentrancyGuardEntered());
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {Initializable} from "../proxy/utils/Initializable.sol";

contract Implementation1 is Initializable {
    uint256 internal _value;

    function initialize() public initializer {}

    function setValue(uint256 _number) public {
        _value = _number;
    }
}

contract Implementation2 is Initializable {
    uint256 internal _value;

    function initialize() public initializer {}

    function setValue(uint256 _number) public {
        _value = _number;
    }

    function getValue() public view returns (uint256) {
        return _value;
    }
}

contract Implementation3 is Initializable {
    uint256 internal _value;

    function initialize() public initializer {}

    function setValue(uint256 _number) public {
        _value = _number;
    }

    function getValue(uint256 _number) public view returns (uint256) {
        return _value + _number;
    }
}

contract Implementation4 is Initializable {
    uint256 internal _value;

    function initialize() public initializer {}

    function setValue(uint256 _number) public {
        _value = _number;
    }

    function getValue() public view returns (uint256) {
        return _value;
    }

    fallback() external {
        _value = 1;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @title MigratableMockV1
 * @dev This contract is a mock to test initializable functionality through migrations
 */
contract MigratableMockV1 is Initializable {
    uint256 public x;

    function initialize(uint256 value) public payable initializer {
        x = value;
    }
}

/**
 * @title MigratableMockV2
 * @dev This contract is a mock to test migratable functionality with params
 */
contract MigratableMockV2 is MigratableMockV1 {
    bool internal _migratedV2;
    uint256 public y;

    function migrate(uint256 value, uint256 anotherValue) public payable {
        require(!_migratedV2);
        x = value;
        y = anotherValue;
        _migratedV2 = true;
    }
}

/**
 * @title MigratableMockV3
 * @dev This contract is a mock to test migratable functionality without params
 */
contract MigratableMockV3 is MigratableMockV2 {
    bool internal _migratedV3;

    function migrate() public payable {
        require(!_migratedV3);
        uint256 oldX = x;
        x = y;
        y = oldX;
        _migratedV3 = true;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { StorageSlotUpgradeable } from "../utils/StorageSlotUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract StorageSlotMockUpgradeable is Initializable {
    using StorageSlotUpgradeable for *;

    function __StorageSlotMock_init() internal onlyInitializing {
    }

    function __StorageSlotMock_init_unchained() internal onlyInitializing {
    }
    function setBoolean(bytes32 slot, bool value) public {
        slot.getBooleanSlot().value = value;
    }

    function setAddress(bytes32 slot, address value) public {
        slot.getAddressSlot().value = value;
    }

    function setBytes32(bytes32 slot, bytes32 value) public {
        slot.getBytes32Slot().value = value;
    }

    function setUint256(bytes32 slot, uint256 value) public {
        slot.getUint256Slot().value = value;
    }

    function getBoolean(bytes32 slot) public view returns (bool) {
        return slot.getBooleanSlot().value;
    }

    function getAddress(bytes32 slot) public view returns (address) {
        return slot.getAddressSlot().value;
    }

    function getBytes32(bytes32 slot) public view returns (bytes32) {
        return slot.getBytes32Slot().value;
    }

    function getUint256(bytes32 slot) public view returns (uint256) {
        return slot.getUint256Slot().value;
    }

    mapping(uint256 key => string) public stringMap;

    function setString(bytes32 slot, string calldata value) public {
        slot.getStringSlot().value = value;
    }

    function setStringStorage(uint256 key, string calldata value) public {
        stringMap[key].getStringSlot().value = value;
    }

    function getString(bytes32 slot) public view returns (string memory) {
        return slot.getStringSlot().value;
    }

    function getStringStorage(uint256 key) public view returns (string memory) {
        return stringMap[key].getStringSlot().value;
    }

    mapping(uint256 key => bytes) public bytesMap;

    function setBytes(bytes32 slot, bytes calldata value) public {
        slot.getBytesSlot().value = value;
    }

    function setBytesStorage(uint256 key, bytes calldata value) public {
        bytesMap[key].getBytesSlot().value = value;
    }

    function getBytes(bytes32 slot) public view returns (bytes memory) {
        return slot.getBytesSlot().value;
    }

    function getBytesStorage(uint256 key) public view returns (bytes memory) {
        return bytesMap[key].getBytesSlot().value;
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { AddressUpgradeable } from "../utils/AddressUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract TimelockReentrantUpgradeable is Initializable {
    address private _reenterTarget;
    bytes private _reenterData;
    bool _reentered;

    function __TimelockReentrant_init() internal onlyInitializing {
    }

    function __TimelockReentrant_init_unchained() internal onlyInitializing {
    }
    function disableReentrancy() external {
        _reentered = true;
    }

    function enableRentrancy(address target, bytes calldata data) external {
        _reenterTarget = target;
        _reenterData = data;
    }

    function reenter() external {
        if (!_reentered) {
            _reentered = true;
            AddressUpgradeable.functionCall(_reenterTarget, _reenterData);
        }
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { IBeaconUpgradeable } from "../proxy/beacon/IBeaconUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

contract UpgradeableBeaconMockUpgradeable is Initializable, IBeaconUpgradeable {
    address public implementation;

    function __UpgradeableBeaconMock_init(address impl) internal onlyInitializing {
        __UpgradeableBeaconMock_init_unchained(impl);
    }

    function __UpgradeableBeaconMock_init_unchained(address impl) internal onlyInitializing {
        implementation = impl;
    }
}

interface IProxyExposedUpgradeable {
    // solhint-disable-next-line func-name-mixedcase
    function $getBeacon() external view returns (address);
}

contract UpgradeableBeaconReentrantMockUpgradeable is Initializable, IBeaconUpgradeable {
    error BeaconProxyBeaconSlotAddress(address beacon);

    function __UpgradeableBeaconReentrantMock_init() internal onlyInitializing {
    }

    function __UpgradeableBeaconReentrantMock_init_unchained() internal onlyInitializing {
    }
    function implementation() external view override returns (address) {
        // Revert with the beacon seen in the proxy at the moment of calling to check if it's
        // set before the call.
        revert BeaconProxyBeaconSlotAddress(IProxyExposedUpgradeable(msg.sender).$getBeacon());
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { VotesUpgradeable } from "../governance/utils/VotesUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

abstract contract VotesMockUpgradeable is Initializable, VotesUpgradeable {
    mapping(address voter => uint256) private _votingUnits;

    function __VotesMock_init() internal onlyInitializing {
    }

    function __VotesMock_init_unchained() internal onlyInitializing {
    }
    function getTotalSupply() public view returns (uint256) {
        return _getTotalSupply();
    }

    function delegate(address account, address newDelegation) public {
        return _delegate(account, newDelegation);
    }

    function _getVotingUnits(address account) internal view override returns (uint256) {
        return _votingUnits[account];
    }

    function _mint(address account, uint256 votes) internal {
        _votingUnits[account] += votes;
        _transferVotingUnits(address(0), account, votes);
    }

    function _burn(address account, uint256 votes) internal {
        _votingUnits[account] += votes;
        _transferVotingUnits(account, address(0), votes);
    }
}

abstract contract VotesTimestampMockUpgradeable is Initializable, VotesMockUpgradeable {
    function __VotesTimestampMock_init() internal onlyInitializing {
    }

    function __VotesTimestampMock_init_unchained() internal onlyInitializing {
    }
    function clock() public view override returns (uint48) {
        return uint48(block.timestamp);
    }

    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() public view virtual override returns (string memory) {
        return "mode=timestamp";
    }
}


// SPDX-License-Identifier: BSD-3-Clause
// solhint-disable private-vars-leading-underscore
/**
 * Copyright 2020 Compound Labs, Inc.
 *
 * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
 * following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
 *    disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
 *    following disclaimer in the documentation and/or other materials provided with the distribution.
 *
 * 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote
 *    products derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

pragma solidity ^0.8.20;
import "../../proxy/utils/Initializable.sol";

contract CompTimelockUpgradeable is Initializable {
    event NewAdmin(address indexed newAdmin);
    event NewPendingAdmin(address indexed newPendingAdmin);
    event NewDelay(uint256 indexed newDelay);
    event CancelTransaction(
        bytes32 indexed txHash,
        address indexed target,
        uint256 value,
        string signature,
        bytes data,
        uint256 eta
    );
    event ExecuteTransaction(
        bytes32 indexed txHash,
        address indexed target,
        uint256 value,
        string signature,
        bytes data,
        uint256 eta
    );
    event QueueTransaction(
        bytes32 indexed txHash,
        address indexed target,
        uint256 value,
        string signature,
        bytes data,
        uint256 eta
    );

    uint256 public constant GRACE_PERIOD = 14 days;
    uint256 public constant MINIMUM_DELAY = 2 days;
    uint256 public constant MAXIMUM_DELAY = 30 days;

    address public admin;
    address public pendingAdmin;
    uint256 public delay;

    mapping(bytes32 => bool) public queuedTransactions;

    function __CompTimelock_init(address admin_, uint256 delay_) internal onlyInitializing {
        __CompTimelock_init_unchained(admin_, delay_);
    }

    function __CompTimelock_init_unchained(address admin_, uint256 delay_) internal onlyInitializing {
        require(delay_ >= MINIMUM_DELAY, "Timelock::constructor: Delay must exceed minimum delay.");
        require(delay_ <= MAXIMUM_DELAY, "Timelock::setDelay: Delay must not exceed maximum delay.");

        admin = admin_;
        delay = delay_;
    }

    receive() external payable {}

    function setDelay(uint256 delay_) public {
        require(msg.sender == address(this), "Timelock::setDelay: Call must come from Timelock.");
        require(delay_ >= MINIMUM_DELAY, "Timelock::setDelay: Delay must exceed minimum delay.");
        require(delay_ <= MAXIMUM_DELAY, "Timelock::setDelay: Delay must not exceed maximum delay.");
        delay = delay_;

        emit NewDelay(delay);
    }

    function acceptAdmin() public {
        require(msg.sender == pendingAdmin, "Timelock::acceptAdmin: Call must come from pendingAdmin.");
        admin = msg.sender;
        pendingAdmin = address(0);

        emit NewAdmin(admin);
    }

    function setPendingAdmin(address pendingAdmin_) public {
        require(msg.sender == address(this), "Timelock::setPendingAdmin: Call must come from Timelock.");
        pendingAdmin = pendingAdmin_;

        emit NewPendingAdmin(pendingAdmin);
    }

    function queueTransaction(
        address target,
        uint256 value,
        string memory signature,
        bytes memory data,
        uint256 eta
    ) public returns (bytes32) {
        require(msg.sender == admin, "Timelock::queueTransaction: Call must come from admin.");
        require(
            eta >= getBlockTimestamp() + delay,
            "Timelock::queueTransaction: Estimated execution block must satisfy delay."
        );

        bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
        queuedTransactions[txHash] = true;

        emit QueueTransaction(txHash, target, value, signature, data, eta);
        return txHash;
    }

    function cancelTransaction(
        address target,
        uint256 value,
        string memory signature,
        bytes memory data,
        uint256 eta
    ) public {
        require(msg.sender == admin, "Timelock::cancelTransaction: Call must come from admin.");

        bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
        queuedTransactions[txHash] = false;

        emit CancelTransaction(txHash, target, value, signature, data, eta);
    }

    function executeTransaction(
        address target,
        uint256 value,
        string memory signature,
        bytes memory data,
        uint256 eta
    ) public payable returns (bytes memory) {
        require(msg.sender == admin, "Timelock::executeTransaction: Call must come from admin.");

        bytes32 txHash = keccak256(abi.encode(target, value, signature, data, eta));
        require(queuedTransactions[txHash], "Timelock::executeTransaction: Transaction hasn't been queued.");
        require(getBlockTimestamp() >= eta, "Timelock::executeTransaction: Transaction hasn't surpassed time lock.");
        require(getBlockTimestamp() <= eta + GRACE_PERIOD, "Timelock::executeTransaction: Transaction is stale.");

        queuedTransactions[txHash] = false;

        bytes memory callData;

        if (bytes(signature).length == 0) {
            callData = data;
        } else {
            callData = abi.encodePacked(bytes4(keccak256(bytes(signature))), data);
        }

        // solium-disable-next-line security/no-call-value
        (bool success, bytes memory returnData) = target.call{value: value}(callData);
        require(success, "Timelock::executeTransaction: Transaction execution reverted.");

        emit ExecuteTransaction(txHash, target, value, signature, data, eta);

        return returnData;
    }

    function getBlockTimestamp() internal view returns (uint256) {
        // solium-disable-next-line security/no-block-members
        return block.timestamp;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IERC20Upgradeable } from "../../token/ERC20/IERC20Upgradeable.sol";
import { ERC4626Upgradeable } from "../../token/ERC20/extensions/ERC4626Upgradeable.sol";
import { SafeERC20Upgradeable } from "../../token/ERC20/utils/SafeERC20Upgradeable.sol";
import { MathUpgradeable } from "../../utils/math/MathUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/// @dev ERC4626 vault with entry/exit fees expressed in https://en.wikipedia.org/wiki/Basis_point[basis point (bp)].
abstract contract ERC4626FeesUpgradeable is Initializable, ERC4626Upgradeable {
    using MathUpgradeable for uint256;

    uint256 private constant _BASIS_POINT_SCALE = 1e4;

    function __ERC4626Fees_init() internal onlyInitializing {
    }

    function __ERC4626Fees_init_unchained() internal onlyInitializing {
    }
    // === Overrides ===

    /// @dev Preview taking an entry fee on deposit. See {IERC4626-previewDeposit}.
    function previewDeposit(uint256 assets) public view virtual override returns (uint256) {
        uint256 fee = _feeOnTotal(assets, _entryFeeBasisPoints());
        return super.previewDeposit(assets - fee);
    }

    /// @dev Preview adding an entry fee on mint. See {IERC4626-previewMint}.
    function previewMint(uint256 shares) public view virtual override returns (uint256) {
        uint256 assets = super.previewMint(shares);
        return assets + _feeOnRaw(assets, _entryFeeBasisPoints());
    }

    /// @dev Preview adding an exit fee on withdraw. See {IERC4626-previewWithdraw}.
    function previewWithdraw(uint256 assets) public view virtual override returns (uint256) {
        uint256 fee = _feeOnRaw(assets, _exitFeeBasisPoints());
        return super.previewWithdraw(assets + fee);
    }

    /// @dev Preview taking an exit fee on redeem. See {IERC4626-previewRedeem}.
    function previewRedeem(uint256 shares) public view virtual override returns (uint256) {
        uint256 assets = super.previewRedeem(shares);
        return assets - _feeOnTotal(assets, _exitFeeBasisPoints());
    }

    /// @dev Send entry fee to {_entryFeeRecipient}. See {IERC4626-_deposit}.
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual override {
        uint256 fee = _feeOnTotal(assets, _entryFeeBasisPoints());
        address recipient = _entryFeeRecipient();

        super._deposit(caller, receiver, assets, shares);

        if (fee > 0 && recipient != address(this)) {
            SafeERC20Upgradeable.safeTransfer(IERC20Upgradeable(asset()), recipient, fee);
        }
    }

    /// @dev Send exit fee to {_exitFeeRecipient}. See {IERC4626-_deposit}.
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual override {
        uint256 fee = _feeOnRaw(assets, _exitFeeBasisPoints());
        address recipient = _exitFeeRecipient();

        super._withdraw(caller, receiver, owner, assets, shares);

        if (fee > 0 && recipient != address(this)) {
            SafeERC20Upgradeable.safeTransfer(IERC20Upgradeable(asset()), recipient, fee);
        }
    }

    // === Fee configuration ===

    function _entryFeeBasisPoints() internal view virtual returns (uint256) {
        return 0; // replace with e.g. 100 for 1%
    }

    function _exitFeeBasisPoints() internal view virtual returns (uint256) {
        return 0; // replace with e.g. 100 for 1%
    }

    function _entryFeeRecipient() internal view virtual returns (address) {
        return address(0); // replace with e.g. a treasury address
    }

    function _exitFeeRecipient() internal view virtual returns (address) {
        return address(0); // replace with e.g. a treasury address
    }

    // === Fee operations ===

    /// @dev Calculates the fees that should be added to an amount `assets` that does not already include fees.
    /// Used in {IERC4626-mint} and {IERC4626-withdraw} operations.
    function _feeOnRaw(uint256 assets, uint256 feeBasisPoints) private pure returns (uint256) {
        return assets.mulDiv(feeBasisPoints, _BASIS_POINT_SCALE, MathUpgradeable.Rounding.Ceil);
    }

    /// @dev Calculates the fee part of an amount `assets` that already includes fees.
    /// Used in {IERC4626-deposit} and {IERC4626-redeem} operations.
    function _feeOnTotal(uint256 assets, uint256 feeBasisPoints) private pure returns (uint256) {
        return assets.mulDiv(feeBasisPoints, feeBasisPoints + _BASIS_POINT_SCALE, MathUpgradeable.Rounding.Ceil);
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { IGovernorUpgradeable, GovernorUpgradeable } from "../../../governance/GovernorUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesUpgradeable } from "../../../governance/extensions/GovernorVotesUpgradeable.sol";
import { GovernorVotesQuorumFractionUpgradeable } from "../../../governance/extensions/GovernorVotesQuorumFractionUpgradeable.sol";
import { GovernorTimelockControlUpgradeable } from "../../../governance/extensions/GovernorTimelockControlUpgradeable.sol";
import { TimelockControllerUpgradeable } from "../../../governance/TimelockControllerUpgradeable.sol";
import { IVotesUpgradeable } from "../../../governance/utils/IVotesUpgradeable.sol";
import { IERC165Upgradeable } from "../../../interfaces/IERC165Upgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

contract MyGovernorUpgradeable is
    Initializable, GovernorUpgradeable,
    GovernorCountingSimpleUpgradeable,
    GovernorVotesUpgradeable,
    GovernorVotesQuorumFractionUpgradeable,
    GovernorTimelockControlUpgradeable
{
    function __MyGovernor_init(
        IVotesUpgradeable _token,
        TimelockControllerUpgradeable _timelock
    ) internal onlyInitializing {
        __EIP712_init_unchained("MyGovernor", version());
        __Governor_init_unchained("MyGovernor");
        __GovernorVotes_init_unchained(_token);
        __GovernorVotesQuorumFraction_init_unchained(4);
        __GovernorTimelockControl_init_unchained(_timelock);
    }

    function __MyGovernor_init_unchained(
        IVotesUpgradeable,
        TimelockControllerUpgradeable
    ) internal onlyInitializing {}

    function votingDelay() public pure override returns (uint256) {
        return 7200; // 1 day
    }

    function votingPeriod() public pure override returns (uint256) {
        return 50400; // 1 week
    }

    function proposalThreshold() public pure override returns (uint256) {
        return 0;
    }

    // The functions below are overrides required by Solidity.

    function state(uint256 proposalId) public view override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (ProposalState) {
        return super.state(proposalId);
    }

    function proposalNeedsQueuing(
        uint256 proposalId
    ) public view virtual override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (bool) {
        return super.proposalNeedsQueuing(proposalId);
    }

    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (uint48) {
        return super._queueOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) {
        super._executeOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (uint256) {
        return super._cancel(targets, values, calldatas, descriptionHash);
    }

    function _executor() internal view override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (address) {
        return super._executor();
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../../token/ERC20/ERC20Upgradeable.sol";
import { ERC20PermitUpgradeable } from "../../../token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import { ERC20VotesUpgradeable } from "../../../token/ERC20/extensions/ERC20VotesUpgradeable.sol";
import { NoncesUpgradeable } from "../../../utils/NoncesUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

contract MyTokenTimestampBasedUpgradeable is Initializable, ERC20Upgradeable, ERC20PermitUpgradeable, ERC20VotesUpgradeable {
    function __MyTokenTimestampBased_init() internal onlyInitializing {
        __ERC20_init_unchained("MyTokenTimestampBased", "MTK");
        __EIP712_init_unchained("MyTokenTimestampBased", "1");
        __ERC20Permit_init_unchained("MyTokenTimestampBased");
    }

    function __MyTokenTimestampBased_init_unchained() internal onlyInitializing {}

    // Overrides IERC6372 functions to make the token & governor timestamp-based

    function clock() public view override returns (uint48) {
        return uint48(block.timestamp);
    }

    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() public pure override returns (string memory) {
        return "mode=timestamp";
    }

    // The functions below are overrides required by Solidity.

    function _update(address from, address to, uint256 amount) internal override(ERC20Upgradeable, ERC20VotesUpgradeable) {
        super._update(from, to, amount);
    }

    function nonces(address owner) public view virtual override(ERC20PermitUpgradeable, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../../token/ERC20/ERC20Upgradeable.sol";
import { ERC20PermitUpgradeable } from "../../../token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import { ERC20VotesUpgradeable } from "../../../token/ERC20/extensions/ERC20VotesUpgradeable.sol";
import { NoncesUpgradeable } from "../../../utils/NoncesUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

contract MyTokenUpgradeable is Initializable, ERC20Upgradeable, ERC20PermitUpgradeable, ERC20VotesUpgradeable {
    function __MyToken_init() internal onlyInitializing {
        __ERC20_init_unchained("MyToken", "MTK");
        __EIP712_init_unchained("MyToken", "1");
        __ERC20Permit_init_unchained("MyToken");
    }

    function __MyToken_init_unchained() internal onlyInitializing {}

    // The functions below are overrides required by Solidity.

    function _update(address from, address to, uint256 amount) internal override(ERC20Upgradeable, ERC20VotesUpgradeable) {
        super._update(from, to, amount);
    }

    function nonces(address owner) public view virtual override(ERC20PermitUpgradeable, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { IERC20Upgradeable, ERC20Upgradeable } from "../../../token/ERC20/ERC20Upgradeable.sol";
import { ERC20PermitUpgradeable } from "../../../token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import { ERC20VotesUpgradeable } from "../../../token/ERC20/extensions/ERC20VotesUpgradeable.sol";
import { ERC20WrapperUpgradeable } from "../../../token/ERC20/extensions/ERC20WrapperUpgradeable.sol";
import { NoncesUpgradeable } from "../../../utils/NoncesUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

contract MyTokenWrappedUpgradeable is Initializable, ERC20Upgradeable, ERC20PermitUpgradeable, ERC20VotesUpgradeable, ERC20WrapperUpgradeable {
    function __MyTokenWrapped_init(
        IERC20Upgradeable wrappedToken
    ) internal onlyInitializing {
        __ERC20_init_unchained("MyTokenWrapped", "MTK");
        __EIP712_init_unchained("MyTokenWrapped", "1");
        __ERC20Permit_init_unchained("MyTokenWrapped");
        __ERC20Wrapper_init_unchained(wrappedToken);
    }

    function __MyTokenWrapped_init_unchained(
        IERC20Upgradeable
    ) internal onlyInitializing {}

    // The functions below are overrides required by Solidity.

    function decimals() public view override(ERC20Upgradeable, ERC20WrapperUpgradeable) returns (uint8) {
        return super.decimals();
    }

    function _update(address from, address to, uint256 amount) internal override(ERC20Upgradeable, ERC20VotesUpgradeable) {
        super._update(from, to, amount);
    }

    function nonces(address owner) public view virtual override(ERC20PermitUpgradeable, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../../governance/GovernorUpgradeable.sol";
import { GovernorSettingsUpgradeable } from "../../governance/extensions/GovernorSettingsUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesQuorumFractionUpgradeable } from "../../governance/extensions/GovernorVotesQuorumFractionUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorMockUpgradeable is Initializable, GovernorSettingsUpgradeable, GovernorVotesQuorumFractionUpgradeable, GovernorCountingSimpleUpgradeable {
    function __GovernorMock_init() internal onlyInitializing {
    }

    function __GovernorMock_init_unchained() internal onlyInitializing {
    }
    function proposalThreshold() public view override(GovernorUpgradeable, GovernorSettingsUpgradeable) returns (uint256) {
        return super.proposalThreshold();
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../../governance/GovernorUpgradeable.sol";
import { GovernorPreventLateQuorumUpgradeable } from "../../governance/extensions/GovernorPreventLateQuorumUpgradeable.sol";
import { GovernorSettingsUpgradeable } from "../../governance/extensions/GovernorSettingsUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesUpgradeable } from "../../governance/extensions/GovernorVotesUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorPreventLateQuorumMockUpgradeable is
    Initializable, GovernorSettingsUpgradeable,
    GovernorVotesUpgradeable,
    GovernorCountingSimpleUpgradeable,
    GovernorPreventLateQuorumUpgradeable
{
    uint256 private _quorum;

    function __GovernorPreventLateQuorumMock_init(uint256 quorum_) internal onlyInitializing {
        __GovernorPreventLateQuorumMock_init_unchained(quorum_);
    }

    function __GovernorPreventLateQuorumMock_init_unchained(uint256 quorum_) internal onlyInitializing {
        _quorum = quorum_;
    }

    function quorum(uint256) public view override returns (uint256) {
        return _quorum;
    }

    function proposalDeadline(
        uint256 proposalId
    ) public view override(GovernorUpgradeable, GovernorPreventLateQuorumUpgradeable) returns (uint256) {
        return super.proposalDeadline(proposalId);
    }

    function proposalThreshold() public view override(GovernorUpgradeable, GovernorSettingsUpgradeable) returns (uint256) {
        return super.proposalThreshold();
    }

    function _castVote(
        uint256 proposalId,
        address account,
        uint8 support,
        string memory reason,
        bytes memory params
    ) internal override(GovernorUpgradeable, GovernorPreventLateQuorumUpgradeable) returns (uint256) {
        return super._castVote(proposalId, account, support, reason, params);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.19;

import { IGovernorUpgradeable, GovernorUpgradeable } from "../../governance/GovernorUpgradeable.sol";
import { GovernorTimelockControlUpgradeable } from "../../governance/extensions/GovernorTimelockControlUpgradeable.sol";
import { GovernorSettingsUpgradeable } from "../../governance/extensions/GovernorSettingsUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesQuorumFractionUpgradeable } from "../../governance/extensions/GovernorVotesQuorumFractionUpgradeable.sol";
import { GovernorStorageUpgradeable } from "../../governance/extensions/GovernorStorageUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorStorageMockUpgradeable is
    Initializable, GovernorSettingsUpgradeable,
    GovernorTimelockControlUpgradeable,
    GovernorVotesQuorumFractionUpgradeable,
    GovernorCountingSimpleUpgradeable,
    GovernorStorageUpgradeable
{
    function __GovernorStorageMock_init() internal onlyInitializing {
    }

    function __GovernorStorageMock_init_unchained() internal onlyInitializing {
    }
    function quorum(uint256 blockNumber) public view override(GovernorUpgradeable, GovernorVotesQuorumFractionUpgradeable) returns (uint256) {
        return super.quorum(blockNumber);
    }

    function state(uint256 proposalId) public view override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (ProposalState) {
        return super.state(proposalId);
    }

    function proposalThreshold() public view override(GovernorUpgradeable, GovernorSettingsUpgradeable) returns (uint256) {
        return super.proposalThreshold();
    }

    function proposalNeedsQueuing(
        uint256 proposalId
    ) public view virtual override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (bool) {
        return super.proposalNeedsQueuing(proposalId);
    }

    function _propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description,
        address proposer
    ) internal virtual override(GovernorUpgradeable, GovernorStorageUpgradeable) returns (uint256) {
        return super._propose(targets, values, calldatas, description, proposer);
    }

    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (uint48) {
        return super._queueOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) {
        super._executeOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (uint256) {
        return super._cancel(targets, values, calldatas, descriptionHash);
    }

    function _executor() internal view override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (address) {
        return super._executor();
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IGovernorUpgradeable, GovernorUpgradeable } from "../../governance/GovernorUpgradeable.sol";
import { GovernorTimelockAccessUpgradeable } from "../../governance/extensions/GovernorTimelockAccessUpgradeable.sol";
import { GovernorSettingsUpgradeable } from "../../governance/extensions/GovernorSettingsUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesQuorumFractionUpgradeable } from "../../governance/extensions/GovernorVotesQuorumFractionUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorTimelockAccessMockUpgradeable is
    Initializable, GovernorSettingsUpgradeable,
    GovernorTimelockAccessUpgradeable,
    GovernorVotesQuorumFractionUpgradeable,
    GovernorCountingSimpleUpgradeable
{
    function __GovernorTimelockAccessMock_init() internal onlyInitializing {
    }

    function __GovernorTimelockAccessMock_init_unchained() internal onlyInitializing {
    }
    function nonGovernanceFunction() external {}

    function quorum(uint256 blockNumber) public view override(GovernorUpgradeable, GovernorVotesQuorumFractionUpgradeable) returns (uint256) {
        return super.quorum(blockNumber);
    }

    function proposalThreshold() public view override(GovernorUpgradeable, GovernorSettingsUpgradeable) returns (uint256) {
        return super.proposalThreshold();
    }

    function proposalNeedsQueuing(
        uint256 proposalId
    ) public view virtual override(GovernorUpgradeable, GovernorTimelockAccessUpgradeable) returns (bool) {
        return super.proposalNeedsQueuing(proposalId);
    }

    function propose(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        string memory description
    ) public override(GovernorUpgradeable, GovernorTimelockAccessUpgradeable) returns (uint256) {
        return super.propose(targets, values, calldatas, description);
    }

    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockAccessUpgradeable) returns (uint48) {
        return super._queueOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockAccessUpgradeable) {
        super._executeOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockAccessUpgradeable) returns (uint256) {
        return super._cancel(targets, values, calldatas, descriptionHash);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IGovernorUpgradeable, GovernorUpgradeable } from "../../governance/GovernorUpgradeable.sol";
import { GovernorTimelockCompoundUpgradeable } from "../../governance/extensions/GovernorTimelockCompoundUpgradeable.sol";
import { GovernorSettingsUpgradeable } from "../../governance/extensions/GovernorSettingsUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesQuorumFractionUpgradeable } from "../../governance/extensions/GovernorVotesQuorumFractionUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorTimelockCompoundMockUpgradeable is
    Initializable, GovernorSettingsUpgradeable,
    GovernorTimelockCompoundUpgradeable,
    GovernorVotesQuorumFractionUpgradeable,
    GovernorCountingSimpleUpgradeable
{
    function __GovernorTimelockCompoundMock_init() internal onlyInitializing {
    }

    function __GovernorTimelockCompoundMock_init_unchained() internal onlyInitializing {
    }
    function quorum(uint256 blockNumber) public view override(GovernorUpgradeable, GovernorVotesQuorumFractionUpgradeable) returns (uint256) {
        return super.quorum(blockNumber);
    }

    function state(
        uint256 proposalId
    ) public view override(GovernorUpgradeable, GovernorTimelockCompoundUpgradeable) returns (ProposalState) {
        return super.state(proposalId);
    }

    function proposalThreshold() public view override(GovernorUpgradeable, GovernorSettingsUpgradeable) returns (uint256) {
        return super.proposalThreshold();
    }

    function proposalNeedsQueuing(
        uint256 proposalId
    ) public view virtual override(GovernorUpgradeable, GovernorTimelockCompoundUpgradeable) returns (bool) {
        return super.proposalNeedsQueuing(proposalId);
    }

    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockCompoundUpgradeable) returns (uint48) {
        return super._queueOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockCompoundUpgradeable) {
        super._executeOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockCompoundUpgradeable) returns (uint256) {
        return super._cancel(targets, values, calldatas, descriptionHash);
    }

    function _executor() internal view override(GovernorUpgradeable, GovernorTimelockCompoundUpgradeable) returns (address) {
        return super._executor();
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IGovernorUpgradeable, GovernorUpgradeable } from "../../governance/GovernorUpgradeable.sol";
import { GovernorTimelockControlUpgradeable } from "../../governance/extensions/GovernorTimelockControlUpgradeable.sol";
import { GovernorSettingsUpgradeable } from "../../governance/extensions/GovernorSettingsUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesQuorumFractionUpgradeable } from "../../governance/extensions/GovernorVotesQuorumFractionUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorTimelockControlMockUpgradeable is
    Initializable, GovernorSettingsUpgradeable,
    GovernorTimelockControlUpgradeable,
    GovernorVotesQuorumFractionUpgradeable,
    GovernorCountingSimpleUpgradeable
{
    function __GovernorTimelockControlMock_init() internal onlyInitializing {
    }

    function __GovernorTimelockControlMock_init_unchained() internal onlyInitializing {
    }
    function quorum(uint256 blockNumber) public view override(GovernorUpgradeable, GovernorVotesQuorumFractionUpgradeable) returns (uint256) {
        return super.quorum(blockNumber);
    }

    function state(uint256 proposalId) public view override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (ProposalState) {
        return super.state(proposalId);
    }

    function proposalThreshold() public view override(GovernorUpgradeable, GovernorSettingsUpgradeable) returns (uint256) {
        return super.proposalThreshold();
    }

    function proposalNeedsQueuing(
        uint256 proposalId
    ) public view virtual override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (bool) {
        return super.proposalNeedsQueuing(proposalId);
    }

    function _queueOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (uint48) {
        return super._queueOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _executeOperations(
        uint256 proposalId,
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) {
        super._executeOperations(proposalId, targets, values, calldatas, descriptionHash);
    }

    function _cancel(
        address[] memory targets,
        uint256[] memory values,
        bytes[] memory calldatas,
        bytes32 descriptionHash
    ) internal override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (uint256) {
        return super._cancel(targets, values, calldatas, descriptionHash);
    }

    function _executor() internal view override(GovernorUpgradeable, GovernorTimelockControlUpgradeable) returns (address) {
        return super._executor();
    }

    function nonGovernanceFunction() external {}
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesUpgradeable } from "../../governance/extensions/GovernorVotesUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorVoteMocksUpgradeable is Initializable, GovernorVotesUpgradeable, GovernorCountingSimpleUpgradeable {
    function __GovernorVoteMocks_init() internal onlyInitializing {
    }

    function __GovernorVoteMocks_init_unchained() internal onlyInitializing {
    }
    function quorum(uint256) public pure override returns (uint256) {
        return 0;
    }

    function votingDelay() public pure override returns (uint256) {
        return 4;
    }

    function votingPeriod() public pure override returns (uint256) {
        return 16;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { GovernorUpgradeable } from "../../governance/GovernorUpgradeable.sol";
import { GovernorCountingSimpleUpgradeable } from "../../governance/extensions/GovernorCountingSimpleUpgradeable.sol";
import { GovernorVotesUpgradeable } from "../../governance/extensions/GovernorVotesUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract GovernorWithParamsMockUpgradeable is Initializable, GovernorVotesUpgradeable, GovernorCountingSimpleUpgradeable {
    event CountParams(uint256 uintParam, string strParam);

    function __GovernorWithParamsMock_init() internal onlyInitializing {
    }

    function __GovernorWithParamsMock_init_unchained() internal onlyInitializing {
    }
    function quorum(uint256) public pure override returns (uint256) {
        return 0;
    }

    function votingDelay() public pure override returns (uint256) {
        return 4;
    }

    function votingPeriod() public pure override returns (uint256) {
        return 16;
    }

    function _getVotes(
        address account,
        uint256 blockNumber,
        bytes memory params
    ) internal view override(GovernorUpgradeable, GovernorVotesUpgradeable) returns (uint256) {
        uint256 reduction = 0;
        // If the user provides parameters, we reduce the voting weight by the amount of the integer param
        if (params.length > 0) {
            (reduction, ) = abi.decode(params, (uint256, string));
        }
        // reverts on overflow
        return super._getVotes(account, blockNumber, params) - reduction;
    }

    function _countVote(
        uint256 proposalId,
        address account,
        uint8 support,
        uint256 weight,
        bytes memory params
    ) internal override(GovernorUpgradeable, GovernorCountingSimpleUpgradeable) {
        if (params.length > 0) {
            (uint256 _uintParam, string memory _strParam) = abi.decode(params, (uint256, string));
            emit CountParams(_uintParam, _strParam);
        }
        return super._countVote(proposalId, account, support, weight, params);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../../proxy/utils/Initializable.sol";

contract BadBeaconNoImplUpgradeable is Initializable {    function __BadBeaconNoImpl_init() internal onlyInitializing {
    }

    function __BadBeaconNoImpl_init_unchained() internal onlyInitializing {
    }
}

contract BadBeaconNotContractUpgradeable is Initializable {
    function __BadBeaconNotContract_init() internal onlyInitializing {
    }

    function __BadBeaconNotContract_init_unchained() internal onlyInitializing {
    }
    function implementation() external pure returns (address) {
        return address(0x1);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation contract with a payable changeAdmin(address) function made to clash with
 * TransparentUpgradeableProxy's to test correct functioning of the Transparent Proxy feature.
 */
contract ClashingImplementationUpgradeable is Initializable {
    event ClashingImplementationCall();

    function __ClashingImplementation_init() internal onlyInitializing {
    }

    function __ClashingImplementation_init_unchained() internal onlyInitializing {
    }
    function upgradeToAndCall(address, bytes calldata) external payable {
        emit ClashingImplementationCall();
    }

    function delegatedFunction() external pure returns (bool) {
        return true;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { UUPSUpgradeable } from "../../proxy/utils/UUPSUpgradeable.sol";
import { ERC1967UtilsUpgradeable } from "../../proxy/ERC1967/ERC1967UtilsUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract NonUpgradeableMockUpgradeable is Initializable {
    uint256 internal _counter;

    function __NonUpgradeableMock_init() internal onlyInitializing {
    }

    function __NonUpgradeableMock_init_unchained() internal onlyInitializing {
    }
    function current() external view returns (uint256) {
        return _counter;
    }

    function increment() external {
        ++_counter;
    }
}

contract UUPSUpgradeableMockUpgradeable is Initializable, NonUpgradeableMockUpgradeable, UUPSUpgradeable {
    function __UUPSUpgradeableMock_init() internal onlyInitializing {
    }

    function __UUPSUpgradeableMock_init_unchained() internal onlyInitializing {
    }
    // Not having any checks in this function is dangerous! Do not do this outside tests!
    function _authorizeUpgrade(address) internal override {}
}

contract UUPSUpgradeableUnsafeMockUpgradeable is Initializable, UUPSUpgradeableMockUpgradeable {
    function __UUPSUpgradeableUnsafeMock_init() internal onlyInitializing {
    }

    function __UUPSUpgradeableUnsafeMock_init_unchained() internal onlyInitializing {
    }
    function upgradeToAndCall(address newImplementation, bytes memory data) public payable override {
        ERC1967UtilsUpgradeable.upgradeToAndCall(newImplementation, data);
    }
}

contract UUPSUnsupportedProxiableUUIDUpgradeable is Initializable, UUPSUpgradeableMockUpgradeable {
    function __UUPSUnsupportedProxiableUUID_init() internal onlyInitializing {
    }

    function __UUPSUnsupportedProxiableUUID_init_unchained() internal onlyInitializing {
    }
    function proxiableUUID() external pure override returns (bytes32) {
        return keccak256("invalid UUID");
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IERC1155ReceiverUpgradeable } from "../../token/ERC1155/IERC1155ReceiverUpgradeable.sol";
import { ERC165Upgradeable } from "../../utils/introspection/ERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract ERC1155ReceiverMockUpgradeable is Initializable, ERC165Upgradeable, IERC1155ReceiverUpgradeable {
    enum RevertType {
        None,
        RevertWithoutMessage,
        RevertWithMessage,
        RevertWithCustomError,
        Panic
    }

    bytes4 private _recRetval;
    bytes4 private _batRetval;
    RevertType private _error;

    event Received(address operator, address from, uint256 id, uint256 value, bytes data, uint256 gas);
    event BatchReceived(address operator, address from, uint256[] ids, uint256[] values, bytes data, uint256 gas);
    error CustomError(bytes4);

    function __ERC1155ReceiverMock_init(bytes4 recRetval, bytes4 batRetval, RevertType error) internal onlyInitializing {
        __ERC1155ReceiverMock_init_unchained(recRetval, batRetval, error);
    }

    function __ERC1155ReceiverMock_init_unchained(bytes4 recRetval, bytes4 batRetval, RevertType error) internal onlyInitializing {
        _recRetval = recRetval;
        _batRetval = batRetval;
        _error = error;
    }

    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4) {
        if (_error == RevertType.RevertWithoutMessage) {
            revert();
        } else if (_error == RevertType.RevertWithMessage) {
            revert("ERC1155ReceiverMock: reverting on receive");
        } else if (_error == RevertType.RevertWithCustomError) {
            revert CustomError(_recRetval);
        } else if (_error == RevertType.Panic) {
            uint256 a = uint256(0) / uint256(0);
            a;
        }

        emit Received(operator, from, id, value, data, gasleft());
        return _recRetval;
    }

    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4) {
        if (_error == RevertType.RevertWithoutMessage) {
            revert();
        } else if (_error == RevertType.RevertWithMessage) {
            revert("ERC1155ReceiverMock: reverting on batch receive");
        } else if (_error == RevertType.RevertWithCustomError) {
            revert CustomError(_recRetval);
        } else if (_error == RevertType.Panic) {
            uint256 a = uint256(0) / uint256(0);
            a;
        }

        emit BatchReceived(operator, from, ids, values, data, gasleft());
        return _batRetval;
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC20ApprovalMockUpgradeable is Initializable, ERC20Upgradeable {
    function __ERC20ApprovalMock_init() internal onlyInitializing {
    }

    function __ERC20ApprovalMock_init_unchained() internal onlyInitializing {
    }
    function _approve(address owner, address spender, uint256 amount, bool) internal virtual override {
        super._approve(owner, spender, amount, true);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC20DecimalsMockUpgradeable is Initializable, ERC20Upgradeable {
    uint8 private _decimals;

    function __ERC20DecimalsMock_init(uint8 decimals_) internal onlyInitializing {
        __ERC20DecimalsMock_init_unchained(decimals_);
    }

    function __ERC20DecimalsMock_init_unchained(uint8 decimals_) internal onlyInitializing {
        _decimals = decimals_;
    }

    function decimals() public view override returns (uint8) {
        return _decimals;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;
import "../../proxy/utils/Initializable.sol";

contract ERC20ExcessDecimalsMockUpgradeable is Initializable {
    function __ERC20ExcessDecimalsMock_init() internal onlyInitializing {
    }

    function __ERC20ExcessDecimalsMock_init_unchained() internal onlyInitializing {
    }
    function decimals() public pure returns (uint256) {
        return type(uint256).max;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20FlashMintUpgradeable } from "../../token/ERC20/extensions/ERC20FlashMintUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC20FlashMintMockUpgradeable is Initializable, ERC20FlashMintUpgradeable {
    uint256 _flashFeeAmount;
    address _flashFeeReceiverAddress;

    function __ERC20FlashMintMock_init() internal onlyInitializing {
    }

    function __ERC20FlashMintMock_init_unchained() internal onlyInitializing {
    }
    function setFlashFee(uint256 amount) public {
        _flashFeeAmount = amount;
    }

    function _flashFee(address, uint256) internal view override returns (uint256) {
        return _flashFeeAmount;
    }

    function setFlashFeeReceiver(address receiver) public {
        _flashFeeReceiverAddress = receiver;
    }

    function _flashFeeReceiver() internal view override returns (address) {
        return _flashFeeReceiverAddress;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

// contract that replicate USDT (0xdac17f958d2ee523a2206206994597c13d831ec7) approval beavior
abstract contract ERC20ForceApproveMockUpgradeable is Initializable, ERC20Upgradeable {
    function __ERC20ForceApproveMock_init() internal onlyInitializing {
    }

    function __ERC20ForceApproveMock_init_unchained() internal onlyInitializing {
    }
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        require(amount == 0 || allowance(msg.sender, spender) == 0, "USDT approval failure");
        return super.approve(spender, amount);
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract ERC20MockUpgradeable is Initializable, ERC20Upgradeable {
    function __ERC20Mock_init() internal onlyInitializing {
        __ERC20_init_unchained("ERC20Mock", "E20M");
    }

    function __ERC20Mock_init_unchained() internal onlyInitializing {}

    function mint(address account, uint256 amount) external {
        _mint(account, amount);
    }

    function burn(address account, uint256 amount) external {
        _burn(account, amount);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import { MulticallUpgradeable } from "../../utils/MulticallUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC20MulticallMockUpgradeable is Initializable, ERC20Upgradeable, MulticallUpgradeable {    function __ERC20MulticallMock_init() internal onlyInitializing {
    }

    function __ERC20MulticallMock_init_unchained() internal onlyInitializing {
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC20NoReturnMockUpgradeable is Initializable, ERC20Upgradeable {
    function __ERC20NoReturnMock_init() internal onlyInitializing {
    }

    function __ERC20NoReturnMock_init_unchained() internal onlyInitializing {
    }
    function transfer(address to, uint256 amount) public override returns (bool) {
        super.transfer(to, amount);
        assembly {
            return(0, 0)
        }
    }

    function transferFrom(address from, address to, uint256 amount) public override returns (bool) {
        super.transferFrom(from, to, amount);
        assembly {
            return(0, 0)
        }
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        super.approve(spender, amount);
        assembly {
            return(0, 0)
        }
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import { AddressUpgradeable } from "../../utils/AddressUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract ERC20ReentrantUpgradeable is Initializable, ERC20Upgradeable {
    enum Type {
        No,
        Before,
        After
    }

    Type private _reenterType;
    address private _reenterTarget;
    bytes private _reenterData;

    function __ERC20Reentrant_init() internal onlyInitializing {
        __ERC20_init_unchained("TEST", "TST");
    }

    function __ERC20Reentrant_init_unchained() internal onlyInitializing {
    }
    function scheduleReenter(Type when, address target, bytes calldata data) external {
        _reenterType = when;
        _reenterTarget = target;
        _reenterData = data;
    }

    function functionCall(address target, bytes memory data) public returns (bytes memory) {
        return AddressUpgradeable.functionCall(target, data);
    }

    function _update(address from, address to, uint256 amount) internal override {
        if (_reenterType == Type.Before) {
            _reenterType = Type.No;
            functionCall(_reenterTarget, _reenterData);
        }
        super._update(from, to, amount);
        if (_reenterType == Type.After) {
            _reenterType = Type.No;
            functionCall(_reenterTarget, _reenterData);
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC20ReturnFalseMockUpgradeable is Initializable, ERC20Upgradeable {
    function __ERC20ReturnFalseMock_init() internal onlyInitializing {
    }

    function __ERC20ReturnFalseMock_init_unchained() internal onlyInitializing {
    }
    function transfer(address, uint256) public pure override returns (bool) {
        return false;
    }

    function transferFrom(address, address, uint256) public pure override returns (bool) {
        return false;
    }

    function approve(address, uint256) public pure override returns (bool) {
        return false;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20PermitUpgradeable } from "../../token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import { MathUpgradeable } from "../../utils/math/MathUpgradeable.sol";
import { IVotesUpgradeable } from "../../governance/utils/IVotesUpgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import { ECDSAUpgradeable } from "../../utils/cryptography/ECDSAUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Copied from the master branch at commit 86de1e8b6c3fa6b4efa4a5435869d2521be0f5f5
 */
abstract contract ERC20VotesLegacyMockUpgradeable is Initializable, IVotesUpgradeable, ERC20PermitUpgradeable {
    struct Checkpoint {
        uint32 fromBlock;
        uint224 votes;
    }

    bytes32 private constant _DELEGATION_TYPEHASH =
        keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    mapping(address account => address) private _delegatee;
    mapping(address delegatee => Checkpoint[]) private _checkpoints;
    Checkpoint[] private _totalSupplyCheckpoints;

    function __ERC20VotesLegacyMock_init() internal onlyInitializing {
    }

    function __ERC20VotesLegacyMock_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Get the `pos`-th checkpoint for `account`.
     */
    function checkpoints(address account, uint32 pos) public view virtual returns (Checkpoint memory) {
        return _checkpoints[account][pos];
    }

    /**
     * @dev Get number of checkpoints for `account`.
     */
    function numCheckpoints(address account) public view virtual returns (uint32) {
        return SafeCastUpgradeable.toUint32(_checkpoints[account].length);
    }

    /**
     * @dev Get the address `account` is currently delegating to.
     */
    function delegates(address account) public view virtual returns (address) {
        return _delegatee[account];
    }

    /**
     * @dev Gets the current votes balance for `account`
     */
    function getVotes(address account) public view virtual returns (uint256) {
        uint256 pos = _checkpoints[account].length;
        unchecked {
            return pos == 0 ? 0 : _checkpoints[account][pos - 1].votes;
        }
    }

    /**
     * @dev Retrieve the number of votes for `account` at the end of `blockNumber`.
     *
     * Requirements:
     *
     * - `blockNumber` must have been already mined
     */
    function getPastVotes(address account, uint256 blockNumber) public view virtual returns (uint256) {
        require(blockNumber < block.number, "ERC20Votes: block not yet mined");
        return _checkpointsLookup(_checkpoints[account], blockNumber);
    }

    /**
     * @dev Retrieve the `totalSupply` at the end of `blockNumber`. Note, this value is the sum of all balances.
     * It is NOT the sum of all the delegated votes!
     *
     * Requirements:
     *
     * - `blockNumber` must have been already mined
     */
    function getPastTotalSupply(uint256 blockNumber) public view virtual returns (uint256) {
        require(blockNumber < block.number, "ERC20Votes: block not yet mined");
        return _checkpointsLookup(_totalSupplyCheckpoints, blockNumber);
    }

    /**
     * @dev Lookup a value in a list of (sorted) checkpoints.
     */
    function _checkpointsLookup(Checkpoint[] storage ckpts, uint256 blockNumber) private view returns (uint256) {
        // We run a binary search to look for the earliest checkpoint taken after `blockNumber`.
        //
        // Initially we check if the block is recent to narrow the search range.
        // During the loop, the index of the wanted checkpoint remains in the range [low-1, high).
        // With each iteration, either `low` or `high` is moved towards the middle of the range to maintain the
        // invariant.
        // - If the middle checkpoint is after `blockNumber`, we look in [low, mid)
        // - If the middle checkpoint is before or equal to `blockNumber`, we look in [mid+1, high)
        // Once we reach a single value (when low == high), we've found the right checkpoint at the index high-1, if not
        // out of bounds (in which case we're looking too far in the past and the result is 0).
        // Note that if the latest checkpoint available is exactly for `blockNumber`, we end up with an index that is
        // past the end of the array, so we technically don't find a checkpoint after `blockNumber`, but it works out
        // the same.
        uint256 length = ckpts.length;

        uint256 low = 0;
        uint256 high = length;

        if (length > 5) {
            uint256 mid = length - MathUpgradeable.sqrt(length);
            if (_unsafeAccess(ckpts, mid).fromBlock > blockNumber) {
                high = mid;
            } else {
                low = mid + 1;
            }
        }

        while (low < high) {
            uint256 mid = MathUpgradeable.average(low, high);
            if (_unsafeAccess(ckpts, mid).fromBlock > blockNumber) {
                high = mid;
            } else {
                low = mid + 1;
            }
        }

        unchecked {
            return high == 0 ? 0 : _unsafeAccess(ckpts, high - 1).votes;
        }
    }

    /**
     * @dev Delegate votes from the sender to `delegatee`.
     */
    function delegate(address delegatee) public virtual {
        _delegate(_msgSender(), delegatee);
    }

    /**
     * @dev Delegates votes from signer to `delegatee`
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(block.timestamp <= expiry, "ERC20Votes: signature expired");
        address signer = ECDSAUpgradeable.recover(
            _hashTypedDataV4(keccak256(abi.encode(_DELEGATION_TYPEHASH, delegatee, nonce, expiry))),
            v,
            r,
            s
        );
        require(nonce == _useNonce(signer), "ERC20Votes: invalid nonce");
        _delegate(signer, delegatee);
    }

    /**
     * @dev Maximum token supply. Defaults to `type(uint224).max` (2^224^ - 1).
     */
    function _maxSupply() internal view virtual returns (uint224) {
        return type(uint224).max;
    }

    /**
     * @dev Move voting power when tokens are transferred.
     *
     * Emits a {IVotes-DelegateVotesChanged} event.
     */
    function _update(address from, address to, uint256 amount) internal virtual override {
        super._update(from, to, amount);

        if (from == address(0)) {
            require(totalSupply() <= _maxSupply(), "ERC20Votes: total supply risks overflowing votes");
            _writeCheckpoint(_totalSupplyCheckpoints, _add, amount);
        }

        if (to == address(0)) {
            _writeCheckpoint(_totalSupplyCheckpoints, _subtract, amount);
        }

        _moveVotingPower(delegates(from), delegates(to), amount);
    }

    /**
     * @dev Change delegation for `delegator` to `delegatee`.
     *
     * Emits events {IVotes-DelegateChanged} and {IVotes-DelegateVotesChanged}.
     */
    function _delegate(address delegator, address delegatee) internal virtual {
        address currentDelegate = delegates(delegator);
        uint256 delegatorBalance = balanceOf(delegator);
        _delegatee[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveVotingPower(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveVotingPower(address src, address dst, uint256 amount) private {
        if (src != dst && amount > 0) {
            if (src != address(0)) {
                (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[src], _subtract, amount);
                emit DelegateVotesChanged(src, oldWeight, newWeight);
            }

            if (dst != address(0)) {
                (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[dst], _add, amount);
                emit DelegateVotesChanged(dst, oldWeight, newWeight);
            }
        }
    }

    function _writeCheckpoint(
        Checkpoint[] storage ckpts,
        function(uint256, uint256) view returns (uint256) op,
        uint256 delta
    ) private returns (uint256 oldWeight, uint256 newWeight) {
        uint256 pos = ckpts.length;

        unchecked {
            Checkpoint memory oldCkpt = pos == 0 ? Checkpoint(0, 0) : _unsafeAccess(ckpts, pos - 1);

            oldWeight = oldCkpt.votes;
            newWeight = op(oldWeight, delta);

            if (pos > 0 && oldCkpt.fromBlock == block.number) {
                _unsafeAccess(ckpts, pos - 1).votes = SafeCastUpgradeable.toUint224(newWeight);
            } else {
                ckpts.push(
                    Checkpoint({fromBlock: SafeCastUpgradeable.toUint32(block.number), votes: SafeCastUpgradeable.toUint224(newWeight)})
                );
            }
        }
    }

    function _add(uint256 a, uint256 b) private pure returns (uint256) {
        return a + b;
    }

    function _subtract(uint256 a, uint256 b) private pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Access an element of the array without performing bounds check. The position is assumed to be within bounds.
     */
    function _unsafeAccess(Checkpoint[] storage ckpts, uint256 pos) private pure returns (Checkpoint storage result) {
        assembly {
            mstore(0, ckpts.slot)
            result.slot := add(keccak256(0, 0x20), pos)
        }
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC4626Upgradeable } from "../../token/ERC20/extensions/ERC4626Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC4626LimitsMockUpgradeable is Initializable, ERC4626Upgradeable {
    uint256 _maxDeposit;
    uint256 _maxMint;

    function __ERC4626LimitsMock_init() internal onlyInitializing {
        __ERC4626LimitsMock_init_unchained();
    }

    function __ERC4626LimitsMock_init_unchained() internal onlyInitializing {
        _maxDeposit = 100 ether;
        _maxMint = 100 ether;
    }

    function maxDeposit(address) public view override returns (uint256) {
        return _maxDeposit;
    }

    function maxMint(address) public view override returns (uint256) {
        return _maxMint;
    }
}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import { IERC20Upgradeable, ERC20Upgradeable } from "../../token/ERC20/ERC20Upgradeable.sol";
import { ERC4626Upgradeable } from "../../token/ERC20/extensions/ERC4626Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract ERC4626MockUpgradeable is Initializable, ERC4626Upgradeable {
    function __ERC4626Mock_init(address underlying) internal onlyInitializing {
        __ERC20_init_unchained("ERC4626Mock", "E4626M");
        __ERC4626_init_unchained(IERC20Upgradeable(underlying));
    }

    function __ERC4626Mock_init_unchained(address) internal onlyInitializing {}

    function mint(address account, uint256 amount) external {
        _mint(account, amount);
    }

    function burn(address account, uint256 amount) external {
        _burn(account, amount);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC4626Upgradeable } from "../../token/ERC20/extensions/ERC4626Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC4626OffsetMockUpgradeable is Initializable, ERC4626Upgradeable {
    uint8 private _offset;

    function __ERC4626OffsetMock_init(uint8 offset_) internal onlyInitializing {
        __ERC4626OffsetMock_init_unchained(offset_);
    }

    function __ERC4626OffsetMock_init_unchained(uint8 offset_) internal onlyInitializing {
        _offset = offset_;
    }

    function _decimalsOffset() internal view virtual override returns (uint8) {
        return _offset;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC4626FeesUpgradeable } from "../docs/ERC4626FeesUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC4626FeesMockUpgradeable is Initializable, ERC4626FeesUpgradeable {
    uint256 private _entryFeeBasisPointValue;
    address private _entryFeeRecipientValue;
    uint256 private _exitFeeBasisPointValue;
    address private _exitFeeRecipientValue;

    function __ERC4626FeesMock_init(
        uint256 entryFeeBasisPoints,
        address entryFeeRecipient,
        uint256 exitFeeBasisPoints,
        address exitFeeRecipient
    ) internal onlyInitializing {
        __ERC4626FeesMock_init_unchained(entryFeeBasisPoints, entryFeeRecipient, exitFeeBasisPoints, exitFeeRecipient);
    }

    function __ERC4626FeesMock_init_unchained(
        uint256 entryFeeBasisPoints,
        address entryFeeRecipient,
        uint256 exitFeeBasisPoints,
        address exitFeeRecipient
    ) internal onlyInitializing {
        _entryFeeBasisPointValue = entryFeeBasisPoints;
        _entryFeeRecipientValue = entryFeeRecipient;
        _exitFeeBasisPointValue = exitFeeBasisPoints;
        _exitFeeRecipientValue = exitFeeRecipient;
    }

    function _entryFeeBasisPoints() internal view virtual override returns (uint256) {
        return _entryFeeBasisPointValue;
    }

    function _entryFeeRecipient() internal view virtual override returns (address) {
        return _entryFeeRecipientValue;
    }

    function _exitFeeBasisPoints() internal view virtual override returns (uint256) {
        return _exitFeeBasisPointValue;
    }

    function _exitFeeRecipient() internal view virtual override returns (address) {
        return _exitFeeRecipientValue;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC721Upgradeable } from "../../token/ERC721/ERC721Upgradeable.sol";
import { ERC721ConsecutiveUpgradeable } from "../../token/ERC721/extensions/ERC721ConsecutiveUpgradeable.sol";
import { ERC721EnumerableUpgradeable } from "../../token/ERC721/extensions/ERC721EnumerableUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract ERC721ConsecutiveEnumerableMockUpgradeable is Initializable, ERC721ConsecutiveUpgradeable, ERC721EnumerableUpgradeable {
    function __ERC721ConsecutiveEnumerableMock_init(
        string memory name,
        string memory symbol,
        address[] memory receivers,
        uint96[] memory amounts
    ) internal onlyInitializing {
        __ERC721_init_unchained(name, symbol);
        __ERC721ConsecutiveEnumerableMock_init_unchained(name, symbol, receivers, amounts);
    }

    function __ERC721ConsecutiveEnumerableMock_init_unchained(
        string memory,
        string memory,
        address[] memory receivers,
        uint96[] memory amounts
    ) internal onlyInitializing {
        for (uint256 i = 0; i < receivers.length; ++i) {
            _mintConsecutive(receivers[i], amounts[i]);
        }
    }

    function supportsInterface(
        bytes4 interfaceId
    ) public view virtual override(ERC721Upgradeable, ERC721EnumerableUpgradeable) returns (bool) {
        return super.supportsInterface(interfaceId);
    }

    function _ownerOf(uint256 tokenId) internal view virtual override(ERC721Upgradeable, ERC721ConsecutiveUpgradeable) returns (address) {
        return super._ownerOf(tokenId);
    }

    function _update(
        address to,
        uint256 tokenId,
        address auth
    ) internal virtual override(ERC721ConsecutiveUpgradeable, ERC721EnumerableUpgradeable) returns (address) {
        return super._update(to, tokenId, auth);
    }

    function _increaseBalance(address account, uint128 amount) internal virtual override(ERC721Upgradeable, ERC721EnumerableUpgradeable) {
        super._increaseBalance(account, amount);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC721Upgradeable } from "../../token/ERC721/ERC721Upgradeable.sol";
import { ERC721ConsecutiveUpgradeable } from "../../token/ERC721/extensions/ERC721ConsecutiveUpgradeable.sol";
import { ERC721PausableUpgradeable } from "../../token/ERC721/extensions/ERC721PausableUpgradeable.sol";
import { ERC721VotesUpgradeable } from "../../token/ERC721/extensions/ERC721VotesUpgradeable.sol";
import { EIP712Upgradeable } from "../../utils/cryptography/EIP712Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @title ERC721ConsecutiveMock
 */
contract ERC721ConsecutiveMockUpgradeable is Initializable, ERC721ConsecutiveUpgradeable, ERC721PausableUpgradeable, ERC721VotesUpgradeable {
    uint96 private _offset;

    function __ERC721ConsecutiveMock_init(
        string memory name,
        string memory symbol,
        uint96 offset,
        address[] memory delegates,
        address[] memory receivers,
        uint96[] memory amounts
    ) internal onlyInitializing {
        __ERC721_init_unchained(name, symbol);
        __Pausable_init_unchained();
        __EIP712_init_unchained(name, "1");
        __ERC721ConsecutiveMock_init_unchained(name, symbol, offset, delegates, receivers, amounts);
    }

    function __ERC721ConsecutiveMock_init_unchained(
        string memory,
        string memory,
        uint96 offset,
        address[] memory delegates,
        address[] memory receivers,
        uint96[] memory amounts
    ) internal onlyInitializing {
        _offset = offset;

        for (uint256 i = 0; i < delegates.length; ++i) {
            _delegate(delegates[i], delegates[i]);
        }

        for (uint256 i = 0; i < receivers.length; ++i) {
            _mintConsecutive(receivers[i], amounts[i]);
        }
    }

    function _firstConsecutiveId() internal view virtual override returns (uint96) {
        return _offset;
    }

    function _ownerOf(uint256 tokenId) internal view virtual override(ERC721Upgradeable, ERC721ConsecutiveUpgradeable) returns (address) {
        return super._ownerOf(tokenId);
    }

    function _update(
        address to,
        uint256 tokenId,
        address auth
    ) internal virtual override(ERC721ConsecutiveUpgradeable, ERC721PausableUpgradeable, ERC721VotesUpgradeable) returns (address) {
        return super._update(to, tokenId, auth);
    }

    function _increaseBalance(address account, uint128 amount) internal virtual override(ERC721Upgradeable, ERC721VotesUpgradeable) {
        super._increaseBalance(account, amount);
    }
}

contract ERC721ConsecutiveNoConstructorMintMockUpgradeable is Initializable, ERC721ConsecutiveUpgradeable {
    function __ERC721ConsecutiveNoConstructorMintMock_init(string memory name, string memory symbol) internal onlyInitializing {
        __ERC721_init_unchained(name, symbol);
        __ERC721ConsecutiveNoConstructorMintMock_init_unchained(name, symbol);
    }

    function __ERC721ConsecutiveNoConstructorMintMock_init_unchained(string memory, string memory) internal onlyInitializing {
        _mint(msg.sender, 0);
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IERC721ReceiverUpgradeable } from "../../token/ERC721/IERC721ReceiverUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

contract ERC721ReceiverMockUpgradeable is Initializable, IERC721ReceiverUpgradeable {
    enum RevertType {
        None,
        RevertWithoutMessage,
        RevertWithMessage,
        RevertWithCustomError,
        Panic
    }

    bytes4 private _retval;
    RevertType private _error;

    event Received(address operator, address from, uint256 tokenId, bytes data, uint256 gas);
    error CustomError(bytes4);

    function __ERC721ReceiverMock_init(bytes4 retval, RevertType error) internal onlyInitializing {
        __ERC721ReceiverMock_init_unchained(retval, error);
    }

    function __ERC721ReceiverMock_init_unchained(bytes4 retval, RevertType error) internal onlyInitializing {
        _retval = retval;
        _error = error;
    }

    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes memory data
    ) public returns (bytes4) {
        if (_error == RevertType.RevertWithoutMessage) {
            revert();
        } else if (_error == RevertType.RevertWithMessage) {
            revert("ERC721ReceiverMock: reverting");
        } else if (_error == RevertType.RevertWithCustomError) {
            revert CustomError(_retval);
        } else if (_error == RevertType.Panic) {
            uint256 a = uint256(0) / uint256(0);
            a;
        }

        emit Received(operator, from, tokenId, data, gasleft());
        return _retval;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC721URIStorageUpgradeable } from "../../token/ERC721/extensions/ERC721URIStorageUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC721URIStorageMockUpgradeable is Initializable, ERC721URIStorageUpgradeable {
    string private _baseTokenURI;

    function __ERC721URIStorageMock_init() internal onlyInitializing {
    }

    function __ERC721URIStorageMock_init_unchained() internal onlyInitializing {
    }
    function _baseURI() internal view virtual override returns (string memory) {
        return _baseTokenURI;
    }

    function setBaseURI(string calldata newBaseTokenURI) public {
        _baseTokenURI = newBaseTokenURI;
    }
}


// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ERC20VotesUpgradeable } from "../../token/ERC20/extensions/ERC20VotesUpgradeable.sol";
import { ERC721VotesUpgradeable } from "../../token/ERC721/extensions/ERC721VotesUpgradeable.sol";
import { SafeCastUpgradeable } from "../../utils/math/SafeCastUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

abstract contract ERC20VotesTimestampMockUpgradeable is Initializable, ERC20VotesUpgradeable {
    function __ERC20VotesTimestampMock_init() internal onlyInitializing {
    }

    function __ERC20VotesTimestampMock_init_unchained() internal onlyInitializing {
    }
    function clock() public view virtual override returns (uint48) {
        return SafeCastUpgradeable.toUint48(block.timestamp);
    }

    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() public view virtual override returns (string memory) {
        return "mode=timestamp";
    }
}

abstract contract ERC721VotesTimestampMockUpgradeable is Initializable, ERC721VotesUpgradeable {
    function __ERC721VotesTimestampMock_init() internal onlyInitializing {
    }

    function __ERC721VotesTimestampMock_init_unchained() internal onlyInitializing {
    }
    function clock() public view virtual override returns (uint48) {
        return SafeCastUpgradeable.toUint48(block.timestamp);
    }

    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() public view virtual override returns (string memory) {
        return "mode=timestamp";
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/Clones.sol)

pragma solidity ^0.8.20;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for
 * deploying minimal proxy contracts, also known as "clones".
 *
 * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
 * > a minimal bytecode implementation that delegates all calls to a known, fixed address.
 *
 * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
 * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
 * deterministic method.
 */
library ClonesUpgradeable {
    /**
     * @dev A clone instance deployment failed.
     */
    error ERC1167FailedCreateClone();

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create opcode, which should never revert.
     */
    function clone(address implementation) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes
            // of the `implementation` address with the bytecode before the address.
            mstore(0x00, or(shr(0xe8, shl(0x60, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))
            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.
            mstore(0x20, or(shl(0x78, implementation), 0x5af43d82803e903d91602b57fd5bf3))
            instance := create(0, 0x09, 0x37)
        }
        if (instance == address(0)) {
            revert ERC1167FailedCreateClone();
        }
    }

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create2 opcode and a `salt` to deterministically deploy
     * the clone. Using the same `implementation` and `salt` multiple time will revert, since
     * the clones cannot be deployed twice at the same address.
     */
    function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes
            // of the `implementation` address with the bytecode before the address.
            mstore(0x00, or(shr(0xe8, shl(0x60, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))
            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.
            mstore(0x20, or(shl(0x78, implementation), 0x5af43d82803e903d91602b57fd5bf3))
            instance := create2(0, 0x09, 0x37, salt)
        }
        if (instance == address(0)) {
            revert ERC1167FailedCreateClone();
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(
        address implementation,
        bytes32 salt,
        address deployer
    ) internal pure returns (address predicted) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(add(ptr, 0x38), deployer)
            mstore(add(ptr, 0x24), 0x5af43d82803e903d91602b57fd5bf3ff)
            mstore(add(ptr, 0x14), implementation)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73)
            mstore(add(ptr, 0x58), salt)
            mstore(add(ptr, 0x78), keccak256(add(ptr, 0x0c), 0x37))
            predicted := keccak256(add(ptr, 0x43), 0x55)
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(
        address implementation,
        bytes32 salt
    ) internal view returns (address predicted) {
        return predictDeterministicAddress(implementation, salt, address(this));
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/ERC1967/ERC1967Utils.sol)

pragma solidity ^0.8.20;

import { IBeaconUpgradeable } from "../beacon/IBeaconUpgradeable.sol";
import { AddressUpgradeable } from "../../utils/AddressUpgradeable.sol";
import { StorageSlotUpgradeable } from "../../utils/StorageSlotUpgradeable.sol";

/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 */
library ERC1967UtilsUpgradeable {
    // We re-declare ERC-1967 events here because they can't be used directly from IERC1967.
    // This will be fixed in Solidity 0.8.21. At that point we should remove these events.
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);

    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);

    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);

    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();

    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlotUpgradeable.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlotUpgradeable.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);

        if (data.length > 0) {
            AddressUpgradeable.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlotUpgradeable.getAddressSlot(ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlotUpgradeable.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlotUpgradeable.getAddressSlot(BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }

        StorageSlotUpgradeable.getAddressSlot(BEACON_SLOT).value = newBeacon;

        address beaconImplementation = IBeaconUpgradeable(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }

    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);

        if (data.length > 0) {
            AddressUpgradeable.functionDelegateCall(IBeaconUpgradeable(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeaconUpgradeable {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/UUPSUpgradeable.sol)

pragma solidity ^0.8.20;

import { IERC1822ProxiableUpgradeable } from "../../interfaces/draft-IERC1822Upgradeable.sol";
import { ERC1967UtilsUpgradeable } from "../ERC1967/ERC1967UtilsUpgradeable.sol";
import "./Initializable.sol";

/**
 * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an
 * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.
 *
 * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is
 * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing
 * `UUPSUpgradeable` with a custom implementation of upgrades.
 *
 * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.
 */
abstract contract UUPSUpgradeable is Initializable, IERC1822ProxiableUpgradeable {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable __self = address(this);

    /**
     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`
     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,
     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.
     * If the getter returns `"5.0.0"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must
     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function
     * during an upgrade.
     */
    string public constant UPGRADE_INTERFACE_VERSION = "5.0.0";

    /**
     * @dev The call is from an unauthorized context.
     */
    error UUPSUnauthorizedCallContext();

    /**
     * @dev The storage `slot` is unsupported as a UUID.
     */
    error UUPSUnsupportedProxiableUUID(bytes32 slot);

    /**
     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is
     * a proxy contract with an implementation (as defined in ERC1967) pointing to self. This should only be the case
     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a
     * function through ERC1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to
     * fail.
     */
    modifier onlyProxy() {
        _checkProxy();
        _;
    }

    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        _checkNotDelegated();
        _;
    }

    function __UUPSUpgradeable_init() internal onlyInitializing {
    }

    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Implementation of the ERC1822 {proxiableUUID} function. This returns the storage slot used by the
     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.
     */
    function proxiableUUID() external view virtual notDelegated returns (bytes32) {
        return ERC1967UtilsUpgradeable.IMPLEMENTATION_SLOT;
    }

    /**
     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call
     * encoded in `data`.
     *
     * Calls {_authorizeUpgrade}.
     *
     * Emits an {Upgraded} event.
     *
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallUUPS(newImplementation, data);
    }

    /**
     * @dev Reverts if the execution is not performed via delegatecall or the execution
     * context is not of a proxy with an ERC1967-compliant implementation pointing to self.
     * See {_onlyProxy}.
     */
    function _checkProxy() internal view virtual {
        if (
            address(this) == __self || // Must be called through delegatecall
            ERC1967UtilsUpgradeable.getImplementation() != __self // Must be called through an active proxy
        ) {
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Reverts if the execution is performed via delegatecall.
     * See {notDelegated}.
     */
    function _checkNotDelegated() internal view virtual {
        if (address(this) != __self) {
            // Must not be called through delegatecall
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by
     * {upgradeToAndCall}.
     *
     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.
     *
     * ```solidity
     * function _authorizeUpgrade(address) internal onlyOwner {}
     * ```
     */
    function _authorizeUpgrade(address newImplementation) internal virtual;

    /**
     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.
     *
     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value
     * is expected to be the implementation slot in ERC1967.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {
        try IERC1822ProxiableUpgradeable(newImplementation).proxiableUUID() returns (bytes32 slot) {
            if (slot != ERC1967UtilsUpgradeable.IMPLEMENTATION_SLOT) {
                revert UUPSUnsupportedProxiableUUID(slot);
            }
            ERC1967UtilsUpgradeable.upgradeToAndCall(newImplementation, data);
        } catch {
            // The implementation is not UUPS
            revert ERC1967UtilsUpgradeable.ERC1967InvalidImplementation(newImplementation);
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.20;

import { IERC1155Upgradeable } from "./IERC1155Upgradeable.sol";
import { IERC1155ReceiverUpgradeable } from "./IERC1155ReceiverUpgradeable.sol";
import { IERC1155MetadataURIUpgradeable } from "./extensions/IERC1155MetadataURIUpgradeable.sol";
import { ContextUpgradeable } from "../../utils/ContextUpgradeable.sol";
import { IERC165Upgradeable, ERC165Upgradeable } from "../../utils/introspection/ERC165Upgradeable.sol";
import { ArraysUpgradeable } from "../../utils/ArraysUpgradeable.sol";
import { IERC1155ErrorsUpgradeable } from "../../interfaces/draft-IERC6093Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 */
abstract contract ERC1155Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC1155Upgradeable, IERC1155MetadataURIUpgradeable, IERC1155ErrorsUpgradeable {
    using ArraysUpgradeable for uint256[];
    using ArraysUpgradeable for address[];

    /// @custom:storage-location erc7201:openzeppelin.storage.ERC1155
    struct ERC1155Storage {
        mapping(uint256 id => mapping(address account => uint256)) _balances;

        mapping(address account => mapping(address operator => bool)) _operatorApprovals;

        // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
        string _uri;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC1155")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC1155StorageLocation = 0x88be536d5240c274a3b1d3a1be54482fd9caa294f08c62a7cde569f49a3c4500;

    function _getERC1155Storage() private pure returns (ERC1155Storage storage $) {
        assembly {
            $.slot := ERC1155StorageLocation
        }
    }

    /**
     * @dev See {_setURI}.
     */
    function __ERC1155_init(string memory uri_) internal onlyInitializing {
        __ERC1155_init_unchained(uri_);
    }

    function __ERC1155_init_unchained(string memory uri_) internal onlyInitializing {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
        return
            interfaceId == type(IERC1155Upgradeable).interfaceId ||
            interfaceId == type(IERC1155MetadataURIUpgradeable).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256 /* id */) public view virtual returns (string memory) {
        ERC1155Storage storage $ = _getERC1155Storage();
        return $._uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     */
    function balanceOf(address account, uint256 id) public view virtual returns (uint256) {
        ERC1155Storage storage $ = _getERC1155Storage();
        return $._balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] memory accounts,
        uint256[] memory ids
    ) public view virtual returns (uint256[] memory) {
        if (accounts.length != ids.length) {
            revert ERC1155InvalidArrayLength(ids.length, accounts.length);
        }

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts.unsafeMemoryAccess(i), ids.unsafeMemoryAccess(i));
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual returns (bool) {
        ERC1155Storage storage $ = _getERC1155Storage();
        return $._operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes memory data) public virtual {
        address sender = _msgSender();
        if (from != sender && !isApprovedForAll(from, sender)) {
            revert ERC1155MissingApprovalForAll(sender, from);
        }
        _safeTransferFrom(from, to, id, value, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) public virtual {
        address sender = _msgSender();
        if (from != sender && !isApprovedForAll(from, sender)) {
            revert ERC1155MissingApprovalForAll(sender, from);
        }
        _safeBatchTransferFrom(from, to, ids, values, data);
    }

    /**
     * @dev Transfers a `value` amount of tokens of type `id` from `from` to `to`. Will mint (or burn) if `from`
     * (or `to`) is the zero address.
     *
     * Emits a {TransferSingle} event if the arrays contain one element, and {TransferBatch} otherwise.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement either {IERC1155Receiver-onERC1155Received}
     *   or {IERC1155Receiver-onERC1155BatchReceived} and return the acceptance magic value.
     * - `ids` and `values` must have the same length.
     *
     * NOTE: The ERC-1155 acceptance check is not performed in this function. See {_updateWithAcceptanceCheck} instead.
     */
    function _update(address from, address to, uint256[] memory ids, uint256[] memory values) internal virtual {
        ERC1155Storage storage $ = _getERC1155Storage();
        if (ids.length != values.length) {
            revert ERC1155InvalidArrayLength(ids.length, values.length);
        }

        address operator = _msgSender();

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids.unsafeMemoryAccess(i);
            uint256 value = values.unsafeMemoryAccess(i);

            if (from != address(0)) {
                uint256 fromBalance = $._balances[id][from];
                if (fromBalance < value) {
                    revert ERC1155InsufficientBalance(from, fromBalance, value, id);
                }
                unchecked {
                    // Overflow not possible: value <= fromBalance
                    $._balances[id][from] = fromBalance - value;
                }
            }

            if (to != address(0)) {
                $._balances[id][to] += value;
            }
        }

        if (ids.length == 1) {
            uint256 id = ids.unsafeMemoryAccess(0);
            uint256 value = values.unsafeMemoryAccess(0);
            emit TransferSingle(operator, from, to, id, value);
        } else {
            emit TransferBatch(operator, from, to, ids, values);
        }
    }

    /**
     * @dev Version of {_update} that performs the token acceptance check by calling
     * {IERC1155Receiver-onERC1155Received} or {IERC1155Receiver-onERC1155BatchReceived} on the receiver address if it
     * contains code (eg. is a smart contract at the moment of execution).
     *
     * IMPORTANT: Overriding this function is discouraged because it poses a reentrancy risk from the receiver. So any
     * update to the contract state after this function would break the check-effect-interaction pattern. Consider
     * overriding {_update} instead.
     */
    function _updateWithAcceptanceCheck(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) internal virtual {
        _update(from, to, ids, values);
        if (to != address(0)) {
            address operator = _msgSender();
            if (ids.length == 1) {
                uint256 id = ids.unsafeMemoryAccess(0);
                uint256 value = values.unsafeMemoryAccess(0);
                _doSafeTransferAcceptanceCheck(operator, from, to, id, value, data);
            } else {
                _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, values, data);
            }
        }
    }

    /**
     * @dev Transfers a `value` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `value` amount.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes memory data) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value);
        _updateWithAcceptanceCheck(from, to, ids, values, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     * - `ids` and `values` must have the same length.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        _updateWithAcceptanceCheck(from, to, ids, values, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the values in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        ERC1155Storage storage $ = _getERC1155Storage();
        $._uri = newuri;
    }

    /**
     * @dev Creates a `value` amount of tokens of type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(address to, uint256 id, uint256 value, bytes memory data) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value);
        _updateWithAcceptanceCheck(address(0), to, ids, values, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `values` must have the same length.
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(address to, uint256[] memory ids, uint256[] memory values, bytes memory data) internal {
        if (to == address(0)) {
            revert ERC1155InvalidReceiver(address(0));
        }
        _updateWithAcceptanceCheck(address(0), to, ids, values, data);
    }

    /**
     * @dev Destroys a `value` amount of tokens of type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `value` amount of tokens of type `id`.
     */
    function _burn(address from, uint256 id, uint256 value) internal {
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        (uint256[] memory ids, uint256[] memory values) = _asSingletonArrays(id, value);
        _updateWithAcceptanceCheck(from, address(0), ids, values, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `value` amount of tokens of type `id`.
     * - `ids` and `values` must have the same length.
     */
    function _burnBatch(address from, uint256[] memory ids, uint256[] memory values) internal {
        if (from == address(0)) {
            revert ERC1155InvalidSender(address(0));
        }
        _updateWithAcceptanceCheck(from, address(0), ids, values, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the zero address.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        ERC1155Storage storage $ = _getERC1155Storage();
        if (operator == address(0)) {
            revert ERC1155InvalidOperator(address(0));
        }
        $._operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Performs an acceptance check by calling {IERC1155-onERC1155Received} on the `to` address
     * if it contains code at the moment of execution.
     */
    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 value,
        bytes memory data
    ) private {
        if (to.code.length > 0) {
            try IERC1155ReceiverUpgradeable(to).onERC1155Received(operator, from, id, value, data) returns (bytes4 response) {
                if (response != IERC1155ReceiverUpgradeable.onERC1155Received.selector) {
                    // Tokens rejected
                    revert ERC1155InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    // non-ERC1155Receiver implementer
                    revert ERC1155InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }

    /**
     * @dev Performs a batch acceptance check by calling {IERC1155-onERC1155BatchReceived} on the `to` address
     * if it contains code at the moment of execution.
     */
    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values,
        bytes memory data
    ) private {
        if (to.code.length > 0) {
            try IERC1155ReceiverUpgradeable(to).onERC1155BatchReceived(operator, from, ids, values, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155ReceiverUpgradeable.onERC1155BatchReceived.selector) {
                    // Tokens rejected
                    revert ERC1155InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    // non-ERC1155Receiver implementer
                    revert ERC1155InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }

    /**
     * @dev Creates an array in memory with only one value for each of the elements provided.
     */
    function _asSingletonArrays(
        uint256 element1,
        uint256 element2
    ) private pure returns (uint256[] memory array1, uint256[] memory array2) {
        /// @solidity memory-safe-assembly
        assembly {
            // Load the free memory pointer
            array1 := mload(0x40)
            // Set array length to 1
            mstore(array1, 1)
            // Store the single element at the next word after the length (where content starts)
            mstore(add(array1, 0x20), element1)

            // Repeat for next array locating it right after the first array
            array2 := add(array1, 0x40)
            mstore(array2, 1)
            mstore(add(array2, 0x20), element2)

            // Update the free memory pointer by pointing after the second array
            mstore(0x40, add(array2, 0x40))
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../../utils/introspection/IERC165Upgradeable.sol";

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155ReceiverUpgradeable is IERC165Upgradeable {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.20;

import { IERC165Upgradeable } from "../../utils/introspection/IERC165Upgradeable.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 */
interface IERC1155Upgradeable is IERC165Upgradeable {
    /**
     * @dev Emitted when `value` amount of tokens of type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the value of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] calldata accounts,
        uint256[] calldata ids
    ) external view returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers a `value` amount of tokens of type `id` from `from` to `to`.
     *
     * WARNING: This function can potentially allow a reentrancy attack when transferring tokens
     * to an untrusted contract, when invoking {onERC1155Received} on the receiver.
     * Ensure to follow the checks-effects-interactions pattern and consider employing
     * reentrancy guards when interacting with untrusted contracts.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `value` amount.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes calldata data) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     *
     * WARNING: This function can potentially allow a reentrancy attack when transferring tokens
     * to an untrusted contract, when invoking {onERC1155BatchReceived} on the receiver.
     * Ensure to follow the checks-effects-interactions pattern and consider employing
     * reentrancy guards when interacting with untrusted contracts.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `values` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external;
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/extensions/ERC1155Burnable.sol)

pragma solidity ^0.8.20;

import { ERC1155Upgradeable } from "../ERC1155Upgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {ERC1155} that allows token holders to destroy both their
 * own tokens and those that they have been approved to use.
 */
abstract contract ERC1155BurnableUpgradeable is Initializable, ERC1155Upgradeable {
    function __ERC1155Burnable_init() internal onlyInitializing {
    }

    function __ERC1155Burnable_init_unchained() internal onlyInitializing {
    }
    function burn(address account, uint256 id, uint256 value) public virtual {
        if (account != _msgSender() && !isApprovedForAll(account, _msgSender())) {
            revert ERC1155MissingApprovalForAll(_msgSender(), account);
        }

        _burn(account, id, value);
    }

    function burnBatch(address account, uint256[] memory ids, uint256[] memory values) public virtual {
        if (account != _msgSender() && !isApprovedForAll(account, _msgSender())) {
            revert ERC1155MissingApprovalForAll(_msgSender(), account);
        }

        _burnBatch(account, ids, values);
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.2) (token/ERC1155/extensions/ERC1155Pausable.sol)

pragma solidity ^0.8.20;

import { ERC1155Upgradeable } from "../ERC1155Upgradeable.sol";
import { PausableUpgradeable } from "../../../utils/PausableUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev ERC1155 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 *
 * IMPORTANT: This contract does not include public pause and unpause functions. In
 * addition to inheriting this contract, you must define both functions, invoking the
 * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate
 * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will
 * make the contract pause mechanism of the contract unreachable, and thus unusable.
 */
abstract contract ERC1155PausableUpgradeable is Initializable, ERC1155Upgradeable, PausableUpgradeable {
    function __ERC1155Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __ERC1155Pausable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {ERC1155-_update}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _update(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values
    ) internal virtual override whenNotPaused {
        super._update(from, to, ids, values);
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155Supply.sol)

pragma solidity ^0.8.20;

import { ERC1155Upgradeable } from "../ERC1155Upgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of ERC1155 that adds tracking of total supply per id.
 *
 * Useful for scenarios where Fungible and Non-fungible tokens have to be
 * clearly identified. Note: While a totalSupply of 1 might mean the
 * corresponding is an NFT, there is no guarantees that no other token with the
 * same id are not going to be minted.
 *
 * NOTE: This contract implies a global limit of 2**256 - 1 to the number of tokens
 * that can be minted.
 *
 * CAUTION: This extension should not be added in an upgrade to an already deployed contract.
 */
abstract contract ERC1155SupplyUpgradeable is Initializable, ERC1155Upgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC1155Supply
    struct ERC1155SupplyStorage {
        mapping(uint256 id => uint256) _totalSupply;
        uint256 _totalSupplyAll;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC1155Supply")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC1155SupplyStorageLocation = 0x4a593662ee04d27b6a00ebb31be7fe0c102c2ade82a7c5d764f2df05dc4e2800;

    function _getERC1155SupplyStorage() private pure returns (ERC1155SupplyStorage storage $) {
        assembly {
            $.slot := ERC1155SupplyStorageLocation
        }
    }

    function __ERC1155Supply_init() internal onlyInitializing {
    }

    function __ERC1155Supply_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Total value of tokens in with a given id.
     */
    function totalSupply(uint256 id) public view virtual returns (uint256) {
        ERC1155SupplyStorage storage $ = _getERC1155SupplyStorage();
        return $._totalSupply[id];
    }

    /**
     * @dev Total value of tokens.
     */
    function totalSupply() public view virtual returns (uint256) {
        ERC1155SupplyStorage storage $ = _getERC1155SupplyStorage();
        return $._totalSupplyAll;
    }

    /**
     * @dev Indicates whether any token exist with a given id, or not.
     */
    function exists(uint256 id) public view virtual returns (bool) {
        return totalSupply(id) > 0;
    }

    /**
     * @dev See {ERC1155-_update}.
     */
    function _update(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory values
    ) internal virtual override {
        ERC1155SupplyStorage storage $ = _getERC1155SupplyStorage();
        super._update(from, to, ids, values);

        if (from == address(0)) {
            uint256 totalMintValue = 0;
            for (uint256 i = 0; i < ids.length; ++i) {
                uint256 value = values[i];
                // Overflow check required: The rest of the code assumes that totalSupply never overflows
                $._totalSupply[ids[i]] += value;
                totalMintValue += value;
            }
            // Overflow check required: The rest of the code assumes that totalSupplyAll never overflows
            $._totalSupplyAll += totalMintValue;
        }

        if (to == address(0)) {
            uint256 totalBurnValue = 0;
            for (uint256 i = 0; i < ids.length; ++i) {
                uint256 value = values[i];

                unchecked {
                    // Overflow not possible: values[i] <= balanceOf(from, ids[i]) <= totalSupply(ids[i])
                    $._totalSupply[ids[i]] -= value;
                    // Overflow not possible: sum_i(values[i]) <= sum_i(totalSupply(ids[i])) <= totalSupplyAll
                    totalBurnValue += value;
                }
            }
            unchecked {
                // Overflow not possible: totalBurnValue = sum_i(values[i]) <= sum_i(totalSupply(ids[i])) <= totalSupplyAll
                $._totalSupplyAll -= totalBurnValue;
            }
        }
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155URIStorage.sol)

pragma solidity ^0.8.20;

import { StringsUpgradeable } from "../../../utils/StringsUpgradeable.sol";
import { ERC1155Upgradeable } from "../ERC1155Upgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev ERC1155 token with storage based token URI management.
 * Inspired by the ERC721URIStorage extension
 */
abstract contract ERC1155URIStorageUpgradeable is Initializable, ERC1155Upgradeable {
    using StringsUpgradeable for uint256;

    /// @custom:storage-location erc7201:openzeppelin.storage.ERC1155URIStorage
    struct ERC1155URIStorageStorage {
        // Optional base URI
        string _baseURI;

        // Optional mapping for token URIs
        mapping(uint256 tokenId => string) _tokenURIs;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC1155URIStorage")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC1155URIStorageStorageLocation = 0x89fc852226e759c7c636cf34d732f0198fc56a54876b2374a52beb7b0c558600;

    function _getERC1155URIStorageStorage() private pure returns (ERC1155URIStorageStorage storage $) {
        assembly {
            $.slot := ERC1155URIStorageStorageLocation
        }
    }

    function __ERC1155URIStorage_init() internal onlyInitializing {
        __ERC1155URIStorage_init_unchained();
    }

    function __ERC1155URIStorage_init_unchained() internal onlyInitializing {
        ERC1155URIStorageStorage storage $ = _getERC1155URIStorageStorage();
        $._baseURI = "";
    }
    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the concatenation of the `_baseURI`
     * and the token-specific uri if the latter is set
     *
     * This enables the following behaviors:
     *
     * - if `_tokenURIs[tokenId]` is set, then the result is the concatenation
     *   of `_baseURI` and `_tokenURIs[tokenId]` (keep in mind that `_baseURI`
     *   is empty per default);
     *
     * - if `_tokenURIs[tokenId]` is NOT set then we fallback to `super.uri()`
     *   which in most cases will contain `ERC1155._uri`;
     *
     * - if `_tokenURIs[tokenId]` is NOT set, and if the parents do not have a
     *   uri value set, then the result is empty.
     */
    function uri(uint256 tokenId) public view virtual override returns (string memory) {
        ERC1155URIStorageStorage storage $ = _getERC1155URIStorageStorage();
        string memory tokenURI = $._tokenURIs[tokenId];

        // If token URI is set, concatenate base URI and tokenURI (via string.concat).
        return bytes(tokenURI).length > 0 ? string.concat($._baseURI, tokenURI) : super.uri(tokenId);
    }

    /**
     * @dev Sets `tokenURI` as the tokenURI of `tokenId`.
     */
    function _setURI(uint256 tokenId, string memory tokenURI) internal virtual {
        ERC1155URIStorageStorage storage $ = _getERC1155URIStorageStorage();
        $._tokenURIs[tokenId] = tokenURI;
        emit URI(uri(tokenId), tokenId);
    }

    /**
     * @dev Sets `baseURI` as the `_baseURI` for all tokens
     */
    function _setBaseURI(string memory baseURI) internal virtual {
        ERC1155URIStorageStorage storage $ = _getERC1155URIStorageStorage();
        $._baseURI = baseURI;
    }
}


// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.20;

import { IERC1155Upgradeable } from "../IERC1155Upgradeable.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 */
interface IERC1155MetadataURIUpgradeable is IERC1155Upgradeable {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}
